The Effect of Poly (Glycerol Sebacate) Incorporation within Hybrid Chitin–Lignin Sol–Gel Nanofibrous Scaffolds

Chitin and lignin primarily accumulate as bio-waste resulting from byproducts of crustacean crusts and plant biomass. Recently, their use has been proposed for diverse and unique bioengineering applications, amongst others. However, their weak mechanical properties need to be improved in order to facilitate their industrial utilization. In this paper, we fabricated hybrid fibers composed of a chitin–lignin (CL)-based sol–gel mixture and elastomeric poly (glycerol sebacate) (PGS) using a standard electrospinning approach. Obtained results showed that PGS could be coherently blended with the sol–gel mixture to form a nanofibrous scaffold exhibiting remarkable mechanical performance and improved antibacterial and antifungal activity. The developed hybrid fibers showed promising potential in advanced biomedical applications such as wound care products. Ultimately, recycling these sustainable biopolymers and other bio-wastes alike could propel a “greener” economy

Diversification of Vascular Occlusions and Crystal Deposits in the Xylem Sap Flow of Five Tunisian Grapevines

Xylem vessels are essential pivotal organs in bulk hydraulic flow through the whole woody plant. However, environmental constraints generate disagreements in xylem structures, which are characterized by air emboli and occlusions formations, compromising water conductivity in grapevines. The aim of this work was to explore xylem morphology dynamics through the xylem sap flow of five Tunisian grapevine cultivars during the natural bleeding sap periods of 2019, 2021, and 2022. In fact, Sakasly, Khamri, Hencha, Razegui1, and Razegui2 rain-fed grapevine cultivars revealed differential responses towards xylem sap movement. The results demonstrated that the xylem sap flow was significantly more abundant in 2019 than 2021 and 2022 bleeding sap campaigns. A variation was revealed between the cultivars regarding the xylem sap flow. In fact, Sakasly gave the best xylem flow during the three campaigns. Razegui1 and Razegui2 registered approximately similar xylem sap flow, while Hencha and Khamri present the lowest sap fluxes during the three campaigns. Moreover, several vascular occlusions forms were identified from stem cross sections using environmental scanning electron microscopy (ESEM), including tyloses, gels, starch, and gum deposits. The highest occlusion number was observed in Sakasly, Razegui1, and Razegui2 cultivars. Among different biogenic calcium shapes, several were observed for the first time in grapevine, including multi-faceted druse, cubic, crystalline sand, styloids, spherical, or drop-like structures. Considering their lower flow and totally blocked vessels, both Hencha and Khamri confirmed their susceptibility to environmental constraints. However, Sakasly, Razegui1, and Razegui2 cultivars presented higher tolerance according to their sap flow and xylem morphology

Electrospun Poly (Vinylidene Fluoride-Co-Hexafluoropropylene) Nanofiber Membranes for Brine Treatment via Membrane Distillation

The major challenge for membrane distillation (MD) is the membrane wetting resistance induced by pollutants in the feed solution. The proposed solution for this issue was to fabricate membranes with hydrophobic properties. Hydrophobic electrospun poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) nanofiber membranes were produced for brine treatment using the direct-contact membrane distillation (DCMD) technique. These nanofiber membranes were prepared from three different polymeric solution compositions to study the effect of solvent composition on the electrospinning process. Furthermore, the effect of the polymer concentration was investigated by preparing polymeric solutions with three different polymer percentages: 6, 8, and 10%. All of the nanofiber membranes obtained from electrospinning were post-treated at varying temperatures. The effects of thickness, porosity, pore size, and liquid entry pressure (LEP) were studied. The hydrophobicity was determined using contact angle measurements, which were investigated using optical contact angle goniometry. The crystallinity and thermal properties were studied using DSC and XRD, while the functional groups were studied using FTIR. The morphological study was performed with AMF and described the roughness of nanofiber membranes. Finally, all of the nanofiber membranes had enough of a hydrophobic nature to be used in DCMD. A PVDF membrane filter disc and all nanofiber membranes were applied in DCMD to treat brine water. The resulting water flux and permeate water quality were compared, and it was discovered that all of the produced nanofiber membranes showed good behavior with varying water flux, but the salt rejection was greater than 90%. A membrane prepared from DMF/acetone 5-5 with 10% PVDF-HFP provided the perfect performance, with an average water flux of 44 kg.m−2.h−1 and salt rejection of 99.8%

Progress of Nanocomposite Membranes for Water Treatment

The use of membrane-based technologies has been applied for water treatment applications; however, the limitations of conventional polymeric membranes have led to the addition of inorganic fillers to enhance their performance. In recent years, nanocomposite membranes have greatly attracted the attention of scientists for water treatment applications such as wastewater treatment, water purification, removal of microorganisms, chemical compounds, heavy metals, etc. The incorporation of different nanofillers, such as carbon nanotubes, zinc oxide, graphene oxide, silver and copper nanoparticles, titanium dioxide, 2D materials, and some other novel nano-scale materials into polymeric membranes have provided great advances, e.g., enhancing on hydrophilicity, suppressing the accumulation of pollutants and foulants, enhancing rejection efficiencies and improving mechanical properties and thermal stabilities. Thereby, the aim of this work is to provide up-to-date information related to those novel nanocomposite membranes and their contribution for water treatment applications

Heat transmission and air flow friction in a solar air heater with a ribbed absorber plate: A computational study

The influence of geometrical parameters of V-symmetry ribs on heat flow and fluid flow characteristics of solar air heater (SAH) rectangular duct with ribbed absorber is investigated theoretically. Fabrication of ribs in repeated artificial protrusions pattern on the absorber surface appears as a simple approach for increasing the solar collectors radiation harnessing capacity. The various characteristics of artificial roughness protrusions include relative roughness height (e/Dh), relative roughness pitch (p/e), and angle of attack of flow (α), and the span of these parameters is determined based on experimental considerations of the device and working circumstances. To measure the improvement in the coefficient of heat transfer and friction factor, the outcomes were correlated to those of a smooth conduit under identical flow characteristics. The greatest increase in Stanton number and friction factor is 1.13 and 1.19 folds that of the smooth SAH duct, correspondingly

Assessment of Blend PVDF Membranes, and the Effect of Polymer Concentration and Blend Composition

In this work, PVDF homopolymer was blended with PVDF-co-HFP copolymer and studied in terms of morphology, porosity, pore size, hydrophobicity, permeability, and mechanical properties. Different solvents, namely N-Methyl-2 pyrrolidone (NMP), Tetrahydrofuran (THF), and Dimethylformamide (DMF) solvents, were used to fabricate blended PVDF flat sheet membranes without the introduction of any pore forming agent, through a non-solvent induced phase separation (NIPS) technique. Furthermore, the performance of the fabricated membranes was investigated for pressure and thermal driven applications. The porosity of the membranes was slightly increased with the increase in the overall content of PVDF and by the inclusion of PVDF copolymer. Total PVDF content, copolymer content, and mixed-solvent have a positive effect on mechanical properties. The addition of copolymer increased the hydrophobicity when the total PVDF content was 20%. At 25% and with the inclusion of mixed-solvent, the hydrophobicity was adversely affected. The permeability of the membranes increased with the increase in the overall content of PVDF. Mixed-solvents significantly improved permeability