Keeping the dream alive: Managing the Space Station Program, 1982 to 1986

The management is described and analyzed of the formative years of the NASA Space Station Program (1982 to 1986), beginning with the successful initiative for program approval by Administrator James M. Beggs through to the decision to bring program management to Reston, Virginia. Emphasis is on internal management issues related to the implementation of the various phases of the program. Themes examined are the problem of bringing programmatic and institutional interests together and focusing them to forward the program; centralized versus decentralized control of the program; how the history of NASA and of the individual installations affected the decisions made; and the pressure from those outside NASA. The four sections are: (1) the decision to build the space station, (2) the design of the management experiment, (3) the experiment comes to life, and (4) the decision reversal

Bounds on the Compactness of Neutron Stars from Brightness Oscillations

The discovery of high-amplitude brightness oscillations at the spin frequency or its first overtone in six neutron stars in low-mass X-ray binaries during type~1 X-ray bursts provides a powerful new way to constrain the compactness of these stars, and hence to constrain the equation of state of the dense matter in all neutron stars. Here we present the results of general relativistic calculations of the maximum fractional rms amplitudes that can be observed during bursts. In particular, we determine the dependence of the amplitude on the compactness of the star, the angular dependence of the emission from the surface, the rotational velocity at the stellar surface, and whether there are one or two emitting poles. We show that if two poles are emitting, as is strongly indicated by independent evidence in 4U 1636-536 and KS 1731-26, the resulting limits on the compactness of the star can be extremely restrictive. We also discuss the expected amplitudes of X-ray color oscillations and the observational signatures necessary to derive convincing constraints on neutron star compactness from the amplitudes of burst oscillations.Comment: 8 pages plus one figure, AASTeX v. 4.0, submitted to The Astrophysical Journal Letter

Practitioners Corner: A Call to Action!

This article briefly discusses the nature of the relationship between scholars, practitioners, and practitioner-scholars in terms of the generation of behavioral science knowledge and the development of theory. It also discusses the scope for, and process by which, practitioners and scholar-practitioners can become more directly and actively involved in contributing to The Journal of Applied Behavioral Science via a new section called “Practitioner Corner.

Electromagnetic field application to underground power cable detection

Before commencing excavation or other work where power or other cables may be buried, it is important to determine the location of cables to ensure that they are not damaged. This paper describes a method of power-cable detection and location that uses measurements of the magnetic field produced by the currents in the cable, and presents the results of tests performed to evaluate the method. The cable detection and location program works by comparing the measured magnetic field signal with values predicted using a simple numerical model of the cable. Search coils are used as magnetic field sensors, and a measurement system is setup to measure the magnetic field of an underground power cable at a number of points above the ground so that it can detect the presence of an underground power cable and estimate its position. Experimental investigations were carried out using a model and under real site test conditions. The results show that the measurement system and cable location method give a reasonable prediction for the position of the target cable

Detection and Location of Underground Power Cable using Magnetic Field Technologies

The location of buried underground electricity cables is becoming a major engineering and social issue worldwide. Records of utility locations are relatively scant, and even when records are available, they almost always refer to positions relative to ground-level physical features that may no longer exist or that may have been moved or altered. The lack of accurate positioning records of existing services can cause engineering and construction delays and safety hazards when new construction, repairs, or upgrades are necessary. Hitting unknown underground obstructions has the potential to cause property damage, injuries and, even deaths. Thus, before commencing excavation or other work where power or other cables may be buried, it is important to determine the location of the cables to ensure that they are not damaged during the work. This paper describes the use of an array of passive magnetic sensors (induction coils) together with signal processing techniques to detect and locate underground power cables. The array consists of seven identical coils mounted on a support frame; one of these coils was previously tested under laboratory conditions, and relevant results have been published in [1]. A measurement system was constructed that uses a battery powered data acquisition system with two NI 9239 modules connected to the coil array, and controlled by a laptop. The system is designed to measure the magnetic field of an underground power cable at a number of points above the ground. A 3 by 3 m test area was chosen in one of our campus car parks. This area was chosen because the university’s utility map shows an isolated power cable there. Measurements were taken with the array in 16 different test positions, and compared with the values predicted for a long straight horizontal cable at various positions. Finally, error maps were plotted for different Z-coordinate values, showing the minimum fitting error for each position in this plane. One such map is shown in Figure 1; the low error values of 4-5% give a high degree of confidence that most of the measured signal is due to a cable near to these positions. This view is supported by the fact that the university’s utility map shows the cable at X = 1.4 m, and by amplitude measurements taken with a hand-held magnetic field meter

A 2D systems approach to iterative learning control for discrete linear processes with zero Markov parameters

In this paper a new approach to iterative learning control for the practically relevant case of deterministic discrete linear plants with uniform rank greater than unity is developed. The analysis is undertaken in a 2D systems setting that, by using a strong form of stability for linear repetitive processes, allows simultaneous con-sideration of both trial-to-trial error convergence and along the trial performance, resulting in design algorithms that can be computed using Linear Matrix Inequalities (LMIs). Finally, the control laws are experimentally verified on a gantry robot that replicates a pick and place operation commonly found in a number of applications to which iterative learning control is applicable

The home independence program with non-health professionals as care managers: An evaluation

The Home Independence Program (HIP), an Australian restorative home care/reablement service for older adults, has been shown to be effective in reducing functional dependency and increasing functional mobility, confidence in everyday activities, and quality of life. These gains were found to translate into a reduced need for ongoing care services and reduced health and aged care costs over time. Despite these positive outcomes, few Australian home care agencies have adopted the service model – a key reason being that few Australian providers employ health professionals, who act as care managers under the HIP service model. A call for proposals from Health Workforce Australia for projects to expand the scope of practice of health/aged care staff then provided the opportunity to develop, implement, and evaluate a service delivery model, in which nonprofessionals replaced the health professionals as Care Managers in the HIP service. Seventy older people who received the HIP Coordinator (HIPC) service participated in the outcomes evaluation. On a range of personal outcome measures, the group showed statistically significant improvement at 3 and 12 months compared to baseline. On each outcome, the improvement observed was larger than that observed in a previous trial in which the service was delivered by health professionals.However, differences in the timing of data collection between the two studies mean that a direct comparison cannot be made. Clients in both studies showed a similarly reduced need for ongoing home care services at both follow-up points. The outcomes achieved by HIPC, with non-health professionals as Care Managers, were positive and can be considered to compare favorably with the outcomes achieved in HIP when health professionals take the Care Manager role. These findings will be of interest to managers of home care services and to policy makers interested in reducing the long-term care needs of older community dwelling individuals

Sensory mechanotransduction at membrane-matrix interfaces

Sensory cells specialized to detect extremely small mechanical changes are common to the auditory and somatosensory systems. It is widely accepted that mechanosensitive channels form the core of the mechanoelectrical transduction in hair cells as well as the somatic sensory neurons that underlie the sense of touch and mechanical pain. Here, we will review how the activation of such channels can be measured in a meaningful physiological context. In particular, we will discuss the idea that mechanosensitive channels normally occur in transmembrane complexes that are anchored to extracellular matrix components (ECM) both in vitro and in vivo. One component of such complexes in sensory neurons is the integral membrane scaffold protein STOML3 which is a robust physiological regulator of native mechanosensitive currents. In order to better characterize such channels in transmembrane complexes, we developed a new electrophysiological method that enables the quantification of mechanosensitive current amplitude and kinetics when activated by a defined matrix movement in cultured cells. The results of such studies strongly support the idea that ion channels in transmembrane complexes are highly tuned to detect movement of the cell membrane in relation to the ECM