Inertial navigation/calibration/precise time and frequency capabilities

The Aerospace Guidance and Metrology Center was conceived in 1959 to be the US Air Force Inertial Navigation and Metrology Center. This paper will show the mission capabilities of the Inertial Navigation Maintenance Center and the Air Force Measurement and Standards Laboratory. Highlighted will be the precise time and frequency program developed by AGMC to support Air Force precise time and frequency requirements worldwide. A description of the past, present, and future precise time and frequency activities will be presented

Erosion-corrosion behaviour of Zirconia WC-6Co, WC-6Ni and SS316

The current study investigates a ceramic, two cermets and a metal under solid-liquid impingement with 3.5% NaCl and 150mg/l hydraulic fracturing sand at two extreme angles of impact, 90° and 20°. The materials tested were Zirconia, sintered WC-6Co, sintered WC-6Ni and SS316. Each material was exposed to a testing regime using re-circulating impinging jet apparatus with a velocity of 19m/s and one hour duration. The electrochemical properties of the materials were investigated in-situ through anodic and cathodic polarisation and application of cathodic protection. Post experimental analysis of the degraded surface was completed using Scanning Electron Microscopy (SEM) and Optical 3D Imaging. Zirconia exhibited a brittle response to erosion-corrosion testing with the mass loss at 90° being fifty times greater than the negligible mass loss at 20°. WC-6Co and WC-6Ni both outperformed SS316 under all solid-liquid impingement erosion-corrosion testing regimes. WC-6Ni exhibited slightly better erosion-corrosion resistance over WC-6Co at both 90° and 20°. SS316 had the best corrosion resistance and showed passivation during anodic polarisations in solid-liquid impingement conditions. The nickel binder increased the corrosion resistance of WC-6Ni over WC-6Co. Cathodic protection was successfully applied on sintered WC-6Co and SS316 isolating the key components of erosion-corrosion

Thrust and wing loading requirements for short haul aircraft constrained by engine noise and field length

Propulsion system and wing loading requirements are determined for a mechanical flap and an externally blown flap aircraft for various engine noise levels and two engine cycles. Both aircraft are sized to operate from a 914m (3000 ft) runway and perform the same mission. For each aircraft concept, propulsion system sizing is demonstrated for two different engine cycles - one having a fan pressure ratio of 1.5 and a bypass ratio of 9, and the other having a fan pressure ratio of 1.25 and a bypass ratio of 17.8. The results presented include the required thrust-to-weight ratio, wing loading, resulting gross weight, and direct operating costs, as functions of the engine noise level, for each combination of engine cycle and aircraft concept

A simple proof of the recent generalisations of Hawking's black hole topology theorem

A key result in four dimensional black hole physics, since the early 1970s, is Hawking's topology theorem asserting that the cross-sections of an "apparent horizon", separating the black hole region from the rest of the spacetime, are topologically two-spheres. Later, during the 1990s, by applying a variant of Hawking's argument, Gibbons and Woolgar could also show the existence of a genus dependent lower bound for the entropy of topological black holes with negative cosmological constant. Recently Hawking's black hole topology theorem, along with the results of Gibbons and Woolgar, has been generalised to the case of black holes in higher dimensions. Our aim here is to give a simple self-contained proof of these generalisations which also makes their range of applicability transparent.Comment: 12 pages, 1 figur

An X-Ray Jet from a White Dwarf - Detection of the Collimated Outflow from CH Cygni with Chandra

Most symbiotic stars consist of a white dwarf accreting material from the wind of a red giant. An increasing number of these objects have been found to produce jets. Analysis of archival Chandra data of the symbiotic system CH Cygni reveals faint extended emission to the south, aligned with the optical and radio jets seen in earlier HST and VLA observations. CH Cygni thus contains only the second known white dwarf with an X-ray jet, after R Aquarii. The X-rays from symbiotic-star jets appear to be produced when jet material is shock-heated following collision with surrounding gas, as with the outflows from some protostellar objects and bipolar planetary nebulae.Comment: 4 & a bit pages, 4 figures, accepted by ApJL; uses emulateapj.cls and revtex4. Minor changes following referees report, & shortened to meet page limi

Accreting millisecond X-ray pulsars: 10 years of INTEGRAL observations

During the last 10 years, INTEGRAL made a unique contribution to the study of accreting millisecond X-ray pulsars (AMXPs), discovering three of the 14 sources now known of this class. Besides increasing the number of known AMXPs, INTEGRAL also carried out observations of these objects above 20 keV, substantially advancing our understanding of their behaviour. We present here a review of all the AMXPs observed with INTEGRAL and discuss the physical interpretation of their behaviour in the X-ray domain. We focus in particular on the lightcurve profile during outburst, as well as the timing, spectral, and thermonuclear type-I X-ray bursts properties.Comment: 8 pages, 8 figures. Proceedings of "An INTEGRAL view of the high-energy sky (the first 10 years)" the 9th INTEGRAL Workshop, October 15-19, 2012, Paris, Franc

Altmetrics for the Information Professional: A Primer

Altmetrics, or alternative citation metrics, provide researchers and scholars with new ways to track influence across a wide range of media and platforms. From deciding what to read based on tweets, to enhancing scholarship with collaboration, altmetrics will exert more and more influence on the scholarly landscape. Awareness of altmetric tools, and the ways in which they can be used, will position information professionals at the forefront of this exciting new era in knowledge dissemination and assessment. As social media plays an ever increasing role in the communication of scholarship, the authors will discuss how altmetrics can be a valuable addition to the information professional’s tool kit. Beginning with a review of simple readership tools, and continuing with an overview of complex aggregator programs, the most promising and/or mature products will be described. Some of the many uses of altmetric data will be discussed, including the advantages of participating in large, diverse interest groups, informal reviews of formal documents, and the rapid (and arguably more complete) measure of research impact. The authors will further demonstrate how to use altmetrics to complement and enhance existing methods to provide readership advisory services for ourselves and our patrons, facilitate knowledge sharing, indicate effectiveness, and supply evidence for promotion and tenure

Indications for a slow rotator in the Rapid Burster from its thermonuclear bursting behaviour

We perform time-resolved spectroscopy of all the type I bursts from the Rapid Burster (MXB 1730-335) detected with the Rossi X-ray Timing Explorer. Type I bursts are detected at high accretion rates, up to \sim 45% of the Eddington luminosity. We find evidence that bursts lacking the canonical cooling in their time-resolved spectra are, none the less, thermonuclear in nature. The type I bursting rate keeps increasing with the persistent luminosity, well above the threshold at which it is known to abruptly drop in other bursting low-mass X-ray binaries. The only other known source in which the bursting rate keeps increasing over such a large range of mass accretion rates is the 11 Hz pulsar IGR J17480$-$2446. This may indicate a similarly slow spin for the neutron star in the Rapid Burster

Techno-economic evaluation of reducing shielding gas consumption in GMAW whilst maintaining weld quality

A new method of supplying shielding gases in an alternating manner has been developed to enhance the efficiency of conventional gas metal arc welding (GMAW). However, the available literature on this advanced joining process is very sparse and no cost evaluation has been reported to date. In simple terms, the new method involves discretely supplying two different shielding gases to the weld pool at predetermined frequencies which creates a dynamic action within the liquid pool. In order to assess the potential benefits of this new method from a technical and cost perspective, a comparison has been drawn between the standard shielding gas composition of Ar/20%CO2, which is commonly used in UK and European shipbuilding industries for carbon steels, and a range of four different frequencies alternating between Ar/20%CO2 and helium. The beneficial effects of supplying the weld shielding gases in an alternating manner were found to provide attractive benefits for the manufacturing community. For example, the present study showed that compared with conventional GMAW, a 17 per cent reduction in total welding cost was achieved in the case of the alternating gas method and savings associated with a reduction in the extent of post-weld straightening following plate distortion were also identified. Also, the mechanical properties of the alternating case highlighted some marginal improvements in strength and Charpy impact toughness which were attributed to a more refined weld microstructure

Non-Existence of Black Holes in Certain Λ<0\Lambda<0 Spacetimes

Assuming certain asymptotic conditions, we prove a general theorem on the non-existence of static regular (i.e., nondegenerate) black holes in spacetimes with a negative cosmological constant, given that the fundamental group of space is infinite. We use this to rule out the existence of regular negative mass AdS black holes with Ricci flat scri. For any mass, we also rule out a class of conformally compactifiable static black holes whose conformal infinity has positive scalar curvature and infinite fundamental group, subject to our asymptotic conditions. In a limited, but important, special case our result adds new support to the AdS/CFT inspired positive mass conjecture of Horowitz and Myers.Comment: 17 pages, Latex. Typos corrected, minor changes to the text. Accepted for publication in Classical and Quantum Gravit