4,815 research outputs found
Photographic image enhancement and processing
Image processing techniques (computer and photographic) are described which are used within the JSC Photographic Technology Division. Two purely photographic techniques used for specific subject isolation are discussed in detail. Sample imagery is included
Evaluation of film type QX 807 (SO-368, Kodak Ektachrome MS, Estar thin base, with an equivalent Wratten 2A filter overcoat)
A color film with a sensitivity and color balance equal to SO-368, Kodak MS Ektachrome (Estar thin base) was required for use on the Apollo-Soyuz test project (ASTP). A Wratten 2A filter was required for use with the film to reduce short wavelength effects which frequently produce a blue color balance in aerial photographs. The background regarding a special emulsion which was produced with a 2A filter equivalent as an integral part of an SO-368 film manufactured by Eastman Kodak, the cost for production of the special film, and the results of a series of tests made within PTD to certify the film for ASTP use are documented. The tests conducted and documented were physical inspection, process compatibility, effective sensitivity, color balance, cross section analysis, resolution, spectral sensitivity, consistency of results, and picture sample analysis
Water penetration study
Nine film-filter combinations have been tested for effectiveness in recording water subsurface detail when exposed from an aerial platform over a typical water body. An experimental 2-layer positive color film, a 2-layer (minus blue layer) film, a normal 3-layer color film, a panchromatic black-and-white film, and an infrared film with selected filters were tested. Results have been tabulated to show the relative capability of each film-filter combination for: (1) image contrast in shallow water (0 to 5 feet); (2) image contrast at medium depth (5 to 10 feet); (3) image contrast in deep water (10 feet plus); (4) water penetration; maximum depth where detail was discriminated; (5) image color (the spectral range of the image); (6) vegetation visible above a water background; (7) specular reflections visible from the water surface; and (8) visual compatibility; ease of discriminating image detail. Recommendations for future recording over water bodies are included
Landing arrangement for aerospace vehicle Patent
Aerospace vehicle with variable planform for hypersonic and subsonic fligh
Landing arrangement for aerial vehicle Patent
Aerodynamic configuration for aircraft capable of high speed flight and low drag for low speed takeoff or landing upon presently existing airfield
Do Elections Always Motivate Incumbents?.
This paper studies a principal-agent model of the relationship between office-holders and the electorate, where the office-holder is initially uninformed about herability (following Holmström, 1999). If office-holder effort and ability interact in the "production function" that determines performance in office, then an office-holder has an incentive to experiment, i.e. raise effort so that performance becomes a more accurate signal of her ability.ELECTIONS ; BUSINESS CYCLES ; PRODUCTION
Subsonic wind tunnel investigation of a twin-engine attack airplane model having nonmetric powered nacelles
A 1/10-scale powered model of a twin-engine attack airplane was investigated in the Langley high-speed 7- by 10-foot tunnel. The study was made at several Mach numbers between 0.225 and 0.75 which correspond to Reynolds numbers, based on the mean aerodynamic chord, of 1.35 million and 3.34 million. Unheated compressed air was used for jet simulation in the nonmetric engine nacelles which were located ahead of and above the horizontal stabilizer
The size and shape of the oblong dwarf planet Haumea
We use thermal radiometry and visible photometry to constrain the size,
shape, and albedo of the large Kuiper belt object Haumea. The correlation
between the visible and thermal photometry demonstrates that Haumea's high
amplitude and quickly varying optical light curve is indeed due to Haumea's
extreme shape, rather than large scale albedo variations. However, the
well-sampled high precision visible data we present does require longitudinal
surface heterogeneity to account for the shape of lightcurve. The thermal
emission from Haumea is consistent with the expected Jacobi ellipsoid shape of
a rapidly rotating body in hydrostatic equilibrium. The best Jacobi ellipsoid
fit to the visible photometry implies a triaxial ellipsoid with axes of length
1920 x 1540 x 990 km and density 2.6 g cm^-3$, as found by Lellouch et
al(2010). While the thermal and visible data cannot uniquely constrain the full
non-spherical shape of Haumea, the match between the predicted and measured
thermal flux for a dense Jacobi ellipsoid suggests that Haumea is indeed one of
the densest objects in the Kuiper belt.Comment: 21 pages, 2 figures, 2 tables -- Accepted for publication in Earth,
Moon and Planet
- …