11 research outputs found
Method for orthorectification of terrestrial radar maps
International audienceThe vehicle-based PELICAN radar system is used in the context of mobile mapping. The R-SLAM algorithm allows simultaneous retrieval of the vehicle trajectory and of the map of the environment. As the purpose of PELICAN is to provide a means for gathering spatial information, the impact of distortion caused by the topography is not negligible. This article proposes an orthorectification process to correct panoramic radar images and the consequent R-SLAM trajectory and radar map. The a priori knowledge of the area topography is provided by a digital elevation model. By applying the method to the data obtained from a path with large variations in altitude it is shown that the corrected panoramic radar images are contracted by the orthorectification process. The efficiency of the orthorectification process is assessed firstly by comparing R-SLAM trajectories to a GPS trajectory and secondly by comparing the position of Ground Control Points on the radar map with their GPS position. The RMS positioning error moves from 5.56 m for the raw radar map to 0.75 m for the orthorectified radar map
Evaluation of LoRa technology in 433-MHz and 868-MHz for underground to aboveground data transmission
International audienc
Evolutionary Algorithm with Geometrical Heuristics for Solving the Close Enough Traveling Salesman Problem: Application to the Trajectory Planning of an Unmanned Aerial Vehicle
Evolutionary algorithms have been widely studied in the literature to find sub-optimal solutions to complex problems as the Traveling Salesman Problem (TSP). In such a problem, the target positions are usually static and punctually defined. The objective is to minimize a cost function as the minimal distance, time or energy. However, in some applications, as the one addressed in this paper—namely the data collection of buried sensor nodes by means of an Unmanned Aerial Vehicle— the targets are areas with varying sizes: they are defined with respect to the radio communication range of each node, ranging from a few meters to several hundred meters according to various parameters (e.g., soil moisture, burial depth, transmit power). The Unmanned Aerial Vehicle has to enter successively in these dynamic areas to collect the data, without the need to pass at the vertical of each node. Some areas can obviously intersect. That leads to solve the Close Enough TSP. To determine a sub-optimal trajectory for the Unmanned Aerial Vehicle, this paper presents an original and efficient strategy based on an evolutionary algorithm completed with geometrical heuristics. The performances of the algorithm are highlighted through scenarios with respectively 15 and 50 target locations. The results are analyzed with respect to the total route length. Finally, conclusions and future research directions are discussed
Adaptive Robot Control Based on Wireless Underground Sensor Network in Agriculture 4.0
International audienceFrom sensor nodes fully buried at a few dozens of centimeters deep in Wireless Underground Sensor Networks (WUSN), the soil moisture information can be measured anywhere, including in the passage of vehicles. This opens new opportunities, in particular in Agriculture 4.0, to adapt the speed and work of agricultural mobile robots to the ground conditions. By integrating a collector node in a robot, connected to its CAN bus, this paper experimentally demonstrates the possibility to adapt in real time the speed of the robot with respect to the soil moisture information transmitted in LoRa by a buried sensor node. The hardware and software developements are presented, and the first experimental results discussed. Future research directions are given to extend the capabilities of the system proposed. The innovative approach presented in thispaper enables to envision new possibilities in the combination of WUSN and robotics technologies
Data Collection from Buried Sensor Nodes by Means of an Unmanned Aerial Vehicle
International audienceThe development of Wireless Underground Sensor Networks (WUSNs) is a recent research axis based on sensor nodes buried a few dozen centimeters deep. The communication ranges are, however, highly reduced due to the high attenuation of electromagnetic waves in soil, leading to issues of data collection. This paper proposes to embed a data collector on an Unmanned Aerial Vehicle (UAV) coming close to each buried sensor node. The whole system was developed (sensor nodes, data collector, gateway) and experimentations were carried out in real conditions. In hovering mode, the measurements on the RSSI levels with respect to the position of the UAV highlight the interest in maintaining a high altitude when the UAV is far from the node. In dynamic mode, the experimental results demonstrate the feasibility of carrying out the data collection task while the UAV is moving. The speed of the UAV has, however, to be adapted to the required time to collect the data. In the case of numerous buried sensor nodes, evolutionary algorithms are implemented to plan the trajectory of the UAV optimally. To the best of our knowledge, this paper is the first one that reports experiment results combining WUSN and UAV technologies
Internet of Underground Things in Agriculture 4.0: Challenges, Applications and Perspectives
Internet of underground things (IoUTs) and wireless underground sensor networks (WUSNs) are new technologies particularly relevant in agriculture to measure and transmit environmental data, enabling us to optimize both crop growth and water resource management. The sensor nodes can be buried anywhere, including in the passage of vehicles, without interfering with aboveground farming activities. However, to obtain fully operational systems, several scientific and technological challenges remain to be addressed. The objective of this paper is to identify these challenges and provide an overview of the latest advances in IoUTs and WUSNs. The challenges related to the development of buried sensor nodes are first presented. The recent approaches proposed in the literature to autonomously and optimally collect the data of several buried sensor nodes, ranging from the use of ground relays, mobile robots and unmanned aerial vehicles, are next described. Finally, potential agricultural applications and future research directions are identified and discussed
Towards a UML Profile for Designing Smart IoT Data-Centric Applications
The implementation of IoT (Internet of Things) systems is difficult since the data sent from the devices is complex, especially in agriculture and agroecology, where it is generated from heterogeneous hardware and software, and its applications involve different actors. In this scenario, conceptual design is mandatory to provide a formal and unambiguous representation allowing the different actors to set their requirements.
The problem with the current representations is that they do not take into account neither the internal parameters nor the dynamic aspect of smart devices. To fill this gap we propose SmartSTS4IoT, an extension of the STS4IoT UML profile that models the different representations of internal/external data expressed from the same sensor and the logic used to adapt the sending/sensing policies to sudden environmental changes. The profile is illustrated with reference to a case study in the context of smart agriculture and validated theoretically
ConnecSenS, a Versatile IoT Platform for Environment Monitoring: Bring Water to Cloud
International audienceClimate change is having an increasingly rapid impact on ecosystems and particularly on the issue of water resources. The Internet of Things and communication technologies have now reached a level of maturity that allows sensors to be deployed more easily on sites to monitor them. The communicating node based on LoRaWAN technology presented in this article is open and allows the interfacing of numerous sensors for designing long-term environmental monitoring systems of isolated sites. The data integration in the cloud is ensured by a workflow driving the storage and indexing of data, allowing a simple and efficient use of the data for different users (scientists, administration, citizens) through specific dashboards and extractions. This article presents this infrastructure through environmental monitoring use cases related to water resources
Interoperabilité et raisonnement dans le Web Sémantique des objets: le projet CoSWoT
National audienceCet article présente le contexte et les objectifs du projet ANR nommé Constrained Semantic Webof Things (CoSWoT). CoSWoT a pour objectif de proposer une architecture logicielle distribuée compatibleWoT et embarquée sur des dispositifs contraints. Cette architecture a deux caractéristiques principales :(1) elle utilisera des modèles de connaissances à base de graphes pour déclarer la logique applicative desdispositifs et la sémantique des messages échangés ; (2) les dispositifs auront des capacités de raisonnementafin de répartir les tâches de traitement entre eux. Le développement d’applications WoT sera simplifié :notre plateforme permettra le développement et l’exécution d’applications intelligentes et décentralisées duWoT malgré l’hétérogénéité des dispositifs connectés. La plateforme proposée sera testée sur plusieurs casd’utilisation dans le bâtiment intelligent et en agriculture numérique