Heat induced evaporative antisolvent nanoprecipitation (HIEAN) of itraconazole

YesItraconazole (ITR) is an antifungal drug with a limited bioavailability due to its poor aqueous solubility. In this study, ITR was used to investigate the impact of nanonisation and solid state change on drug’s apparent solubility and dissolution. A bottom up approach to the production of amorphous ITR nanoparticles (NPs), composed of 100% drug, with a particle diameter below 250 nm, using heat induced evaporative antisolvent nanoprecipitation (HIEAN) from acetone was developed. The NPs demonstrated improved solubility and dissolution in simulated gastrointestinal conditions when compared to amorphous ITR microparticles. NPs produced with polyethylene glycol (PEG) or its methoxylated derivative (MPEG) as a stabiliser enabled the production of smaller NPs with narrower particle size distribution and enhanced apparent solubility. MPEG stabilised NPs gave the greatest ITR supersaturation levels (up to 11.6 ± 0.5 μg/ml) in simulated gastric fluids. The stabilising polymer was in an amorphous state. Dynamic vapour sorption data indicated no solid state changes in NP samples with water vapour at 25 °C, while crystallisation was apparent at 50 °C. HIEAN proved to be an efficient method of production of amorphous ITR NPs, with or without addition of a polymeric stabiliser, with enhanced pharmaceutical properties.Libyan Ministry of Higher Education and Scientific Research through the Libyan Embassy, London and supported by the Science Foundation Ireland under Grant No. 12/RC/2275 (Synthesis and Solid State Pharmaceuticals Centre)

Why is the change of the Johari-Goldstein β-relaxation time by densification in ultrastable glass minor?

Ultrastable glasses (USG) formed by vapor deposition are considerably denser. The onset temperature of devitrification, Ton, is significantly higher than Ton or Tg of ordinary glass (OG) formed by cooling, which implies an increase of the structural α-relaxation time by many orders of magnitude in USG compared to that in OG at the same temperature. However, for a special type of secondary relaxation having properties strongly connected to those of the α-relaxation, called the Johari-Goldstein β-relaxation, its relaxation time in USG is about an order of magnitude slower than that in OG and it has nearly the same activation energy, Eβ. The much smaller change in τβ and practically no change in Eβ by densification in USG are in stark contrast to the behavior of the α-relaxation. This cannot be explained by asserting that the Johari-Goldstein (JG) β-relaxation is insensitive to densification in USG, since the JG β-relaxation strength is significantly reduced in USG to such a level that it would require several thousands of years of aging for an OG to reach the same state, and therefore the JG β-relaxation does respond to densification in USG like the α-relaxation. Here, we provide an explanation based on two general properties established from the studies of glasses and liquids at elevated pressures and applied to USG. The increase in density of the glasses formed under high pressure can be even larger than that in USG. One property is the approximate invariance of the ratio τα(Ton)/τβ(Ton) to density change at constant τα(Ton), and the other is the same ργ/T-dependence of τβ in USG and OG where ρ is the density and γ is a material constant. These two properties are derived using the Coupling Model, giving a theoretical explanation of the phenomena. The explanation is also relevant for a full understanding of the experimental result that approximately the same surface diffusion coefficient is found in USG and OG with and without physical aging, and ultrathin films of a molecular glass-former

Why is surface diffusion the same in ultrastable, ordinary, aged, and ultrathin molecular glasses?

Recently Fakhraai and coworkers measured surface diffusion in ultrastable glass produced by vapor deposition, ordinary glass with and without physical aging, and ultrathin films of the same molecular glassformer, N,N0-bis(3-methylphenyl)-N,N0-diphenylbenzidine (TPD). Diffusion on the surfaces of all these glasses is greatly enhanced compared with the bulk diffusion similar to that previously found by others, but remarkably the surface diffusion coefficients DS measured are practically the same. The observed independence of DS from changes of structural a-relaxation due to densification or finite-size effect has an impact on the current understanding of the physical origin of enhanced surface diffusion. We have demonstrated before and also here that the primitive relaxation time t0 of the coupling model, or its analogue tb, the Johari–Goldstein b-relaxation, can explain quantitatively the enhancement found in ordinary glasses. In this paper, we assemble together considerable experimental evidence to show that the changes in tb and t0 of ultrastable glasses, aged ordinary glasses, and ultrathin-films are all insignificant when compared with ordinary glasses. Thus, in the context of the explanation of the enhanced surface diffusion given by the coupling model, these collective experimental facts on tb and t0 further explain approximately the same DS in the different glasses of TPD as found by Fakhraai and coworkers

A novel approach to crystallisation of nanodispersible microparticles by spray drying for improved tabletability

YesHigh-dose API powders which are to be tableted by direct compression should have high compactibility and compressibility. This note reports on a novel approach to the manufacture of crystalline powders intended for direct compaction with improved compactibility and compressibility properties. The poorly compactable API, chlorothiazide, was spray dried from a water/acetone solvent mix producing additive-free nanocrystalline microparticles (NCMPs) of median particle size 3.5 μm. Tablets compacted from NCMPs had tensile strengths ranging from 0.5 to 4.6 MPa (compared to 0.6–0.9 MPa for tablets of micronised CTZ) at compression forces ranging from 6 kN to 13 kN. NCMP tablets also had high porosities (34–20%) and large specific surface areas (4.4–4.8 m2/g). The time taken for tablets made of NCMPs to erode was not statistically longer (p > 0.05) than for tablets made of micronised CTZ. Fragmentation of NCMPs on compression was observed. The volume fraction of particles below 1 μm present in the suspension recovered after erosion of NCMP tablets was 34.8 ± 3.43%, while no nanosized particles were detected in the slurry after erosion of compacted micronised CTZ.Solid State Pharmaceutical Cluster (SSPC), supported by Science Foundation Ireland under grant number 07/SRC/B1158

Of Cell Shapes and Motion: The Physical Basis of Animal Cell Migration.

Motile cells have developed a variety of migration modes relying on diverse traction-force-generation mechanisms. Before the behavior of intracellular components could be easily imaged, cell movements were mostly classified by different types of cellular shape dynamics. Indeed, even though some types of cells move without any significant change in shape, most cell propulsion mechanisms rely on global or local deformations of the cell surface. In this review, focusing mostly on metazoan cells, we discuss how different types of local and global shape changes underlie distinct migration modes. We then discuss mechanical differences between force-generation mechanisms and finish by speculating on how they may have evolved

Self-assembled carrageenan/protamine polyelectrolyte nanoplexes-Investigation of critical parameters governing their formation and characteristics

YesThe aim of this work was to investigate the feasibility of cross-linker free polyelectrolyte complex formation at the nanoscale between carrageenan (CAR) and protamine (PROT). The properties of CAR/PROT nanoparticles (NPs) were dependent on the carrageenan type: kappa (KC), iota (IC) and lambda (LC), concentration of components, addition of divalent cations, weight mixing ratio (WMR) of constituents and mode of component addition. In the case of 0.1% w/v solutions, IC-based NPs had the smallest particle sizes (100-150nm) and low polydispersity indices (0.1-0.4). A decrease in the solution concentration from 0.1% to 0.05% w/v enabled the formation of KC/PROT NPs. All carrageenans exhibited the ability to form NPs with surface charge ranging from -190 to 40mV. The inclusion of divalent cations caused an increase in the particle size and zeta potential. Infrared analysis confirmed the presence of a complex between CAR and PROT and showed that IC chains undergo structural changes when forming NPs. Colloidal stability of NPs was related to the initial surface charge of particles and was time- and pH-dependent. IC was found to be the most suitable type of CAR when forming nanoplexes with PROT

Does the Johari-Goldstein β-Relaxation Exist in Polypropylene Glycols?

Secondary relaxations with properties closely related to the α-relaxation have fundamental importance in glass-forming substances including polymers. To distinguish these secondary relaxations from those involving intramolecular degrees of freedom, they are called the Johari-Goldstein (JG) β-relaxations. Acting as the precursor of the α-relaxation, the JG β-relaxation is supposedly ubiquitous in all glass-formers, a thesis supported by experiments on a variety of glass-formers. Notwithstanding, the JG β-relaxation has not been identified definitively in the hydroxyl-terminated polypropylene glycols (PPGs) with various molecular weights, despite these polymers have been intensively studied experimentally in the last several decades. The difficulty of finding the JG β-relaxation is due to the presence of a faster intramolecular -relaxation and a slower relaxation originating from residual water. This is demonstrated in two recent papers by Gainaru et al. Macromolecules 2010, 43, 1907, and Kaminski et al. Macromolecules 2013, 46, 1973. In this paper, we show the presence of the JG β-relaxation in the PPGs from the dielectric relaxation data by using the time honored criterion derived from the coupling model in conjunction with the observed anomalous temperature dependence of the -relaxation caused by merging with the JG β-relaxation, and new experimental data obtained by applying pressure on PPG4000 before and after drying the sample to remove the residual water. From the results, we conclude that the behavior of the PPGs is no different from the other glass-formers as far as the omnipresence of the JG β-relaxation is concerned

Impact of alternative solid state forms and specific surface area of high-dose, hydrophilic active pharmaceutical ingredients on tabletability

YesIn order to investigate the effect of using different solid state forms and specific surface area (TBET) of active pharmaceutical ingredients on tabletability and dissolution performance, the mono- and dihydrated crystalline forms of chlorothiazide sodium and chlorothiazide potassium (CTZK) salts were compared to alternative anhydrous and amorphous forms, as well as to amorphous microparticles of chlorothiazide sodium and potassium which were produced by spray drying and had a large specific surface area. The tablet hardness and tensile strength, porosity, and specific surface area of single-component, convex tablets prepared at different compression pressures were characterized. Results confirmed the complexity of the compressibility mechanisms. In general it may be concluded that factors such as solid-state form (crystalline vs amorphous), type of hydration (presence of interstitial molecules of water, dehydrates), or specific surface area of the material have a direct impact on the tabletability of the powder. It was observed that, for powders of the same solid state form, those with a larger specific surface area compacted well, and better than powders of a lower surface area, even at relatively low compression pressures. Compacts prepared at lower compression pressures from high surface area porous microparticles presented the shortest times to dissolve, when compared with compacts made of equivalent materials, which had to be compressed at higher compression pressures in order to obtain satisfactory compacts. Therefore, materials composed of nanoparticulate microparticles (NPMPs) may be considered as suitable for direct compaction and possibly for inclusion in tablet formulations as bulking agents, APIs, carriers, or binders due to their good compactibility performanceSolid State Pharmaceutical Cluster (SSPC), supported by Science Foundation Ireland under Grant No. 07/SRC/B1158

Molecular dynamics and physical stability of amorphous nimesulide drug and its binary drug-polymer systems

yesIn this paper we study the effectiveness of three well known polymers: inulin, Soluplus and PVP in stabilizing amorphous form of nimesulide (NMS) drug. The re-crystallization tendency of pure drug as well as measured drug-polymer systems were examined at isothermal conditions by using broadband dielectric spectroscopy (BDS), and at non-isothermal conditions by differential scanning calorimetry (DSC). Our investigation has shown that the crystallization half-life time of pure NMS at 328 K is equal to 33 minutes. We found that this time can be prolonged to 40 years after adding to NMS 20% of PVP polymer. This polymer proved to be the best NMS’s stabilizer, while the worst stabilization effect was found after adding the inulin to NMS. Additionally, our DSC, BDS and FTIR studies indicate that for suppression of NMS’s re-crystallization in NMS-PVP system, the two mechanisms are responsible: the polymeric steric hindrances as well as the antiplastization effect excerted by the excipient.The authors J.K., Z.W., K.G. and M.P., are grateful for the financial support received within the Project No. 2015/16/W/NZ7/00404 (SYMFONIA 3) from the National Science Centre, Poland. H.M. and L.T. are supported by Science Foundation Ireland under grant No. 12/RC/2275 (Synthesis and Solid State Pharmaceuticals Centre)