Development of a Low-Cost Ball-on-Flat Linear Reciprocating Apparatus: Test Validation Using Ti-6Al-4V and Ti-6Al-4V/Nb2O5 Coatings

Abstract: This work aims to propose the development of a low-cost ball-on-flat linear reciprocating apparatus that can have the same attributes of extremely expensive equipment available on the market. For this purpose, the device was constructed following the recommendations of the ASTM G133 standard. The device’s validation was performed trough a comparative study between the ASTM G133 standard and 3D profilometry technique by using Ti-6Al-4V and Ti-6Al-4V/Nb2O5 specimens. The results obtained in the present work were very motivating by showing it was possible to obtain the wear properties with reproducibility through the equipment constructed. The wear tests showed that the functionalization of the Ti-6Al-4V alloy with Nb2O5 coatings increased the wear resistance of the biomaterial, reducing the wear volume about 80.1 % when compared to the base material. Finally, this work demonstrated (i) the effectiveness and reproducibility of the device built to carry out microwear tests, (ii) the increase in resistance to the mechanical wear process conferred by the Nb2O5 film on the Ti-6Al-4V alloy and (iii) the powerful impact of the 3D profilometry technique when compared to the ASTM G133 standard for wear volume determination

Riscos e Retornos da Cafeicultura em Minas Gerais: uma análise de custos e diferenciação

O objetivo deste trabalho foi analisar, comparativamente, o desempenho dos produtores de café do Cerrado mineiro e do sudoeste do estado, de acordo com o retorno obtido e o nível de risco. Dadas as opções estratégicas adotadas nessas duas regiões, a diferenciação e os custos foram enfatizados. As margens e os potenciais de perda dos dois grupos de cafeicultores foram mensurados, o que permitiu apresentar uma relação entre risco e retorno. Os retornos foram estimados por um índice que relaciona custos e preços - margem operacional -, e a análise de riscos foi realizada a partir das estimativas do Value at Risk. Os resultados indicaram que os produtores do Cerrado, além de terem obtido melhores retornos, apresentaram menores perdas potencias que os do sudoeste. Os resultados favoráveis aos cafeicultores do Cerrado foram relacionados às diferenças dos custos produtivos e da qualidade do café. Incrementos na qualidade do produto e melhorias na gestão do processo produtivo foram os aspectos considerados relevantes para melhorar o desempenho do produtor do sudoeste. Já em relação à cafeicultura do Cerrado, destacou-se a importância de manter os esforços ligados à diferenciação e à produtividade.<br>This paper aimed to analyze the comparative performance from the Minas Gerais "Cerrado" coffee producers and the south-western conventional coffee producers, according to the returns and the risk level. Differentiation and costs were emphasized because they were the strategic options adopted by the grower in these two regions The margins and potential loss of these two producer groups were measured, in a way that a relation between risks and returns could be presented. The returns were estimated by an index that relates costs and prices - operational margin -, and risk analysis was conducted based on Value at Risk estimates. The results indicated that, besides obtaining better returns, the Minas Gerais "Cerrado" producers had smaller loss potential than those from the south-west. The favorable results obtained by the Minas Gerais "Cerrado" coffee producers were related to the differences in productive costs and coffee quality. Improved product quality and productive management were the most relevant aspects found to enhance the performance of the south-western coffee producer. As for the "Cerrado" coffee production, the importance of maintaining the efforts related to differentiation and to the productivity was pointed out

Avaliação da capacidade de infiltração de solos submetidos a diferentes tipos de manejo Evaluation of the infiltration capacity of soils under ferent types of management

O manejo inadequado da vegetação e do solo leva a mudanças físicas que afetam a recarga de aquíferos. A Chapada do Araripe possui centenas de fontes que jorram na encosta; porém, há indícios de redução de vazões. Neste trabalho foi estudada a capacidade de infiltração de solos submetidos a diferentes tipos de manejo florestal na Chapada. Amostras de solos de 21 localidades foram ordenadas em quatro grupos. O Grupo 1, de áreas de vegetação preservada e os demais de áreas antropizadas. Observou-se que a umidade e capacidade de infiltração apresentaram boa correlação linear com a matéria orgânica; a umidade média do Grupo 1, no período seco, foi superior à dos demais grupos mesmo no período chuvoso; as áreas antropizadas apresentaram baixo conteúdo de matéria orgânica, umidade e baixa capacidade de infiltração, indicando modificação na estrutura do solo capaz de reduzir a recarga.<br>Inadequate vegetation and soil management leads to physical changes that affect aquifer recharge. The Araripe Plateau feeds an elevated number of springs on its northern slope; however, there are indications that their yield is decreasing. Through this research, it was studied the infiltration capacity of soils under different types of management. Soil samples from 21 sites were grouped into four groups. Group 1 represents areas of preserved vegetation, the others, anthropized ones. It was observed that soil moisture and infiltration capacity are linearly well correlated with organic matter; mean soil moisture during the dry season was significantly higher for Group 1 than for the other groups, even during the rainy season and anthropized areas show low organic matter contents, soil moisture, and infiltration capacity, indicating modifications in the soil's structure that reduce aquifer recharge