Pre-conceptual design and preliminary neutronic analysis of the proposed National Spallation Neutron Source (NSNS)

The Department of Energy (DOE) has initiated a pre-conceptual design study for the National Spallation Neutron Source (NSNS) and given preliminary approval for the proposed facility to be built at Oak Ridge National Laboratory (ORNL). The pre-conceptual design of the NSNS initially consists of an accelerator system capable of delivering a 1 to 2 GeV proton beam with 1 MW of beam power in an approximate 0.5 {micro}s pulse at a 60 Hz frequency onto a single target station. The NSNS will be upgradable to a significantly higher power level with two target stations (a 60 Hz station and a 10 Hz station). There are many possible layouts and designs for the NSNS target stations. This paper gives a brief overview of the proposed NSNS with respect to the target station, as well as the general philosophy adopted for the neutronic design of the NSNS target stations. A reference design is presented, and some preliminary neutronic results for the NSNS are briefly discussed

Overview of the national spallation neutron source with emphasis on the target station

The technologies that are being utilized to design and build a state-of-the-art neutron spallation source, the National Spallation Neutron Source (NSNS), are discussed. Emphasis is given to the technology issues that present the greatest scientific challenges. The present facility configuration, ongoing analysis and the planned hardware research and development program are also described

The national spallation neutron source target station: A general overview

The technologies that are being utilized to design and build a state-of-the-art neutron spallation source, the National Spallation Neutron Source (NSNS), are discussed. Emphasis is given to the technology issues that present the greatest scientific challenges. The present facility configuration, ongoing analysis and the planned hardware research and development program are also described

Radioactive foil analysis of 1.5 GeV proton bombardment of a Hg target

The number of reactant nuclei in a series of foils surrounding a container of Hg that has been bombarded by 1.5 GeV protons is calculated and compared to experimental measurements. This is done to aid in the validation of the Hg cross sections used in the design studies of the Spallation Neutron Source (SNS). It was found that the calculations match the measurements to within the uncertainties inherent in the analysis

Shielding and neutronic optimization of the National Spallation Neutron Source (NSNS)

Studies are now underway to establish initial design characteristics for the pulsed neutron source NSNS facility and to optimize the design. In this paper the methodology of calculation is presented together with the calculated facility characteristics. Optimization studies are discussed and initial results shown. This paper addresses the target station of the NSNS

Neutronic moderator design for the Spallation Neutron Source (SNS)

Neutronics analyses are now in progress to support the initial selection of moderator design parameters for the Spallation Neutron Source (SNS). The results of the initial optimization studies involving moderator poison plate location, moderator position, and premoderator performance for the target system are presented in this paper. Also presented is an initial study of the use of a composite moderator to produce a liquid methane like spectrum

Performance, milk fatty acid composition and behaviour of high-yielding Holstein dairy cows given a limited grazing period

The effects of a limited grazing period on the performance, behaviour and milk composition of high‐yielding dairy cows were examined. A total of 56 Holstein cows yielding 44.7 ± 0.42 kg/day were allocated to one of four treatments in one of two, 4‐week periods. Treatments were as follows: control (C)—cows housed and offered TMR ad libitum; early grazing (EG)—cows grazed for 6 hr after morning milking then housed; delayed grazing (DG)—cows returned to housing for 1 hr after morning milking followed by grazing for 6 hr, then housed; restricted TMR (RT)—cows grazed for 6 hr after morning milking, then housed and fed TMR at 75% of ad libitum. Intake of TMR was highest in cows receiving C, intermediate in EG and DG, and lowest in RT at 26.9, 23.6, 24.7 and 20.3 kg DM/day respectively. Pasture intake was similar in cows receiving EG or DG, but was higher in RT at 2.4, 2.0 and 3.5 kg DM/day respectively. Milk yield was similar between cows receiving C, EG or DG, but lowest in RT at 45.7, 44.2, 44.9 and 41.7 kg/cow, respectively, while milk fat content of C18:3 n‐3 was increased by grazing. Cows in C spent more than 55 min/day longer lying and had three additional lying bouts/day, while lying bouts were shorter than for cows receiving EG, RT or DG. It is concluded that high‐yielding cows can be grazed for 6 hr/day with little impact on performance, provided TMR is available ad libitum when housed

First Measurement of Z/gamma* Production in Compton Scattering of Quasi-real Photons

We report the first observation of Z/gamma* production in Compton scattering of quasi-real photons. This is a subprocess of the reaction e+e- to e+e-Z/gamma*, where one of the final state electrons is undetected. Approximately 55 pb-1 of data collected in the year 1997 at an e+e- centre-of-mass energy of 183 GeV with the OPAL detector at LEP have been analysed. The Z/gamma* from Compton scattering has been detected in the hadronic decay channel. Within well defined kinematic bounds, we measure the product of cross-section and Z/gamma* branching ratio to hadrons to be (0.9+-0.3+-0.1) pb for events with a hadronic mass larger than 60 GeV, dominated by (e)eZ production. In the hadronic mass region between 5 GeV and 60 GeV, dominated by (e)egamma* production, this product is found to be (4.1+-1.6+-0.6) pb. Our results agree with the predictions of two Monte Carlo event generators, grc4f and PYTHIA.Comment: 18 pages, LaTeX, 5 eps figures included, submitted to Physics Letters

Measurement of the Michel Parameters in Leptonic Tau Decays

The Michel parameters of the leptonic tau decays are measured using the OPAL detector at LEP. The Michel parameters are extracted from the energy spectra of the charged decay leptons and from their energy-energy correlations. A new method involving a global likelihood fit of Monte Carlo generated events with complete detector simulation and background treatment has been applied to the data recorded at center-of-mass energies close to sqrt(s) = M(Z) corresponding to an integrated luminosity of 155 pb-1 during the years 1990 to 1995. If e-mu universality is assumed and inferring the tau polarization from neutral current data, the measured Michel parameters are extracted. Limits on non-standard coupling constants and on the masses of new gauge bosons are obtained. The results are in agreement with the V-A prediction of the Standard Model.Comment: 32 pages, LaTeX, 9 eps figures included, submitted to the European Physical Journal