Development of quartz fiber calorimetry

Embedding radiation hard (up to Gigarad levels) silica optical fibres into an absorber is proposed for applications in very forward LHC calorimeters. The shower particles produce Cherenkov light. The main advantages of this solution are the fast response (signal duration below 10 ns), transverse dimension of the visible energy of hadronic showers of the order of 1 cm, and insensitivity to radio- and neutron- activation. A comprehensive study of the performance of such detector is proposed

Catalytic Tri-reforming of Biomass-Derived Syngas to Produce Desired H2:CO Ratios for Fuel Applications

This study focuses on upgrading biomass derived syngas for the synthesis of liquid fuels using Fischer-Tropsch synthesis (FTS). The process includes novel gasification of biomass via a tri-reforming process which involves a synergetic combination of CO2 reforming, steam reforming, and partial oxidation of methane. Typical biomass-derived syngas H2:CO is 1:1 and contains tars that deactivate FT catalyst. This innovation allows for cost-effective one-step production of syngas in the required H2:CO of 2:1 with reduction of tars for use in the FTS. To maximize the performance of the tri-reforming catalyst, an attempt to control oxygen mobility, thermal stability, dispersion of metal, resistance to coke formation, and strength of metal interaction with support is investigated by varying catalyst synthesis parameters. These synthesis variables include Ce and Zr mixed oxide support ratios, amount Mg and Ni loading, and the preparation of the catalyst. Reaction conditions were also varied to determine the influences reaction temperature, gas composition, and GHSV have on the catalyst performance. Testing under controlled reaction conditions and the use of several catalyst characterization techniques (BET, XRD, TPR, XAFS, SEM-EDS, XPS) were employed to better explain the effects of the synthesis parameters. Applications of the resulting data were used to design proof of concept solar powered BTL plant. This paper highlights the performance of the tri-reforming catalyst under various reaction conditions and explains results using catalyst characterization

Joining by forming technologies: current solutions and future trends

The progressively more demanding needs of emissions and costs reduction in the transportation industry are pushing engineers towards the use of increasingly lightweight structures. This goal can be achieved only if dissimilar and/or new materials, including polymers and composites, are joined together to create complex structures. Conventional fusion welding processes have often been proven inadequate to this task because of the high heat input reducing the joint mechanical properties or even making the joining process impossible. Joining by forming technologies take advantage on the plastic deformation to create sound joints out of even very dissimilar materials. Over the last 25 years, several new processes, with increasing potential in effectively joining virtually every structural material, have been invented and developed. In the paper, a comprehensive overview of the most utilized joining by forming processes is given. For each process, an analysis of the current research trends and hot topics is provided, highlighting strengths and weaknesses for industrial applications

Test Management Automation: Lessons Learned from a Process Improvement Experiment

Test management aims at organizing, documenting and executing test cases, and at generating execution reports. The adoption of a support tool and of a standard process for such activities is expected to improve the current practice. ITALO is an European project devoted to the evaluation of the benefits coming from test management automation. In this paper the experiences collected and the lessons learned during ITALO are summarized. A formal methodology was adopted for the selection of a support tool among those available from the market. A survey of the current practice in component testing was conducted to adapt the existing process model so as to obtain the greatest benefits from automation. An experiment was then designed to measure the effects that are expected to be produced by the new test process complemented with the introduction of the support tool. Pilot projects were conducted to measure the benefits obtained from tool usage and process modification. Results are presented in this paper, together with a discussion that allows their interpretatio