Effect of polymer concentration and length of hydrophobic end block on the unimer-micelle transition broadness in amphiphilic ABA symmetric triblock copolymer solutions

The effects of the length of each hydrophobic end block N_{st} and polymer concentration \bar{\phi}_{P} on the transition broadness in amphiphilic ABA symmetric triblock copolymer solutions are studied using the self-consistent field lattice model. When the system is cooled, micelles are observed, i.e.,the homogenous solution (unimer)-micelle transition occurs. When N_{st} is increased, at fixed \bar{\phi}_{P}, micelles occur at higher temperature, and the temperature-dependent range of micellar aggregation and half-width of specific heat peak for unimer-micelle transition increase monotonously. Compared with associative polymers, it is found that the magnitude of the transition broadness is determined by the ratio of hydrophobic to hydrophilic blocks, instead of chain length. When \bar{\phi}_{P} is decreased, given a large N_{st}, the temperature-dependent range of micellar aggregation and half-width of specific heat peak initially decease, and then remain nearly constant. It is shown that the transition broadness is concerned with the changes of the relative magnitudes of the eductions of nonstickers and solvents from micellar cores.Comment: 8 pages, 4 figure

The effect of asymmetry of the coil block on self-assembly in ABC coil-rod-coil triblock copolymers

Using the self-consistent field approach, the effect of asymmetry of the coil block on the microphase separation is focused in ABC coil-rod-coil triblock copolymers. For different fractions of the rod block $f_{\text B}$, some stable structures are observed, i.e., lamellae, cylinders, gyroid, and core-shell hexagonal lattice, and the phase diagrams are constructed. The calculated results show that the effect of the coil block fraction $f_{\text A}$ is dependent on $f_{\text B}$. When $f_{\text B}=0.2$, the effect of asymmetry of the coil block is similar to that of the ABC flexible triblock copolymers; When $f_{\text B}=0.4$, the self-assembly of ABC coil-rod-coil triblock copolymers behaves like rod-coil diblock copolymers under some condition. When $f_{\text B}$ continues to increase, the effect of asymmetry of the coil block reduces. For $f_{\text B}=0.4$, under the symmetrical and rather asymmetrical conditions, an increase in the interaction parameter between different components leads to different transitions between cylinders and lamellae. The results indicate some remarkable effect of the chain architecture on self-assembly, and can provide the guidance for the design and synthesis of copolymer materials.Comment: 9 pages, 3 figure

Spatial separation of anaerobic ammonium oxidation and nitrite-dependent anaerobic methane oxidation in permeable riverbeds.

Anaerobic ammonium oxidation (anammox) and nitrite-dependent anaerobic methane oxidation (n-damo) play important roles in nitrogen and carbon cycling in fresh waters but we do not know how these two processes compete for their common electron acceptor, nitrite. Here, we investigated the spatial distribution of anammox and n-damo across a range of permeable riverbed sediments. Anammox activity and gene abundance were detected in both gravel and sandy riverbeds and showed a simple, common vertical distribution pattern, while the patterns in n-damo were more complex and n-damo activity was confined to the more reduced, sandy riverbeds. Anammox was most active in surficial sediment (0-2cm), coincident with a peak in hzsA gene abundance and nitrite. In contrast, n-damo activity peaked deeper down (4-8cm) in the sandy riverbeds, coincident with a peak in n-damo 16S rRNA gene abundance and higher methane concentration. Pore water nitrite, methane and oxygen were key factors influencing the distribution of these two processes in permeable riverbeds. Furthermore, both anammox- and n-damo- activity were positively correlated with denitrification activity, suggesting a role for denitrification in supplying both processes with nitrite. Our data reveal spatial separation between anammox and n-damo in permeable riverbed sediments that potentially avoids them competing for nitrite. This article is protected by copyright. All rights reserved

Vacuum Polarization and Screening of Supercritical Impurities in Graphene

Screening of charge impurities in graphene is analyzed using the exact solution for vacuum polarization obtained from the massless Dirac-Kepler problem. For the impurity charge below certain critical value no density perturbation is found away from the impurity, in agreement with the linear response theory result. For supercritical charge, however, the polarization distribution is shown to have a power law profile, leading to screening of the excess charge at large distances. The Dirac-Kepler scattering states give rise to standing wave oscillations in the local density of states which appear and become prominent in the supercritical regime.Comment: 5 pages, 2 figure

Treatment effect of Bushen Huayu extract on postmenopausal osteoporosis in vivo

Bushen Huayu extract (BSHY), a traditional Chinese medicine, has been demonstrated to treat postmenopausal osteoporosis, however, the underlying mechanism remains to be fully elucidated. The aim of the present study was to investigate the therapeutic effect of BSHY and the mechanisms underlying this effect in an in vivo postmenopausal osteoporosis animal model. A total of 1 g BSHY containing 7.12 μg icariin was prepared. Low-dose BSHY (BSHY-L; 11.1 g/kg), medium-dose BSHY (BSHY-M; 22.2 g/kg) and high-dose BSHY (BSHY-H; 44.4 g/kg) was administered to oophorectomized rats using intragastric infusion. Estradiol (E2), interleukin-6 (IL-6) and serum alkaline phosphatase (ALP) levels, as well as bone density, were determined. It was found that the levels of serum ALP in the BSHY-L, BSHY-M and BSHY-H groups (197.75±41.74, 166.63±44.83 and 165.63±44.90 IU/l, respectively) were significantly decreased compared with the model group (299.13±45.79 IU/l; P<0.05), whilst the levels of E2 (16.89±1.71, 17.95±1.40 and 18.34±1.43 pg/ml, respectively) increased compared with the model group (14.54±1.61; P<0.05). In addition, the levels of IL-6 decreased in the BSHY-L, BSHY-M and BSHY-H groups (91.85±14.81, 82.99±15.65 and 80.54±14.61 pg/ml, respectively) compared with the model group (105.93±16.50 pg/ml; P<0.05). Furthermore, it was demonstrated that BSHY increased the bone density in the BSHY-L, BSHY-M and BSHY-H groups (0.20±0.014, 0.22±0.016 and 0.22±0.017 g/cm2, respectively) compared with the model group (0.19±0.011 g/cm2; P<0.05). BSHY was also found to increase the number of osteoblasts in the BSHY-L, BSHY-M and BSHY-H groups (25.38±2.17, 29.25±2.12 and 30.00±2.39, respectively), compared with in the model group (14.75±2.38; P<0.05), and decrease the number of osteoclasts in the BSHY-L, BSHY-M and BSHY-H groups (4.00±1.85, 4.25±1.39 and 5.75±1.49, respectively) compared with 9.50±1.60 observed in the model group (P<0.05). These results suggest that BSHY is a potential therapeutic drug for the treatment of osteoporosis in vivo. Furthermore, these results suggest that the mechanism by which BSHY decreases the serum levels of IL-6 may be by regulating E2.published_or_final_versio

Tunable microgel-templated porogel (MTP) bioink for 3D bioprinting applications

Micropores are essential for tissue engineering to ensure adequate mass transportation for embedded cells. Despite the considerable progress made by advanced 3D bioprinting technologies, it remains challenging to engineer micropores of 100 µm or smaller in cell-laden constructs. Here, a microgel-templated porogel (MTP) bioink platform is reported to introduce controlled microporosity in 3D bioprinted hydrogels in the presence of living cells. Templated gelatin microgels are fabricated with varied sizes (≈10, ≈45, and ≈100 µm) and mixed with photo-crosslinkable formulations to make composite MTP bioinks. The addition of microgels significantly enhances the shear-thinning and self-healing viscoelastic properties and thus the printability of bioinks with cell densities up to 1 × 108 mL−1 in matrix. Consistent printability is achieved for a series of MTP bioinks based on different component ratios and matrix materials. After photo-crosslinking the matrix phase, the templated microgels dissociated and diffused under physiological conditions, resulting in corresponding micropores in situ. When embedding osteoblast-like cells in the matrix phase, the MTP bioinks support higher metabolic activity and more uniform mineral formation than bulk gel controls. The approach provides a facile strategy to engineer precise micropores in 3D printed structures to compensate for the limited resolution of current bioprinting approaches