High-contrast imaging of 180{\deg} ferroelectric domains by optical microscopy using ferroelectric liquid crystals

Ferroelectric liquid crystals (FLCs) couple the direction of their spontaneous electric polarization to the direction of tilt of their optic axis. Consequently, reversal of the electric polarization by an electric field gives rise to an immediate and lasting optical response when an appropriately aligned FLC is observed between crossed polarizers, with one field direction yielding a dark image, and the opposite direction yielding a bright image. Here this peculiar electro-optic response is used to image, with high optical contrast, 180{\deg} ferroelectric domains in a crystalline substrate of magnesium-doped lithium niobate. The lithium niobate substrate contains a few domains with upwards electric polarization surrounded by regions with downward electric polarization. In contrast to a reference non-chiral liquid crystal that is unable to show ferroelectric behavior due to its high symmetry, the FLC, which is used as a thin film confined between the lithium niobate substrate and an inert aligning substrate, reveals ferroelectric domains as well as their boundaries, with strong black and white contrast. The results show that FLCs can be used for non-destructive read-out of domains in underlying ferroelectrics, with potential applications in e.g. photonic devices and non-volatile ferroelectric memories.Comment: 12 pages, 3 figure

Dynamic tuning of the director field in liquid crystal shells using block copolymers

When an orientationally ordered system, like a nematic liquid crystal (LC), is confined on a self-closing spherical shell, topological constraints arise with intriguing consequences that depend critically on how the LC is aligned in the shell. We demonstrate reversible dynamic tuning of the alignment, and thereby the topology, of nematic LC shells stabilized by the nonionic amphiphilic block copolymer Pluronic F127. Deep in the nematic phase, the director (the average molecule orientation) is tangential to the interface, but upon approaching the temperature TNI of the nematic– isotropic transition, the director realigns to normal. We link this to a delicate interplay between an interfacial tension that is nearly independent of director orientation, and the configurationdependent elastic deformation energy of an LC confined in a shell. The process is primarily triggered by the heating-induced reduction of the nematic order parameter, hence realignment temperatures differ by several tens of degrees between LCs with high and low TNI , respectively. The temperature of realignment is always lower on the positive-curved shell outside than at the negative-curved inside, yielding a complex topological reconfiguration on heating. Complementing experimental investigations with mathematical modeling and computer simulations, we identify and investigate three different trajectories, distinguished by their configurations of topological defects in the initial tangential-aligned shell. Our results uncover a new aspect of the complex response of LCs to curved confinement, demonstrating that the order of the LC itself can influence the alignment and thereby the topology of the system. They also reveal the potential of amphiphilic block copolymer stabilizers for enabling continuous tunability of LC shell configuration, opening doors for in-depth studies of topological dynamics as well as novel applications in, e.g., sensing and programmed soft actuators

Responsive Photonic Liquid Marbles

Liquid marbles have potential to serve as mini-reactors for fabricating new materials, but this has been exploited little and mostly for conventional chemical reactions. Here, we uncover the unparalleled capability of liquid marbles to act as platforms for controlling the self-assembly of a bio-derived polymer, hydroxypropyl cellulose, into a cholesteric liquid crystalline phase showing structural coloration by Bragg reflection. By adjusting the cholesteric pitch via quantitative water extraction, we achieve liquid marbles that we can tailor for structural color anywhere in the visible range. Liquid marbles respond with color change that can be detected by eye, to changes in temperature, exposure to toxic chemicals and mechanical deformation. Our concept demonstrates the advantages of using liquid marbles as a miniature platform for controlling the liquid crystal self-assembly of bio-derived polymers, and their exploitation to fabricate sustainable, responsive soft photonic objects

Tunable templating of photonic microparticles via liquid crystal order-guided adsorption of amphiphilic polymers in emulsions

Multiple emulsions are usually stabilized by amphiphilic molecules that combine the chemical characteristics of the different phases in contact. When one phase is a liquid crystal (LC), the choice of stabilizer also determines its configuration, but conventional wisdom assumes that the orientational order of the LC has no impact on the stabilizer. Here we show that, for the case of amphiphilic polymer stabilizers, this impact can be considerable. The mode of interaction between stabilizer and LC changes if the latter is heated close to its isotropic state, initiating a feedback loop that reverberates on the LC in form of a complete structural rearrangement. We utilize this phenomenon to dynamically tune the configuration of cholesteric LC shells from one with radial helix and spherically symmetric Bragg diffraction to a focal conic domain configuration with highly complex optics. Moreover, we template photonic microparticles from the LC shells by photopolymerizing them into solids, retaining any selected LC-derived structure. Our study places LC emulsions in a new light, calling for a reevaluation of the behavior of stabilizer molecules in contact with long-range ordered phases, while also enabling highly interesting photonic elements with application opportunities across vast fields

Electrospun Composite Liquid Crystal Elastomer Fibers

We present a robust method to prepare thin oriented nematic liquid crystalline elastomer-polymer (LCE-polymer) core-sheath fibers. An electrospinning setup is utilized to spin a single solution of photo-crosslinkable low molecular weight reactive mesogens and a support polymer to form the coaxial LCE-polymer fibers, where the support polymer forms the sheath via in situ phase separation as the solvent evaporates. We discuss the effect of phase separation and compare two different sheath polymers (polyvinylpyrrolidone and polylactic acid), investigating optical and morphological properties of obtained fibers, as well as the shape changes upon heating. The current fibers show only irreversible contraction, the relaxation most likely being hindered by the presence of the passive sheath polymer, increasing in stiffness on cooling. If the sheath polymer can be removed while keeping the LCE core intact, we expect LCE fibers produced in this way to have potential to be used as actuators, for instance in soft robotics and responsive textiles

Quantitative volatile organic compound sensing with liquid crystal core fibers

Polymer fibers with liquid crystals (LCs) in the core have potential as autonomous sensors of airborne volatile organic compounds (VOCs), with a high surface-to-volume ratio enabling fast and sensitive response and an attractive non-woven textile form factor. We demonstrate their ability to continuously and quantitatively measure the concentration of toluene, cyclohexane, and isopropanol as representative VOCs, via the impact of each VOC on the LC birefringence. The response is fully reversible and repeatable over several cycles, the response time can be as low as seconds, and high sensitivity is achieved when the operating temperature is near the LC-isotropic transition temperature. We propose that a broad operating temperature range can be realized by combining fibers with different LC mixtures, yielding autonomous VOC sensors suitable for integration in apparel or in furniture that can compete with existing consumer-grade electronic VOC sensors in terms of sensitivity and response speed