250 research outputs found

    Monitoring odour emisssions from an oil & gas plant: Electronic nose performance testing in the field

    Get PDF
    This paper focuses on performance testing of electronic noses for environmental odour monitoring in terms of their capability of correctly classifying odours at low odour concentrations. The studied case concerns the realization of an electronic nose network for the continuous monitoring of odour emissions from a crude oil extraction and separation plant. The novelty of the work consists in the fact that performance testing, which is typically carried out in laboratory before installation in the field for environmental odour monitoring outside the plant boundaries, in this case was carried out after installation with the aim of testing the instruments performances in the effective working conditions. This involved the necessity to develop a specific and repeatable procedure to obtain samples at known quality and concentration in the field. Electronic nose performance was evaluated in terms of classification accuracy, which produced satisfactory results towards the considered olfactory classes

    Non-carcinogenic occupational exposure risk related to foundry emissions: focus on the workers involved in olfactometric assessments.

    Get PDF
    The scope of this work is the evaluation of the non-carcinogenic occupational risk related to foundry emissions, focusing on the category of workers involved in olfactometric assessments. Odor pollution from industrial activities such as foundries is a serious environmental concern. Sensorial techniques (e.g. dynamic olfactometry, EN13725:2003) currently represent the preferred method for odor emission characterization. During olfactometric analyses, human assessors are directly exposed to the odor at increasing concentrations, thus requiring the assessment of the associated exposure risk to guarantee workers' safety. This paper presents an investigation aiming to produce an inventory of compounds emitted from foundries together with their odor thresholds and toxicological limits (TLVs), with the final objective to propose a procedure for ensuring workers' safety during olfactometric analyses. Looking at the database resulting from this study, among the >100 compounds emitted by foundries, 8 have a maximum concentration above their TLV. Among those, ammonia, H2S, phenol, toluene and trimethylamine, produce an odor stimulus before they reach a toxic concentration, thus not representing a risk for olfactometric workers. Benzene, formaldehyde and SO2 are identified as the most critical compounds because they may reach toxic concentrations in foundry emissions, and they start being perceived by humans above their TLV. The proposed procedure entails a minimum dilution factor of 27'000 to be applied to odor samples analyzed by olfactometry, which however might result inapplicable in practical cases, thus pointing out the necessity to adopt chemical measurements to investigate specifically the concentration of the most critical compounds identified in this study

    Evaluation of olfactory properties of gas odorants

    Get PDF

    Electronic noses for environmental monitoring applications

    Get PDF
    Electronic nose applications in environmental monitoring are nowadays of great interest, because of the instruments’ proven capability of recognizing and discriminating between a variety of different gases and odors using just a small number of sensors. Such applications in the environmental field include analysis of parameters relating to environmental quality, process control, and verification of efficiency of odor control systems. This article reviews the findings of recent scientific studies in this field, with particular focus on the abovementioned applications. In general, these studies prove that electronic noses are mostly suitable for the different applications reported, especially if the instruments are specifically developed and fine-tuned. As a general rule, literature studies also discuss the critical aspects connected with the different possible uses, as well as research regarding the development of effective solutions. However, currently the main limit to the diffusion of electronic noses as environmental monitoring tools is their complexity and the lack of specific regulation for their standardization, as their use entails a large number of degrees of freedom, regarding for instance the training and the data processing procedures

    Measuring odours in the environment vs. dispersion modelling: A review

    Get PDF
    Source characterization alone is not sufficient to account for the effective impact of odours on citizens, which would require to quantify odours directly at receptors. However, despite a certain simplicity of odour measurement at the emission source, odour measurement in the field is a quite more complicated task. This is one of the main reasons for the spreading of odour impact assessment approaches based on odour dispersion modelling. Currently, just a very limited number of reports discussing the use of tracer gas dispersion experiments both in the field and in wind tunnels for model validation purposes can be found in literature. However, when dealing with odour emissions, it is not always possible to identify a limited number of tracer compounds, nor to relate analytical concentrations to odour properties, thus giving that considering single odorous compounds might be insufficient to account for effective odour perception. For these reasons, the possibility of measuring of odours in the field, both as a way for directly assessing odour annoyance or for verifying that modelled odour concentrations correspond to the effective odour perception by humans, is still an important objective. The present work has the aim to review the techniques that can be adopted for measuring odours in the field, particularly discussing how such techniques can be used in alternative or in combination with odour dispersion models for odour impact assessment purposes, and how the results of field odour measurements and model outputs can be related and compared to each other

    H 2

    Get PDF
    Hydrogen-sulfide (H2S) is a molecule of small dimensions typically present in the odor emissions from different plants. The European Standard EN 13725:2003 set a maximum storage time allowed of 30 hours, during which the sampling bag has to maintain the mixture of odorants with minimal changes. This study investigates the H2S losses through Nalophan bags and it shows that nonnegligible losses of H2S can be observed. The percent H2S loss after 30 hrs with respect to the initial concentration is equal to 33%  ± 3% at a relative humidity of 20% and equal to 22%  ± 1% at a relative humidity of 60%. The average quantity of adsorbed H2S at 30 h is equal to 2.17 105 gH2S/gNalophan at a storage humidity of 20% and equal to 1.79 105 gH2S/gNalophan at a storage humidity of 60%. The diffusion coefficients of H2S through Nalophan, for these two humidity conditions tested, are comparable (i.e., 7.5 10−12 m2/sec at 20% humidity and 6.6 10−12 m2/sec at 60% humidity)
    • …
    corecore