Continuous monitor for gas ratios in a mixture

Fluidic oscillator, incorporating piezoelectric transducer to sense molecular weight of gas mixture, is used to continuously monitor ratio of a mixture of two gases in a flowing system. Device is lightweight, compact, reliable, easy to install, and also produces a simple output signal for controller. Frequency of oscillation is measured and signal converted to ac output

A Characterization of Infinite LSP Words

G. Fici proved that a finite word has a minimal suffix automaton if and only if all its left special factors occur as prefixes. He called LSP all finite and infinite words having this latter property. We characterize here infinite LSP words in terms of $S$-adicity. More precisely we provide a finite set of morphisms $S$ and an automaton ${\cal A}$ such that an infinite word is LSP if and only if it is $S$-adic and all its directive words are recognizable by ${\cal A}$

Photoassociation of a cold atom-molecule pair: long-range quadrupole-quadrupole interactions

The general formalism of the multipolar expansion of electrostatic interactions is applied to the calculation the potential energy between an excited atom (without fine structure) and a ground state diatomic molecule at large separations. Both partners exhibit a permanent quadrupole moment, so that their mutual quadrupole-quadrupole long-range interaction is attractive enough to bind trimers. Numerical results are given for an excited Cs(6P) atom and a ground state Cs2 molecule. The prospects for achieving photoassociation of a cold atom/dimer pair is thus discussed and found promising. The formalism can be easily generalized to the long-range interaction between molecules to investigate the formation of cold tetramers.Comment: 5 figure

Search for magnetic fields in particle-accelerating colliding-wind binaries

Some colliding-wind massive binaries, called particle-accelerating colliding-wind binaries (PACWB), exhibit synchrotron radio emission, which is assumed to be generated by a stellar magnetic field. However, no measurement of magnetic fields in these stars has ever been performed. We aim at quantifying the possible stellar magnetic fields present in PACWB to provide constraints for models. We gathered 21 high-resolution spectropolarimetric observations of 9 PACWB available in the ESPaDOnS, Narval and HarpsPol archives. We analysed these observations with the Least Squares Deconvolution method. We separated the binary spectral components when possible. No magnetic signature is detected in any of the 9 PACWB stars and all longitudinal field measurements are compatible with 0 G. We derived the upper field strength of a possible field that could have remained hidden in the noise of the data. While the data are not very constraining for some stars, for several stars we could derive an upper limit of the polar field strength of the order of 200 G. We can therefore exclude the presence of strong or moderate stellar magnetic fields in PACWB, typical of the ones present in magnetic massive stars. Weak magnetic fields could however be present in these objects. These observational results provide the first quantitative constraints for future models of PACWB.Comment: Accepted in A&

Infrared-temperature variability in a large agricultural field

The combined effect of water carved gullies, varying soil color, moisture state of the soil and crop, nonuniform phenology, and bare spots was measured for commercially grown barley planted on varying terrain. For all but the most rugged terrain, over 80% of the area within 4, 16, 65, and 259 ha cells was at temperatures within 3 C of the mean cell temperature. The result of using relatively small, 4 ha instantaneous field of views for remote sensing applications is that either the worst or the best of conditions is often observed. There appears to be no great advantage in utilizing a small instantaneous field of view instead of a large one for remote sensing of crop canopy temperatures. The two alternatives for design purposes are then either a very high spatial resolution, of the order of a meter or so, where the field is very accurately temperature mapped, or a low resolution, where the actual size seems to make little difference

Airborne observed solar elevation and row direction effects on the near-IR/red ratio of cotton

An airborne multispectral scanner was used to obtain data over two adjacent cotton fields having rows perpendicular to one another, at three times of day (different solar elevations), and on two dates (different plant size). The near IR/red ratios were displayed in image form, so that within-field variations and differences between fields could be easily assessed. The ratio varied with changing Sun elevation for north-south oriented rows, but no variation was detected for east-west oriented rows

A gas-liquid solid phase peptide and protein sequenator

A new miniaturized protein and peptide sequenator has been constructed which uses gas phase reagents at the coupling and cleavage steps of the Edman degradation. The sample is embedded in a matrix of Polybrene dried onto a porous glass fiber disc located in a small cartridge-style reaction cell. The protein or peptide, though not covalently attached to the support, is essentially immobile throughout the degradative cycle, since only relatively apolar, liquid phase solvents pass through the cell. This instrument can give useful sequence data on as little as 5 pmol or protein, can perform extended sequence runs (greater than 30 residues) on subnanomole quantities of proteins purified by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and can sequence hydrophobic peptides to completion. The sequenator is characterized by a high repetitive yield during the degradation, low reagent consumption, low maintenance requirements, and a degradative cycle time of only 50 min using a complete double cleavage program

Solid-fluid phase transformation within grain boundaries during compaction by pressure solution

The overall compaction of porous rocks due to intergranular pressure solution (IPS) results from the dissolution of minerals within contact regions and the diffusive transport through the grain boundary of the dissolved species towards the fluid-filled pore space. The grain boundary structure can be imagined to be composed of dry contact zones, thin fluid films and fluid-filled cavities. The connectiveness and tortuosity of this structure determine the effective diffusivity of grain contacts and thus the potential of porous rock to compact by the action of IPS. The evolution in time of the grain-boundary structure, and thus of the effective diffusivity, is discussed here with the help of two 2D initial- and boundary-value problems which are solved by analytical and numerical means. The evolution of the solid–fluid interfaces within the grain boundary is governed by a phase transformation between the non-hydrostatically stressed elastic solid and the trapped fluid assumed in mechanical equilibrium. The characteristic time is provided by a linear kinetic law. The evolution of the structure away from a state of thermodynamic equilibrium during a loading normal to the grain boundary is found to occur in two steps. The first one consists of a diffuse morphology evolution in time and results in an enhancement of any initial stress concentration. The second step is characterized by a rapid and localized dissolution in the region of stress concentration. The latency period prior to localization is governed by the magnitude of the non-hydrostatic remote stress as well as the microstructural geometric factor responsible for the initial stress concentration at the solid–fluid interface. The localized dissolution is shown to provide a mechanism for the fluid to penetrate a previously dry contact region by marginal dissolution and thus to create a fluid film. However, the newly formed thin fluid layer is found to be unstable pointing to a possible repeated reorganization or dynamic evolution of the grain boundary internal structure during the action of IPS

Predicting scattering properties of ultracold atoms: adiabatic accumulated phase method and mass scaling

Ultracold atoms are increasingly used for high precision experiments that can be utilized to extract accurate scattering properties. This calls for a stronger need to improve on the accuracy of interatomic potentials, and in particular the usually rather inaccurate inner-range potentials. A boundary condition for this inner range can be conveniently given via the accumulated phase method. However, in this approach one should satisfy two conditions, which are in principle conflicting, and the validity of these approximations comes under stress when higher precision is required. We show that a better compromise between the two is possible by allowing for an adiabatic change of the hyperfine mixing of singlet and triplet states for interatomic distances smaller than the separation radius. A mass scaling approach to relate accumulated phase parameters in a combined analysis of isotopically related atom pairs is described in detail and its accuracy is estimated, taking into account both Born-Oppenheimer and WKB breakdown. We demonstrate how numbers of singlet and triplet bound states follow from the mass scaling.Comment: 14 pages, 9 figure