3,496 research outputs found
Crack identification of functionally graded beams using continuous wavelet transform
© 2018 Elsevier Ltd This paper proposes a new damage index for the crack identification of beams made of functionally graded materials (FGMs) by using the wavelet analysis. The damage index is defined based on the position of the wavelet coefficient modulus maxima in the scale space. The crack is assumed to be an open edge crack and is modeled by a massless rotational spring. It is assumed that the material properties follow exponential distributions along the beam thickness direction. The Timoshenko beam theory is employed to derive the governing equations which are solved analytically to obtain the frequency and mode shape of cracked FGM beams. Then, we apply the continuous wavelet transform (CWT) to the mode shapes of the cracked FGM beams. The locations of the cracks are determined from the sudden changes in the spatial variation of the damage index. An intensity factor, which relates to the size of the crack and the coefficient of the wavelet transform, is employed to estimate the crack depth. The effects of the crack size, the crack location and the Young's modulus ratio on the crack depth detection are investigated
Adsorption of pyridine from aqueous solutions by polymeric adsorbents MN 200 and MN 500. Part 1: Adsorption performance and PFG-NMR studies
The removal of pyridine from aqueous solutions was carried out using Macronet polymeric adsorbents MN 200 and MN 500. The optimal pyridine uptakes were in approximately neutral solutions as a result of optimal effect of π -π hydrophobic and attractive electrostatic interactions between pyridine and the adsorbents. These adsorbents showed superior pyridine uptake capacities than some apatite and activated carbons in isotherm studies. Thermodynamic analysis showed that pyridine adsorption is exothermic on MN 200 and endothermic on MN 500, implying that the adsorption on MN 500 is an activated process, which is attributed to the presence of sulfonic acid groups. Pseudo-first and second order rate models were used to fit the adsorption kinetics for the adsorbents. Translational dynamics of guest molecules within the porous polymers was analysed by PFG-NMR diffusion technique and the diffusion behaviour was characterised by two distinctive diffusion regions. PFG-NMR derived self-diffusion coefficients of pyridine in MN 500 were much slower than the expected diffusion coefficients based on a purely geometrical confinement effect, which suggests the interaction of pyridine with the sulfonic acid groups on MN 500 and their stronger effect on diffusivity also enhances the adsorption performance of this adsorbent. These studies reveal new insights into adsorption properties of pyridine in porous polymers in relation to the structural and surface properties probed by PFG-NMR and account for the effectiveness of these adsorbents in the treatment of waste water containing the aromatic N-heterocyclic compound.Carmine D’Agostino would like to acknowledge Wolfson College, Cambridge, for supporting his research activities.This is the author accepted manuscript. The final version is available from Elsevier at http://dx.doi.org/10.1016/j.cej.2016.07.039
Assessing the use of NMR chemical shifts for prediction of VLE in non-ideal binary liquid mixtures
A method of estimating vapour liquid equilibrium (VLE) using NMR chemical shift data has been proposed by Xu et al. (2012). This method is based on the concept that the average local composition around each species is determined by the thermodynamics of the system, and also determines the screening of the NMR active groups within that molecule, and so their NMR chemical shifts. Xu et al.‘s method has been replicated and verified; results are confirmed to be accurate for alcohol + hydrocarbon mixtures, giving VLE predictions of comparable accuracy to the UNIFAC, generally considered the best predictive activity coefficient model available. However, for more strongly non-ideal mixtures, the method becomes less reliable, giving significantly less accurate predictions of total pressure than UNIFAC. Several causes for this are identified. The model proposed by Xu et al. (2012) is unable to fit minima or maxima in chemical shifts, which are observed experimentally in some binary mixtures. Different NMR resonances within the same molecule lead to different predictions of VLE, clearly an un-physical result. The thermodynamics of strongly non-ideal mixtures are determined by more complex interactions than a simple description of average local composition around each component in the mixtures, for example strong and directional hydrogen bonds. Different groups within the same molecule may have different local compositions in their immediate vicinity; for example in the case of alcohol + water mixtures, one would expect a clustering of water molecules around the hydroxyl group but not the aliphatic group. Hence, the concept of a simple local composition model is not valid for these more complex cases, and it is therefore not surprising that a model based on this simple concept is often not effective in predicting VLE.C. D’Agostino would like to acknowledge Wolfson College, Cambridge, for supporting his research activities.This is the accepted manuscript. The final version is available from Elsevier at http://www.sciencedirect.com/science/article/pii/S0009250914004461
Prediction of mutual diffusion coefficients in binary liquid systems with one self-associating component from viscosity data and intra-diffusion coefficients at infinite dilution
© 2016 Elsevier Ltd. A new model for prediction of mutual diffusion coefficients is proposed over the whole composition range for binary liquid systems of one self-associating component and one non-polar component. The model is based on the Darken equation with the knowledge of intra-diffusion coefficients at infinite dilution of both species and viscosity data for the system, and takes into account the cluster diffusion approach with a scaling power on the thermodynamic correction factor. The model was validated to show good concurrence with the experimental mutual diffusion data. Following the analysis that the mutual diffusion coefficients at infinite dilution can be identified with the molecular intra-diffusion coefficient of the species (i.e., the intra-diffusion coefficient at infinite dilution in the absence of self-association), the proposed equation was extended to binary liquid systems without significant association. The accuracy of prediction for systems of cross associating species is expected to be limited. The model relies on the knowledge of the viscosity of the mixture over the whole composition range and may be used as a valid alternative to models based on measuring intra-diffusion coefficients as a function of composition. Indeed, such data are not always available or are more difficult to obtain whereas viscosity measurements can be readily available and more easily measured.C. D’Agostino would like to acknowledge Wolfson College, Cambridge, for supporting his research activities
Failure detection of closed-loop systems and application to SI engines
The existing methods of engine fault detection and isolation are based on open-loop control, which are not applicable to closed-loop control systems. In this paper a new fault detection and isolation method for closed-loop control systems is presented. The validity of this method is verified by simulation results. First, the method was tested on the nonlinear simulation of SI engines, the Mean Value Engine Model (MVEM) with different faults was simulated. The neural network based engine air path model was constructed, which was trained with engine input/output data. Then Radial Basis Function (RBF) neural network was used to model the SI engine. The drawback of the training data acquisition was analyzed and a new data acquisition method was proposed, that greatly improved the model accuracy. © 2017, Editorial Board of Jilin University. All right reserved
Arsenic trioxide, a potent inhibitor of NF-κB, abrogates allergen-induced airway hyperresponsiveness and inflammation
BACKGROUND: Overactivation of nuclear factor κB (NF-κB) orchestrates airway eosinophilia, but does not dampen airway hyperresponsiveness in asthma. NF-κB repression by arsenic trioxide (As(2)O(3)) contributes to apoptosis of eosinophils (EOS) in airways. Here we provide evidence that As(2)O(3 )abrogates allergen (OVA)-induced airway eosinophilia by modulating the expression of IκBα, an NF-κB inhibitory protein, and decreases the airway hyperresponsiveness. METHODS: Using a murine model of asthma, the airway hyperresponsiveness was conducted by barometric whole-body plethysmography. Airway eosinophilia, OVA-specific IgE in serum, and chemokine eotaxin and RANTES (regulated upon activation, normal T cell expressed and secreted) in bronchoalveolar lavage fluid were measured by lung histology, Diff-Quick staining, and ELISA. Chemokine-induced EOS chemotactic activity was evaluated using EOS chemotaxis assay. Electrophoretic mobility shift assay and Western blot analysis were performed to assess pulmonary NF-κB activation and IκBα expression, respectively. RESULTS: As(2)O(3 )attenuated the allergen-induced serum IgE, chemokine expression of eotaxin and RANTES, and the EOS recruitment in bronchoalveolar lavage fluid, which is associated with an increased IκBα expression as well as a decreased NF-κB activation. Also, As(2)O(3 )suppressed the chemotaxis of EOS dose-dependently in vitro. Additionally, As(2)O(3 )significantly ameliorated the allergen-driven airway hyperresponsiveness, the cardinal feature underlying asthma. CONCLUSION: These findings demonstrate an essential role of NF-κB in airway eosinophilia, and illustrate a potential dissociation between airway inflammation and hyperresponsiveness. As(2)O(3 )likely exerts its broad anti-inflammatory effects by suppression of NF-κB activation through augmentation of IκBα expression in asthma
Wall roughness induces asymptotic ultimate turbulence
Turbulence is omnipresent in Nature and technology, governing the transport
of heat, mass, and momentum on multiple scales. For real-world applications of
wall-bounded turbulence, the underlying surfaces are virtually always rough;
yet characterizing and understanding the effects of wall roughness for
turbulence remains a challenge, especially for rotating and thermally driven
turbulence. By combining extensive experiments and numerical simulations, here,
taking as example the paradigmatic Taylor-Couette system (the closed flow
between two independently rotating coaxial cylinders), we show how wall
roughness greatly enhances the overall transport properties and the
corresponding scaling exponents. If only one of the walls is rough, we reveal
that the bulk velocity is slaved to the rough side, due to the much stronger
coupling to that wall by the detaching flow structures. If both walls are
rough, the viscosity dependence is thoroughly eliminated in the boundary layers
and we thus achieve asymptotic ultimate turbulence, i.e. the upper limit of
transport, whose existence had been predicted by Robert Kraichnan in 1962
(Phys. Fluids {\bf 5}, 1374 (1962)) and in which the scalings laws can be
extrapolated to arbitrarily large Reynolds numbers
Hydrothermal-assisted exfoliation of Y/Tb/Eu ternary layered rare-earth hydroxides into tens of micron-sized unilamellar nanosheets for highly oriented and color-tunable nano-phosphor films
Short review on porous metal membranes—Fabrication, commercial products, and applications
© 2018 by the authors. Licensee MDPI, Basel, Switzerland. Porous metal membranes have recently received increasing attention, and significant progress has been made in their preparation and characterisation. This progress has stimulated research in their applications in a number of key industries including wastewater treatment, dairy processing, wineries, and biofuel purification. This review examines recent significant progress in porous metal membranes including novel fabrication concepts and applications that have been reported in open literature or obtained in our laboratories. The advantages and disadvantages of the different membrane fabrication methods were presented in light of improving the properties of current membrane materials for targeted applications. Sintering of particles is one of the main approaches that has been used for the fabrication of commercial porous metal membranes, and it has great advantages for the fabrication of hollow fibre metal membranes. However, sintering processes usually result in large pores (e.g., >1 µm). So far, porous metal membranes have been mainly used for the filtration of liquids to remove the solid particles. For porous metal membranes to be more widely used across a number of separation applications, particularly for water applications, further work needs to focus on the development of smaller pore (e.g., sub-micron) metal membranes and the significant reduction of capital and maintenance costs
Nanofluids Containing γ-Fe2O3 Nanoparticles and Their Heat Transfer Enhancements
Homogeneous and stable magnetic nanofluids containing γ-Fe2O3 nanoparticles were prepared using a two-step method, and their thermal transport properties were investigated. Thermal conductivities of the nanofluids were measured to be higher than that of base fluid, and the enhanced values increase with the volume fraction of the nanoparticles. Viscosity measurements showed that the nanofluids demonstrated Newtonian behavior and the viscosity of the nanofluids depended strongly on the tested temperatures and the nanoparticles loadings. Convective heat transfer coefficients tested in a laminar flow showed that the coefficients increased with the augment of Reynolds number and the volume fraction
- …