62 research outputs found
A prospective randomized study of ACL-reconstructions using bone-patellar tendon-bone grafts fixed with bioabsorbable or metal interference screws
Numerical Model‐Software for Predicting Rock Formation Failure‐Time Using Fracture Mechanics
Real‐time integrated drilling is an important practice for the upstream petroleum industry. Traditional
pre‐drill models, tend to offset the data gathered from the field since information obtained prior to
spudding and drilling of new wells often become obsolete due to the changes in geology and geomechanics
of reservoir‐rocks or formations. Estimating the complicated non‐linear failure‐time of a rock
formation is a difficult but important task that helps to mitigate the effects of rock failure when drilling
and producing wells from the subsurface. In this study, parameters that have the strongest impact on
rock failure were used to develop a numerical and computational model for evaluating wellbore
instability in terms of collapse, fracture, rock strength and failure‐time. This approach presents drilling
and well engineers with a better understanding of the fracture mechanics and rock strength failureprediction
procedure required to reduce stability problems by forecasting the rock/formation failuretime.
The computational technique built into the software, uses the stress distribution around a rock
formation as well as the rock’s responses to induced stress as a means of analyzing the failure time of
the rock. The results from simulation show that the applied stress has the most significant influence on
the failure‐time of the rock. The software also shows that the failure‐time varied over several orders of
magnitude for varying stress‐loads. Thus, this will help drilling engineers avoid wellbore failure by
adjusting the stress concentration properly through altering the mud pressure and well orientation with
respect to in‐situ stresses. As observed from the simulation results for the failure time analysis, the
trend shows that the time dependent strength failure is not just a function of the applied stress.
Because, at applied stress of 6000–6050 psi there was time dependent failure whereas, at higher
applied stress of 6350–6400 psi there was no time dependent strength failure
Biomechanics and anterior cruciate ligament reconstruction
For years, bioengineers and orthopaedic surgeons have applied the principles of mechanics to gain valuable information about the complex function of the anterior cruciate ligament (ACL). The results of these investigations have provided scientific data for surgeons to improve methods of ACL reconstruction and postoperative rehabilitation. This review paper will present specific examples of how the field of biomechanics has impacted the evolution of ACL research. The anatomy and biomechanics of the ACL as well as the discovery of new tools in ACL-related biomechanical study are first introduced. Some important factors affecting the surgical outcome of ACL reconstruction, including graft selection, tunnel placement, initial graft tension, graft fixation, graft tunnel motion and healing, are then discussed. The scientific basis for the new surgical procedure, i.e., anatomic double bundle ACL reconstruction, designed to regain rotatory stability of the knee, is presented. To conclude, the future role of biomechanics in gaining valuable in-vivo data that can further advance the understanding of the ACL and ACL graft function in order to improve the patient outcome following ACL reconstruction is suggested
A Criterion for Brittle Failure of Rocks Using the Theory of Critical Distances
This paper presents a new analytical criterion for brittle failure of rocks and heavily overconsolidated soils. Griffith’s model of a randomly oriented defect under a biaxial stress state is used to keep the criterion simple. The Griffith’s criterion is improved because the maximum tensile strength is not evaluated at the boundary of the defect but at a certain distance from the boundary, known as the critical distance. This fracture
criterion is known as the Point Method, and is part of the Theory of Critical Distances, which is utilized in fracture mechanics. The proposed failure criterion has two parameters: the inherent tensile strength, ó0, and the ratio of the half-length of the initial crack/flaw to the critical distance, a/L. These parameters are difficult to measure but they may be correlated with the uniaxial compressive and tensile strengths, óc and ót.
The proposed criterion is able to reproduce the common range of strength ratios for rocks and heavily overconsolidated soils (óc/ót=3-50) and the influence of several microstructural rock properties, such as texture and porosity. Good agreement with laboratory tests reported in the literature is found for tensile and low confining stresses.The work presented was initiated during a research project on “Structural integrity
assessments of notch-type defects", for the Spanish Ministry of Science and Innovation
(Ref.: MAT2010-15721)
Quadriceps tendinosis and patellar tendinosis in professional beach volleyball players: sonographic findings in correlation with clinical symptoms
The purpose was to assess quadriceps and patellar tendinosis in professional beach volleyball players and to correlate ultrasound findings with clinical symptoms. During a grand-slam beach volleyball tournaments all 202 athletes (100 men and 102 women) were invited to participate at this study. Sixty-one athletes (38 male, mean age 29.6, 23 female, mean age 27.1) were included. The dominant leg was right in 51 (84%) and left in ten athletes (16%). Lysholm knee score and pain during the game was assessed using a visual analogue scale. Sonography of the quadriceps tendon and the patellar tendon was performed by a blinded sonographer. Sonographic findings were compared between both legs and correlated to clinical findings using a regression analysis. Quadriceps tendinosis was diagnosed in 13 (21%, dominant leg)/21 (34%, non-dominant leg), patellar tendinosis in 13(21%)/18(30%). Only sonographic findings at the quadriceps tendon were significantly associated with pain: thickness of the quadriceps tendon (mean diameter 6.9 mm/7.1 mm, significant for both legs P = 0.011/P = 0.030), abnormal echo texture (11/16; P = 0.001/P = 0.228), areas with positive power Doppler signals (mean number 0.3/0.4; P = 0.049/0.346), calcifications (mean number: 0.9/1.1; P = 0.021/0.864). A relationship between findings at patellar tendon was not found. Quadriceps tendinosis is as common as patellar tendinosis in professional beach volleyball players. Thickening and structure alteration of the quadriceps tendon is associated with anterior knee pain during beach volleyball
Arthroscopic suture retrievers and shuttles: a biomechanical investigation of the force required for tendon penetration and defect size
BACKGROUND To compare instruments designed for arthroscopic suture handling during arthroscopic rotator cuff repair, to assess the force needed to penetrate the tendon, and to evaluate the residual defect size. METHODS Twenty-one instruments were each tested ten times on thawed sheep infraspinatus tendons. The force needed to pierce the tendon with each instrument was measured using a custom setup. Bone wax plates were used to make the perforation marks visible and to quantify the lesions each instrument created. RESULTS The force to pierce a tendon had a range of 5.6-18.5 N/mm. Within the group of suture retrievers, the angled instruments required in average 85 % higher forces than straight instruments. The lesion area had a range of 2-7 mm(2). Suture retrievers produced significantly larger lesion sizes compared with suture shuttles. CONCLUSION For the identical task of passing a suture through a tendon, differences exist regarding the ease of tendon penetration and potential damage to the tendon for different tools. The design, function, and resulting lesion size may be relevant and important for surgical handling and to avoid excess structural damage to the tendon. These results suggest that choosing the most appropriate tools for arthroscopic suture stitching influences the ease of handling and final integrity of the tissue. LEVEL OF EVIDENCE Mechanical evaluation of surgical devices
Effect of Vitamin D Status on Vascular Function of the Aorta in a Rat Model of PCOS
Polycystic ovary syndrome (PCOS) is associated with elevated cardiovascular risk. Early vascular dysfunction may lead to the development of cardiovascular disease in PCOS. Vitamin D deficiency (VDD) is a common comorbidity of PCOS that contributes to the pathogenesis of the disease and its complications. Both PCOS and VDD are accompanied by increased oxidative stress that may be involved in the arising vascular dysfunction. We aimed to investigate the role of vitamin D status on aortic function. PCOS was induced by an 8-week-long transdermal testosterone treatment of female rats, and low and adequate vitamin D status was achieved by dietary means. Contraction and relaxation abilities of isolated aortic segments were measured by myograph. Resorcin-fuchsin staining and immunohistochemical labeling of 3-nitrotyrosine were performed. No difference was shown in the norepinephrine-induced contraction of the aortas of different groups, whereas we detected reduced acetylcholine- and insulin-evoked relaxation in VDD groups. A lower level of resorcin-fuchsin staining and elevated 3-nitrotyrosine immunostaining was observed in VDD. In our study, we demonstrated early endothelial dysfunction in VDD PCOS rat model. Vitamin D supplementation could prevent vascular disturbances, while VDD itself damaged endothelium-dependent vasorelaxation and induced nitrative stress
- …