9 research outputs found
Investigation of the Behavior of Hydrogen in the Aluminum Alloy in the Manufacture of Small Pigs at the Aluminum Plant UC RUSAL
В статье приведены результаты исследований динамики насыщения алюминия и его
сплавов водородом в технологической схеме от алюминиевого электролизера до литейного
конвейера в условиях Саяногорского алюминиевого завода ОК РУСАЛ. Показано, что
одним из основных источников насыщения расплава алюминия водородом является
его взаимодействие с влагой воздуха при открытых переливах металла в процессе его
движения от электролизера до литейного конвейера. По результатам обследования
предложены технические решения, направленные на снижение концентрации водорода в
расплаве, которые составят предмет дальнейших исследованийThe results of studies of aluminum saturation dynamics and its alloys with hydrogen in
the technological scheme of the electrolytic aluminum to the casting assembly line in a steel
plant RUSAL. It was shown that one of the basic aluminum melt saturation hydrogen source
is its interaction with moisture of air in open metal modulations during its movement from the
electrolyzer molds. According to a survey of proposed technical solutions to reduce the hydrogen
concentration in the melt during further investigation
Study of the Effects of Modifying Additives on the Properties of Nonstick Coating for Iron and Steel Casting
В статье приведены результаты влияния мусковита как модифицирующей добавки к
механоактивированным бентонитовым глинам различных месторождений, повышающим
электростатические характеристики водных суспензий на их основе для увеличения
стабильности коллоидных систем, применяемых в противопригарных покрытиях для
стального и чугунного литьяThe paper presents results of the effect of muscovite as a modifying agent to mechanically activated
bentonite clays of different fields. It modifying additive increasing the electrostatic characteristics of
the aqueous suspensions based on them, in order to increase the stability of colloidal systems, used in
nonstick coatings for production steel and iron castin
Study Modification Technology for Casting Flat Bars 5XXX Series
В статье изложены результаты исследования влияния концентрации лигатуры в расплаве
по сечению металлотракта на измельчение структуры слитка при полунепрерывным литье
для двух вариантов подачи лигатуры, контроль модифицирующей способности методом
ТР-1, а также представлена компьютерная модель распределения частиц лигатуры вдоль
металлотракта. Дан анализ полученных результатов и сделан выбор рациональных вариантов
подачи лигатурыThe article presents the results of investigation of influence of the concentration of ligatures in the
melt over the cross section metallotrakta on structure refinement ingot at a semi-continuous casting
for the two feeding options ligatures, modifying control ability by TR-1, and also presented a computer
model of ligature of the particle distribution along metallotrakta. The analysis of the results and make
a choice of rational variants of ligatures suppl
Study of change in the scm's strength properties depending on the aqueous-clay suspension's concentration and muscovite's amount in its composition
Текст статьи не публикуется в открытом доступе в соответствии с политикой журнала.This article represents the results of the study of
change in aqueous clay suspensions' (ACS) electrostatic
properties depending on muscovite's concentration in their
composition. The influence of ACS' concentration and
muscovite's varied amounts in the composition of mechanically
activated bentonite clay (Chernogorskoe field) used as a
coupling agent in molding sand mixtures for steel and
cast ironcasting, on the mixture's strength properties has been
studied. The increase in the sand-clay mixture's (SCM)
strengthproperties and gas permeability depending on the ACS's
and muscovite's concentration has been establishe
Study of change in the scm's strength properties depending on the aqueous-clay suspension's concentration and muscovite's amount in its composition
Текст статьи не публикуется в открытом доступе в соответствии с политикой журнала.This article represents the results of the study of
change in aqueous clay suspensions' (ACS) electrostatic
properties depending on muscovite's concentration in their
composition. The influence of ACS' concentration and
muscovite's varied amounts in the composition of mechanically
activated bentonite clay (Chernogorskoe field) used as a
coupling agent in molding sand mixtures for steel and
cast ironcasting, on the mixture's strength properties has been
studied. The increase in the sand-clay mixture's (SCM)
strengthproperties and gas permeability depending on the ACS's
and muscovite's concentration has been establishe
Study of the Effects of Modifying Additives on the Properties of Nonstick Coating for Iron and Steel Casting
В статье приведены результаты влияния мусковита как модифицирующей добавки к
механоактивированным бентонитовым глинам различных месторождений, повышающим
электростатические характеристики водных суспензий на их основе для увеличения
стабильности коллоидных систем, применяемых в противопригарных покрытиях для
стального и чугунного литьяThe paper presents results of the effect of muscovite as a modifying agent to mechanically activated
bentonite clays of different fields. It modifying additive increasing the electrostatic characteristics of
the aqueous suspensions based on them, in order to increase the stability of colloidal systems, used in
nonstick coatings for production steel and iron castin
Utilization of recycled sulphidic molybdenum ores for production of low-fired porcelain
This article presents a description of one of the promising applications of overburden pegmatites and quartzofeldspathic tailings from molybdenum ore at Sorsky GOK copper and molybdenum mining complex in the production of low-fired porcelain. The proposal is to move away from exploiting natural fluxes which are becoming scarce, replacing them with secondary material resources. Presence of potassium and sodium in the chemical composition of pegmatites and quartzofeldspathic sand in feldspar may produce a viscous mass in a reasonably low temperature melt, contributing to the dissolution of quartz and clay matter. The research work presented below offers a solution to the challenge of replacing the classic porcelain mass (kaolin-quartz-fluxing agent) with industrial products by implementing a porcelain molding process. If the quartzofeldspathic tailings mass percent in porcelain ceramics is 45, a minimum water absorption of 0.84 percent is reached for the sintered ceramics. This optimizes the porcelain material composition and the mass percent (kaolin clay 60-50, quartzofeldspathic sand 35-45, cullet 5), as well as the sintering process parameters (firing temperature is 1,175 °С, isothermal exposure is two hours). A flow chart has been developed for achieving semiporcelain products with the water absorption of 0.8-5 mass percent
Investigation of the Behavior of Hydrogen in the Aluminum Alloy in the Manufacture of Small Pigs at the Aluminum Plant UC RUSAL
В статье приведены результаты исследований динамики насыщения алюминия и его
сплавов водородом в технологической схеме от алюминиевого электролизера до литейного
конвейера в условиях Саяногорского алюминиевого завода ОК РУСАЛ. Показано, что
одним из основных источников насыщения расплава алюминия водородом является
его взаимодействие с влагой воздуха при открытых переливах металла в процессе его
движения от электролизера до литейного конвейера. По результатам обследования
предложены технические решения, направленные на снижение концентрации водорода в
расплаве, которые составят предмет дальнейших исследованийThe results of studies of aluminum saturation dynamics and its alloys with hydrogen in
the technological scheme of the electrolytic aluminum to the casting assembly line in a steel
plant RUSAL. It was shown that one of the basic aluminum melt saturation hydrogen source
is its interaction with moisture of air in open metal modulations during its movement from the
electrolyzer molds. According to a survey of proposed technical solutions to reduce the hydrogen
concentration in the melt during further investigation
Study Modification Technology for Casting Flat Bars 5XXX Series
В статье изложены результаты исследования влияния концентрации лигатуры в расплаве
по сечению металлотракта на измельчение структуры слитка при полунепрерывным литье
для двух вариантов подачи лигатуры, контроль модифицирующей способности методом
ТР-1, а также представлена компьютерная модель распределения частиц лигатуры вдоль
металлотракта. Дан анализ полученных результатов и сделан выбор рациональных вариантов
подачи лигатурыThe article presents the results of investigation of influence of the concentration of ligatures in the
melt over the cross section metallotrakta on structure refinement ingot at a semi-continuous casting
for the two feeding options ligatures, modifying control ability by TR-1, and also presented a computer
model of ligature of the particle distribution along metallotrakta. The analysis of the results and make
a choice of rational variants of ligatures suppl