Solar-Powered Rankine Cycle Assisted by an Innovative Calcium Looping Process as an Energy Storage System

Solar energy is an intermittent resource, and thus an energy storage system is required for practical applications of the collected solar irradiance. This work deals with the integration of a thermo-chemical energy storage (TCES) system based on the calcium looping (CaL) process with a concentrated solar tower power (CSP) plant. The objective of this work is the integration of a conventional 320 MWe Rankine cycle with a direct calcination for energy harvesting. Particularly, this work addresses the use of CO2 as the working fluid of a compressed-gas energy storage (CGES) system for hybrid energy storage with the CaL process. The hybrid TC/CG-ES (thermo-chemical/compressed-gas energy storage) system can increase the competitiveness of the CSP with respect to conventional fossil-based power plants leading to a reduction in CO2 emissions. The thermal integration with the calcium looping (CaL) system is optimized by means of the pinch analysis methodology. The obtained results show a reduction in the electrical efficiency of about four percentage points with respect to the conventional Rankine power cycle without the CSP unit: the net electrical efficiency reduces from 43.7% to 39.5% while the global (thermal and electrical) efficiency of the plant reaches the peak value of 51.5% when low enthalpy energy is recovered (e.g., district heating network, district cooling network). This paper highlights the importance of the thermochemical CaO based material. With a conversion of CaO to CaCO3 of 80% the storage efficiency is defined as the ratio of the energy released during the carbonation and the CO2 expansion to the energy collected by the solar field and required during the CO2 compression, which is 87.3%

A Review on CO2 Capture Technologies with Focus on CO2-Enhanced Methane Recovery from Hydrates

Natural gas is considered a helpful transition fuel in order to reduce the greenhouse gas emissions of other conventional power plants burning coal or liquid fossil fuels. Natural Gas Hydrates (NGHs) constitute the largest reservoir of natural gas in the world. Methane contained within the crystalline structure can be replaced by carbon dioxide to enhance gas recovery from hydrates. This technical review presents a techno-economic analysis of the full pathway, which begins with the capture of CO2 from power and process industries and ends with its transportation to a geological sequestration site consisting of clathrate hydrates. Since extracted methane is still rich in CO2, on-site separation is required. Focus is thus placed on membrane-based gas separation technologies widely used for gas purification and CO2 removal from raw natural gas and exhaust gas. Nevertheless, the other carbon capture processes (i.e., oxy-fuel combustion, pre-combustion and post-combustion) are briefly discussed and their carbon capture costs are compared with membrane separation technology. Since a large-scale Carbon Capture and Storage (CCS) facility requires CO2 transportation and storage infrastructure, a technical, cost and safety assessment of CO2 transportation over long distances is carried out. Finally, this paper provides an overview of the storage solutions developed around the world, principally studying the geological NGH formation for CO2 sinks

Digital Platforms for Renewable Energy Communities Projects: An Overview

The European Union energy policy agenda of achieving the transition to carbon neutrality has been established by an important legislative package called "Clean Energy for all Europeans". A novel approach introduced was to put the citizen at the center of the energy transition. On one side, by powering his freedom of action and, on the other side, by asking him an exceptional engagement in energy consumption reduction activities and in participating in the investments for new distributed Renewable Energy Sources (RES) power plants. The Renewable Energy Communities (REC) is the policy framework used to implement this strategy introduced by the Renewable Energy Directive Recast (RED II). In particular, RECs promote citizen’s active role by encouraging energy consumption reduction and energy demand flexibility while reducing the Not In My Bachyard (NIMBY) effect towards RES. Each member state is transposing the RED II directive, adapting it to national legislation and energy transition strategy. Pioneers countries like Italy have already started the experimentation of this framework and developing the first pilot projects. The citizens’ interest and their will to participate in REC projects indicate the need for supporting tools guiding them along all the project development stages: “design”, “creation”, and “operation”. This work presents three categories of supporting digital tools and platforms required to develop REC projects: Commercial, EU Founded and Freeware. We analyzed 30 tools, evaluating the services provided in each of the different stages of REC project implementation

Green synthetic fuels: Renewable routes for the conversion of non-fossil feedstocks into gaseous fuels and their end uses

Innovative renewable routes are potentially able to sustain the transition to a decarbonized energy economy. Green synthetic fuels, including hydrogen and natural gas, are considered viable alternatives to fossil fuels. Indeed, they play a fundamental role in those sectors that are di cult to electrify (e.g., road mobility or high-heat industrial processes), are capable of mitigating problems related to flexibility and instantaneous balance of the electric grid, are suitable for large-size and long-term storage and can be transported through the gas network. This article is an overview of the overall supply chain, including production, transport, storage and end uses. Available fuel conversion technologies use renewable energy for the catalytic conversion of non-fossil feedstocks into hydrogen and syngas. We will show how relevant technologies involve thermochemical, electrochemical and photochemical processes. The syngas quality can be improved by catalytic CO and CO2 methanation reactions for the generation of synthetic natural gas. Finally, the produced gaseous fuels could follow several pathways for transport and lead to different final uses. Therefore, storage alternatives and gas interchangeability requirements for the safe injection of green fuels in the natural gas network and fuel cells are outlined. Nevertheless, the effects of gas quality on combustion emissions and safety are considered

L’attuale sviluppo dell’EMAS e le prospettive per la nuova revisione

(In Inglese) In sight of the incoming revision process relating to the two most important voluntary instruments of the European Commission, the Ever study has been carried out on behalf of DG Environment, by a consortium of consultants led by Iefe Università Bocconi. The other partners in the consortium were Adelphi Consult, IOEW Office Heidelberg, SPRU Sussex University and Valør & Tinge A/S. The fundamental aim of the Ever study has been to provide recommendations for the revision of these voluntary schemes: Emas and the EU Eco-label. In particolar, the Ever study aimed, on one hand, at delivering a critical appraisal of both the Emas and the Eco-label scheme: the study analysed the relevance (take up and use), the effectiveness (impact on production and consumption patterns) and the efficiency (including cost efficiency) of the two schemes. Furthermore, it identified the drivers and barriers of both voluntary instruments, and investigate their utility (appropriateness as policy instruments) and their viability. On the other hand, the study aimed at providing recommendations by detailing options for improvement: these options shall regard the instruments themselves, linkages between them and linkages to other related initiatives and policies. The options and recommendations proposed for the schemes are based on the evidence collected in the different phases of the Ever study: the ‘desk research’, consisting of a thorough review of existing literature and previous studies and surveys on the schemes, and the ‘in-field’ research, carried out by way of direct interviews and case studies, provided the background relating to their strengths and weaknesses. This article aims at describing the results of the Ever study, with specific reference to Emas

Techno-economic comparison of buildings acting as Single-Self Consumers or as energy community through multiple economic scenarios

The European Union has set ambitious targets to move towards a society with high penetration of renewable energy sources. In the forthcoming energy transition, Energy Communities (EC), i.e., legal entities where different actors, including citizens, cooperate in energy generation, storage and management, will play a crucial role. The present work simulates the energy flows and assesses the potential economic benefits of a cluster of buildings acting collectively as an energy community – a specific case study is set in northern Italy by comparing the EC performance with a configuration where customers act as Single Self-Consumers (SSCs). Pending the transposition of EU Directives to binding national laws, due by 2021, different supporting tariffs (economic scenarios) have been simulated in order to determine which scheme will support more effectively the integration of Energy Communities in the national energy market. Results show that ECs (i.e., customers acting collectively as energy prosumers) are able to accelerate the diffusion of building-integrated renewable energy sources (RES), resulting in higher overall self-consumption rates than SSCs. Self-consumed electricity generates savings on the energy bill of EC, and we calculated positive economic performance indicators for all the analysed economic scenarios. The sensitivity analysis carried out on system and transport charges of the electricity bill shows their remarkable impact on the economics making the EC less attractive for investors and citizens without proper supporting schemes

The energy center initiative at politecnico di torino: practical experiences on energy efficiency measures in the municipality of torino

Urban districts should evolve towards a more sustainable infrastructure and greener energy carriers. The utmost challenge is the smart integration and control, within the existing infrastructure, of new information and energy technologies (such as sensors, appliances, electric and thermal power and storage devices) that are able to provide multi-services based on multi-actors and multi and interchangeable energy carriers. In recent years, the Municipality of Torino represents an experimental scenario, in which practical experiences in the below-areas have taken place through a number of projects: 1. energy efficiency in building; 2. smart energy grids management and smart metering; 3. biowaste-to-energy: mixed urban/industrial waste management with enhanced energy recovery from biogas. This work provides an overview and update on the most interesting initiatives of smart energy management in the urban context of Torino, with an analysis and quantification of the advantages gained in terms of energy and environmental efficiency