509 research outputs found
The Rainbow Scale for the Assessment of the Cervicomental Angle:A Validated Scale
Background: Aging of the neck results in an increased cervicomental angle, which can be treated by various surgical and nonsurgical procedures. To measure the success of these procedures, standardized validated objective photographic measurement tools are needed. However, no online standardized photographic measurement tools exist for the assessment of the cervicomental angle. Objectives: The purpose of this study was to establish a validated and reliable measurement tool for the assessment of the cervicomental angle based on the Rainbow Scale. Methods: A 5-point photographic rating scale was developed and created from 1 photograph with Adobe Photoshop. Fifteen reference photographs of women, 3 photographs per grade, were included for validation. Seven panelists (ie, plastic and maxillofacial surgeons) assessed the reference photographs 3 times with a minimal interval of 3 days in an online survey. Intra- and inter-observer agreements were calculated utilizing the weighted kappa coefficient. Results: Mean intra-observer agreement was 0.93 (0.78-1.00). Mean interobserver agreement was 0.796 (0.574-0.961) for survey 1, 0.868 (0.690-0.960) for survey 2, and 0.820 (0.676-0.959) for survey 3. Conclusions: The Rainbow Scale for the assessment of the cervicomental angle has been validated in an online fashion. The scale is reproducible and reliable and requires no learning curve. Potential applications include objective assessment of neck treatment planning and surgical outcome
Single-Cell STAT5 Signal Transduction Profiling in Normal and Leukemic Stem and Progenitor Cell Populations Reveals Highly Distinct Cytokine Responses
BACKGROUND: Signal Transducer and Activator of Transcription 5 (STAT5) plays critical roles in normal and leukemic hematopoiesis. However, the manner in which STAT5 responds to early-acting and lineage-restricted cytokines, particularly in leukemic stem/progenitor cells, is largely unknown. METHODOLOGY/PRINCIPAL FINDINGS: We optimized a multiparametric flow cytometry protocol to analyze STAT5 phosphorylation upon cytokine stimulation in stem and progenitor cell compartments at a single-cell level. In normal cord blood (CB) cells, STAT5 phosphorylation was efficiently induced by TPO, IL-3 and GM-CSF within CD34(+)CD38(-) hematopoietic stem cells (HSCs). EPO- and SCF-induced STAT5 phosphorylation was largely restricted to the megakaryocyte-erythroid progenitor (MEP) compartment, while G-CSF as well IL-3 and GM-CSF were most efficient in inducing STAT5 phosphorylation in the myeloid progenitor compartments. Strikingly, mobilized adult peripheral blood (PB) CD34(+) cells responded much less efficiently to cytokine-induced STAT5 activation, with the exception of TPO. In leukemic stem and progenitor cells, highly distinct cytokine responses were observed, differing significantly from their normal counterparts. These responses could not be predicted by the expression level of cytokine receptors. Also, heterogeneity existed in cytokine requirements for long-term expansion of AML CD34(+) cells on stroma. CONCLUSIONS/SIGNIFICANCE: In conclusion, our optimized multiparametric flow cytometry protocols allow the analysis of signal transduction at the single cell level in normal and leukemic stem and progenitor cells. Our study demonstrates highly distinctive cytokine responses in STAT5 phosphorylation in both normal and leukemic stem/progenitor cells
Maxillary Changes Following Facial Bipartition β A Three-Dimensional Quantification
INTRODUCTION: Children with Apert syndrome have hypertelorism and midfacial hypoplasia, which can be treated with facial bipartition (FB), often aided by rigid external distraction. The technique involves a midline osteotomy that lateralizes the maxillary segments, resulting in posterior cross-bites and midline diastema. Varying degrees of spontaneous realignment of the dental arches occurs postoperatively. This study aims to quantify these movements and assess whether they occur as part of a wider skeletal relapse or as dental compensation. METHODS: Patients who underwent FB and had high quality computed tomography scans at the preoperative stage, immediately postsurgery, and later postoperatively were reviewed. DICOM files were converted to three-dimensional bone meshes and anatomical point-to-point displacements were quantified using nonrigid iterative closest point registration. Displacements were visualized using arrow maps, thereby providing an overview of the movements of the facial skeleton and dentition. RESULTS: Five patients with Apert syndrome were included. In all cases, the arrow maps demonstrated initial significant anterior movement of the frontofacial segment coupled with medial rotation of the orbits and transverse divergence of the maxillary arches. The bony position following initial surgery was shown to be largely stable, with primary dentoalveolar relapse correcting the dental alignment. CONCLUSIONS: This study showed that spontaneous dental compensation occurs following FB without compromising the surgical result. It may be appropriate to delay active orthodontic for 6-months postoperatively until completion of this early compensatory phase
Local Soft Tissue and Bone Displacements Following Midfacial Bipartition Distraction in Apert Syndrome β Quantification Using a Semi-Automated Method
ABSTRACT: Patients with Apert syndrome experience midfacial hypoplasia, hypertelorism, and downslanting palpebral fissures which can be corrected by midfacial bipartition distraction with rigid external distraction device. Quantitative studies typically focus on quantifying rigid advancement and rotation postdistraction, but intrinsic shape changes of bone and soft tissue remain unknown. This study presents a method to quantify these changes. Pre- and post-operative computed tomography scans from patients with Apert syndrome undergoing midfacial bipartition distraction with rigid external distraction device were collected. Digital Imaging and Communications in Medicine files were converted to three-dimensional bone and soft tissue reconstructions. Postoperative reconstructions were aligned on the preoperative maxilla, followed by nonrigid iterative closest point transformation to determine local shape changes. Anatomical point-to-point displacements were calculated and visualized using a heatmap and arrow map. Nine patients were included.Zygomatic arches and frontal bone demonstrated the largest changes. Mid-lateral to supra-orbital rim showed an upward, inward motion. Mean bone displacements ranged from 3.3 to 12.8 mm. Soft tissue displacements were relatively smaller, with greatest changes at the lateral canthi. Midfacial bipartition distraction with rigid external distraction device results in upward, inward rotation of the orbits, upward rotation of the zygomatic arch, and relative posterior motion of the frontal bone. Local movements were successfully quantified using a novel method, which can be applied to other surgical techniques/syndromes
Growth Patterns and Shape Development of the Paediatric Mandible – a 3d Statistical Model
Background/Aim:To develop a 3D morphable model of the normal paediatric mandible to analyse shape development and growth patterns for males and females.Methods:Computed tomography (CT) data was collected for 242 healthy children referred for CT scan between 2011 and 2018 aged between 0 and 47 months (mean, 20.6 ± 13.4 months, 59.9% male). Thresholding techniques were used to segment the mandible from the CT scans. All mandible meshes were annotated using a defined set of 52 landmarks and processed such that all meshes followed a consistent triangulation. Following this, the mandible meshes were rigidly aligned to remove translation and rotation effects, whilst size effects were retained. Principal component analysis (PCA) was applied to the processed meshes to construct a generative 3D morphable model. Partial least squares (PLS) regression was also applied to the processed data to extract the shape modes with which to evaluate shape differences for age and gender. Growth curves were constructed for anthropometric measurements.Results:A 3D morphable model of the paediatric mandible was constructed and validated with good generalisation, compactness, and specificity. Growth curves of the assessed anthropometric measurements were plotted without significant differences between male and female subjects. The first principal component was dominated by size effects and is highly correlated with age at time of scan (Pearson’s r = 0.92, p < 0.01). As with PCA, the first extracted PLS mode captures much of the size variation within the dataset and is highly correlated with age (Pearson’s r = -0.9, p <0.01). Little correlation was observed between extracted shape modes and gender with either PCA or PLS for this study population.Conclusion:The presented 3D morphable model of the paediatric mandible enables an understanding of mandibular shape development and variation by age and gender. It allowed for the construction of growth curves, which contains valuable information that can be used to enhance our understanding of various disorders that affect the mandibular development. Knowledge of shape changes in the growing mandible has potential to improve diagnostic accuracy for craniofacial conditions that impact the mandibular morphology, objective evaluation, surgical planning, and patient follow-up
Growth Patterns and Shape Development of the Paediatric Mandible – a 3d Statistical Model
Background/Aim:To develop a 3D morphable model of the normal paediatric mandible to analyse shape development and growth patterns for males and females.Methods:Computed tomography (CT) data was collected for 242 healthy children referred for CT scan between 2011 and 2018 aged between 0 and 47 months (mean, 20.6 ± 13.4 months, 59.9% male). Thresholding techniques were used to segment the mandible from the CT scans. All mandible meshes were annotated using a defined set of 52 landmarks and processed such that all meshes followed a consistent triangulation. Following this, the mandible meshes were rigidly aligned to remove translation and rotation effects, whilst size effects were retained. Principal component analysis (PCA) was applied to the processed meshes to construct a generative 3D morphable model. Partial least squares (PLS) regression was also applied to the processed data to extract the shape modes with which to evaluate shape differences for age and gender. Growth curves were constructed for anthropometric measurements.Results:A 3D morphable model of the paediatric mandible was constructed and validated with good generalisation, compactness, and specificity. Growth curves of the assessed anthropometric measurements were plotted without significant differences between male and female subjects. The first principal component was dominated by size effects and is highly correlated with age at time of scan (Pearson’s r = 0.92, p < 0.01). As with PCA, the first extracted PLS mode captures much of the size variation within the dataset and is highly correlated with age (Pearson’s r = -0.9, p <0.01). Little correlation was observed between extracted shape modes and gender with either PCA or PLS for this study population.Conclusion:The presented 3D morphable model of the paediatric mandible enables an understanding of mandibular shape development and variation by age and gender. It allowed for the construction of growth curves, which contains valuable information that can be used to enhance our understanding of various disorders that affect the mandibular development. Knowledge of shape changes in the growing mandible has potential to improve diagnostic accuracy for craniofacial conditions that impact the mandibular morphology, objective evaluation, surgical planning, and patient follow-up
Toetsing van grondonderzoek naar fosfaattoestand op Nederlands grasland : verslag van een in interprovinciaal verband verricht onderzoek
Growth patterns and shape development of the paediatric mandible β A 3D statistical model
BACKGROUND/AIM: To develop a 3D morphable model of the normal paediatric mandible to analyse shape development and growth patterns for males and females. METHODS: Computed tomography (CT) data was collected for 242 healthy children referred for CT scan between 2011 and 2018 aged between 0 and 47Β months (mean, 20.6Β Β±Β 13.4Β months, 59.9% male). Thresholding techniques were used to segment the mandible from the CT scans. All mandible meshes were annotated using a defined set of 52 landmarks and processed such that all meshes followed a consistent triangulation. Following this, the mandible meshes were rigidly aligned to remove translation and rotation effects, while size effects were retained. Principal component analysis (PCA) was applied to the processed meshes to construct a generative 3D morphable model. Partial least squares (PLS) regression was also applied to the processed data to extract the shape modes with which to evaluate shape differences for age and sex. Growth curves were constructed for anthropometric measurements. RESULTS: A 3D morphable model of the paediatric mandible was constructed and validated with good generalisation, compactness, and specificity. Growth curves of the assessed anthropometric measurements were plotted without significant differences between male and female subjects. The first principal component was dominated by size effects and is highly correlated with age at time of scan (Spearman's rΒ =Β 0.94, pΒ <Β 0.01). As with PCA, the first extracted PLS mode captures much of the size variation within the dataset and is highly correlated with age (Spearman's rΒ =Β β0.94, pΒ <Β 0.01). Little correlation was observed between extracted shape modes and sex with either PCA or PLS for this study population. CONCLUSION: The presented 3D morphable model of the paediatric mandible enables an understanding of mandibular shape development and variation by age and sex. It allowed for the construction of growth curves, which contains valuable information that can be used to enhance our understanding of various disorders that affect the mandibular development. Knowledge of shape changes in the growing mandible has potential to improve diagnostic accuracy for craniofacial conditions that impact the mandibular morphology, objective evaluation, surgical planning, and patient follow-up
Long-Term Performance of Epicardial versus Transvenous Left Ventricular Leads for Cardiac Resynchronization Therapy
Aims: to study the technical performance of epicardial left ventricular (LV) leads placed via video assisted thoracic surgery (VATS), compared to transvenously placed leads for cardiac resynchronization therapy (CRT).Methods: From 2001 until 2013, a total of 644 lead placement procedures were performed for CRT. In the case of unsuccessful transvenous LV lead placement, the patient received an epicardial LV lead. Study groups consist of 578 patients with a transvenous LV lead and 66 with an epicardial LV lead. The primary endpoint was LV-lead failure necessitating a replacement or deactivation. The secondary endpoint was energy consumption.Results: The mean follow up was 5.9 years (epicardial: 5.5 Β± 3.1, transvenous: 5.9 Β± 3.5). Transvenous leads failed significantly more frequently than epicardial leads with a total of 66 (11%) in the transvenous leads group vs. 2 (3%) in the epicardial lead group ( p = 0.037). Lead energy consumption was not significantly different between groups.Conclusions: Epicardial lead placement is feasible, safe and shows excellent long-term performance compared to transvenous leads. Epicardial lead placement should be considered when primary transvenous lead placement fails or as a primary lead placement strategy in challenging cases. </p
Treating Insomnia with High Risk of Depression Using Therapist-Guided Digital Cognitive, Behavioral, and Circadian Rhythm Support Interventions to Prevent Worsening of Depressive Symptoms: A Randomized Controlled Trial
- β¦