Input filter compensation for switching regulators

The problems caused by the interaction between the input filter, output filter, and the control loop are discussed. The input filter design is made more complicated because of the need to avoid performance degradation and also stay within the weight and loss limitations. Conventional input filter design techniques are then dicussed. The concept of pole zero cancellation is reviewed; this concept is the basis for an approach to control the peaking of the output impedance of the input filter and thus mitigate some of the problems caused by the input filter. The proposed approach for control of the peaking of the output impedance of the input filter is to use a feedforward loop working in conjunction with feedback loops, thus forming a total state control scheme. The design of the feedforward loop for a buck regulator is described. A possible implementation of the feedforward loop design is suggested

Specific heat of single crystal MgB_2: a two-band superconductor with two different anisotropies

Heat-capacity measurements of a 39 microgramm MgB_2 single crystal in fields up to 14 T and below 3 K allow the determination of the low-temperature linear term of the specific heat, its field dependence and its anisotropy. Our results are compatible with two-band superconductivity, the band carrying the small gap being isotropic, that carrying the large gap having an anisotropy of ~ 5. Three different upper critical fields are thus needed to describe the superconducting state of MgB2.Comment: 4 pages, 4 figures - V2: Bibliography updated and some typo corrected. One reference added - V3: version accepted for publication in PRL, changes made in the tex

Computer-Aided Modeling and Analysis of Power Processing Systems (CAMAPPS), phase 1

The large-signal behaviors of a regulator depend largely on the type of power circuit topology and control. Thus, for maximum flexibility, it is best to develop models for each functional block a independent modules. A regulator can then be configured by collecting appropriate pre-defined modules for each functional block. In order to complete the component model generation for a comprehensive spacecraft power system, the following modules were developed: solar array switching unit and control; shunt regulators; and battery discharger. The capability of each module is demonstrated using a simplified Direct Energy Transfer (DET) system. Large-signal behaviors of solar array power systems were analyzed. Stability of the solar array system operating points with a nonlinear load is analyzed. The state-plane analysis illustrates trajectories of the system operating point under various conditions. Stability and transient responses of the system operating near the solar array's maximum power point are also analyzed. The solar array system mode of operation is described using the DET spacecraft power system. The DET system is simulated for various operating conditions. Transfer of the software program CAMAPPS (Computer Aided Modeling and Analysis of Power Processing Systems) to NASA/GSFC (Goddard Space Flight Center) was accomplished

Heavy quarkonium correlators at finite temperature: QCD sum rule approach

We investigate the properties of heavy quarkonia at finite temperature in detail using QCD sum rules. Extending previous analyses, we take into account a temperature dependent effective continuum threshold and derive constraints on the mass, the width, and the varying effective continuum threshold. We find that at least one of these quantities of a charmonium changes abruptly in the vicinity of the phase transition. We also calculate the ratio of the imaginary time correlator to its reconstructed one, $G/G_{\text{rec}}$, by constructing a model spectral function and compare it to the corresponding lattice QCD results. We demonstrate that the almost constant unity of $G/G_{\text{rec}}$ can be obtained from the destructive interplay of the changes in each part of the spectral modification which are extracted from QCD sum rules.Comment: Revised version to appear in PRD. 31 pages, 31 figures. Title is change

Quantifying mixed-state quantum entanglement by optimal entanglement witness

We develop an approach of quantifying entanglement in mixed quantum states by the optimal entanglement witness operator. We identify the convex set of mixed states for which a single witness provides the exact value of an entanglement measure, and show that the convexity, properties, and symmetries of entanglement or of a target state considerably fix the form of the optimal witness. This greatly reduces difficulty in computing and experimentally determining entanglement measures. As an example, we show how to experimentally quantify bound entanglement in four-qubit noisy Smolin states and three-qubit Greenberger-Horne-Zeilinger (GHZ) entanglement under white noise. For general measures and states, we provide a numerical method to efficiently optimize witness.Comment: Supplemental material is include

Simulation of Transport and Gain in Quantum Cascade Lasers

Quantum cascade lasers can be modeled within a hierarchy of different approaches: Standard rate equations for the electron densities in the levels, semiclassical Boltzmann equation for the microscopic distribution functions, and quantum kinetics including the coherent evolution between the states. Here we present a quantum transport approach based on nonequilibrium Green functions. This allows for quantitative simulations of the transport and optical gain of the device. The division of the current density in two terms shows that semiclassical transitions are likely to dominate the transport for the prototype device of Sirtori et al. but not for a recent THz-laser with only a few layers per period. The many particle effects are extremely dependent on the design of the heterostructure, and for the case considered here, inclusion of electron-electron interaction at the Hartree Fock level, provides a sizable change in absorption but imparts only a minor shift of the gain peak.Comment: 12 pages, 5 figures included, to appear in in "Advances in Solid State Physics", ed. by B. Kramer (Springer 2003

Self-Consistent Theory of the Gain Linewidth for Quantum Cascade Lasers

The linewidth in intersubband transitions can be significantly reduced below the sum of the lifetime broadening for the involved states, if the scattering environment is similar for both states. This is studied within a nonequilibrium Green function approach here. We find that the effect is of particular relevance for a recent, relatively low doped, THz quantum cascade laser.Comment: 3 pages, figures include

Dynamics of thermalisation in small Hubbard-model systems

We study numerically the thermalisation and temporal evolution of the reduced density matrix for a two-site subsystem of a fermionic Hubbard model prepared far from equilibrium at a definite energy. Even for very small systems near quantum degeneracy, the subsystem can reach a steady state resembling equilibrium. This occurs for a non-perturbative coupling between the subsystem and the rest of the lattice where relaxation to equilibrium is Gaussian in time, in sharp contrast to perturbative results. We find similar results for random couplings, suggesting such behaviour is generic for small systems.Comment: 4 pages, 5 figure