Removal of Water Binding Proteins from Dentin Increases the Adhesion Strength of Low-Hydrophilicity Dental Resins

Objectives To investigate the role of proteoglycans (PGs) on the physical properties of the dentin matrix and the bond strength of methacrylate resins with varying hydrophilicities. Methods Dentin were obtained from crowns of human molars. Enzymatic removal of PGs followed a standard protocol using 1 mg/mL trypsin (Try) for 24 h. Controls were incubated in ammonium bicarbonate buffer. Removal of PGs was assessed by visualization of glycosaminoglycan chains (GAGs) in dentin under transmission electron microscopy (TEM). The dentin matrix swelling ratio was estimated using fully demineralized dentin. Dentin wettability was assessed on wet, dry and re-wetted dentin surfaces through water contact angle measurements. Microtensile bond strength test (TBS) was performed with experimental adhesives containing 6% HEMA (H6) and 18% HEMA (H18) and a commercial dental adhesive. Data were statistically analyzed using ANOVA and post-hoc tests (α = 0.05). Results The enzymatic removal of PGs was confirmed by the absence and fragmentation of GAGs. There was statistically significant difference between the swelling ratio of Try-treated and control dentin (p \u3c 0.001). Significantly lower contact angle was found for Try-treated on wet and dry dentin (p \u3c 0.002). The contact angle on re-wet dentin was not recovered in Try-treated group (p = 0.9). Removal of PGs significantly improved the TBS of H6 (109% higher, p \u3c 0.001) and H18 (29% higher, p = 0.002) when compared to control. The TBS of commercial adhesive was not affected by trypsin treatment (p = 0.9). Significance Changing the surface energy of dentin by PGs removal improved resin adhesion, likely due to more efficient water displacement, aiding to improved resin infiltration and polymerization

Bonding Crowns and Bridges with Resin Cement

Background Bonding crowns and bridges with resin cement can improve retention and reinforcement of the restoration. However, there is variation in the steps taken by different practitioners to achieve this goal. Methods The authors developed a survey on bonding dental crowns and bridges with resin cement and distributed it electronically to the American Dental Association Clinical Evaluators (ACE) Panel on May 22, 2020. The survey remained open for 2 weeks. Descriptive data analysis was conducted using SAS Version 9.4. Results A total of 326 panelists responded to the survey, and 86% of respondents who place crowns or bridges use resin cements for bonding. When placing a lithium disilicate restoration, an almost equal proportion of respondents etch it with hydrofluoric acid in their office or asked the laboratory to do it for them, and more than two-thirds use a silane primer before bonding. For zirconia restorations, 70% reported their restorations are sandblasted in the laboratory, and 39% use a primer containing 10-methacryloyloxydecyl dihydrogen phosphate. One-half of respondents clean their lithium disilicate or zirconia restorations with a cleaning solution. Resin cements used with a primer in the etch-and-rinse mode are the most widely used. The technique used to cure and clean excess resin cement varies among respondents. Conclusions The types of resin cements used, tooth preparation, crown or bridge preparation, and bonding technique vary among this sample. Practical Implications Although many dentists bond crowns and bridges on the basis of best practices, improvement in the process may be achieved by dentists communicating with their laboratory to confirm the steps performed there, ensuring an effective cleaning technique is used after try-in and verifying that the correct primer is used with their chosen restorative material

Encapsulation of grape seed extract in polylactide microcapsules for sustained bioactivity and time-dependent release in dental material applications

Objective. To sustain the bioactivity of proanthocyanidins-rich plant-derived extracts via encapsulation within biodegradable polymer microcapsules

Long-term evaluation of the stability of dentin matrix following treatments with aqueous solutions of titanium tetrafluoride at different concentrations

Objective: The purpose of this study was to investigate the effects of aqueous solutions of different concentrations of titanium tetrafluoride (TiF4) on dentin matrix stability up to six months

Biostability of the Proanthocyanidins-Dentin Complex and Adhesion Studies

Oligomeric proanthocyanidins (OPACs) are potent and renewable natural bioactives possible to be refined into chemically standardized mixtures for biological applications. Herein, we found that multiscale interactions of OPACs with the dentin matrix create tight biointerfaces with hydrophobic methacrylate adhesives on wet surfaces. An enriched mixture of OPACs, with a known phytochemical profile, was produced from grape seed crude extract (Vitis vinifera; enriched grape seed extract [e-GSE]) and applied to dentin matrices to determine changes to the mechanical properties and biodegradability of the dentin matrix and favorable resin adhesion mechanisms. Methods included a 3-point flexural test, quantification of hydroxyproline (collagen solubilization), static and dynamic nanomechanical analyses, resin-dentin microtensile bond strength, and micropermeability at the adhesive interface. The e-GSE-modified dentin matrix exhibited remarkably low collagen solubilization and sustained the bulk elastic properties over 12 mo. Tan δ findings reveal a more elastic-like behavior of the e-GSE-modified dentin matrix, which was not affected by H-bond destabilization by urea. Dentin-methacrylate biointerfaces with robust and stable adhesion were created on e-GSE-primed dentin surfaces, leading to a dramatic decrease of the interfacial permeability. Standardized OPAC mixtures provide a new mechanism of adhesion to type I collagen–rich tissues that does not rely on hydrophilic monomers. The bioadhesion mechanism involves physicochemical modifications to the dentin matrix, reduced tissue biodegradation, and bridging to methacrylate resins

Targeting Trimeric and Tetrameric Proanthocyanidins of \u3cem\u3eCinnamomum verum\u3c/em\u3e Bark as Bioactives for Dental Therapies

The present study elucidated the structures of three A-type tri- and tetrameric proanthocyanidins (PACs) isolated from Cinnamomum verum bark to the level of absolute configuration and determined their dental bioactivity using two therapeutically relevant bioassays. After selecting a PAC oligomer fraction via a biologically diverse bioassay-guided process, in tandem with centrifugal partition chromatography, phytochemical studies led to the isolation of PAC oligomers that represent the main bioactive principles of C. verum: two A-type tetrameric PACs, epicatechin-(2β→O→7,4β→8)-epicatechin-(4β→6)-epicatechin-(2β→O→7,4β→8)-catechin (1) and parameritannin A1 (2), together with a trimer, cinnamtannin B1 (3). Structure determination of the underivatized proanthocyanidins utilized a combination of HRESIMS, ECD, 1D/2D NMR, and 1H iterative full spin analysis data and led to NMR-based evidence for the deduction of absolute configuration in constituent catechin and epicatechin monomeric units

Biostability of the Proanthocyanidins-Dentin Complex and Adhesion Studies

Oligomeric proanthocyanidins (OPACs) are potent and renewable natural bioactives possible to be refined into chemically standardized mixtures for biological applications. Herein, we found that multiscale interactions of OPACs with the dentin matrix create tight biointerfaces with hydrophobic methacrylate adhesives on wet surfaces. An enriched mixture of OPACs, with a known phytochemical profile, was produced from grape seed crude extract (Vitis vinifera; enriched grape seed extract [e-GSE]) and applied to dentin matrices to determine changes to the mechanical properties and biodegradability of the dentin matrix and favorable resin adhesion mechanisms. Methods included a 3-point flexural test, quantification of hydroxyproline (collagen solubilization), static and dynamic nanomechanical analyses, resin-dentin microtensile bond strength, and micropermeability at the adhesive interface. The e-GSE-modified dentin matrix exhibited remarkably low collagen solubilization and sustained the bulk elastic properties over 12 mo. Tan delta findings reveal a more elastic-like behavior of the e-GSE-modified dentin matrix, which was not affected by H-bond destabilization by urea. Dentin-methacrylate biointerfaces with robust and stable adhesion were created on e-GSE-primed dentin surfaces, leading to a dramatic decrease of the interfacial permeability. Standardized OPAC mixtures provide a new mechanism of adhesion to type I collagen-rich tissues that does not rely on hydrophilic monomers. The bioadhesion mechanism involves physicochemical modifications to the dentin matrix, reduced tissue biodegradation, and bridging to methacrylate resins