Elimination of Clock Jitter Noise in Spaceborn Laser Interferometers

Space gravitational wave detectors employing laser interferometry between free-flying spacecraft differ in many ways from their laboratory counterparts. Among these differences is the fact that, in space, the end-masses will be moving relative to each other. This creates a problem by inducing a Doppler shift between the incoming and outgoing frequencies. The resulting beat frequency is so high that its phase cannot be read to sufficient accuracy when referenced to state-of-the-art space-qualified clocks. This is the problem that is addressed in this paper. We introduce a set of time-domain algorithms in which the effects of clock jitter are exactly canceled. The method employs the two-color laser approach that has been previously proposed, but avoids the singularities that arise in the previous frequency-domain algorithms. In addition, several practical aspects of the laser and clock noise cancellation schemes are addressed.Comment: 20 pages, 5 figure

Unequal arm space-borne gravitational wave detectors

Unlike ground-based interferometric gravitational wave detectors, large space-based systems will not be rigid structures. When the end-stations of the laser interferometer are freely flying spacecraft, the armlengths will change due to variations in the spacecraft positions along their orbital trajectories, so the precise equality of the arms that is required in a laboratory interferometer to cancel laser phase noise is not possible. However, using a method discovered by Tinto and Armstrong, a signal can be constructed in which laser phase noise exactly cancels out, even in an unequal arm interferometer. We examine the case where the ratio of the armlengths is a variable parameter, and compute the averaged gravitational wave transfer function as a function of that parameter. Example sensitivity curve calculations are presented for the expected design parameters of the proposed LISA interferometer, comparing it to a similar instrument with one arm shortened by a factor of 100, showing how the ratio of the armlengths will affect the overall sensitivity of the instrument.Comment: 14 pages, 7 figures, REVTeX

The Angular Resolution of Space-Based Gravitational Wave Detectors

Proposed space-based gravitational wave antennas involve satellites arrayed either in an equilateral triangle around the earth in the ecliptic plane (the ecliptic-plane option) or in an equilateral triangle orbiting the sun in such a way that the plane of the triangle is tilted at 60 degrees relative to the ecliptic (the precessing-plane option). In this paper, we explore the angular resolution of these two classes of detectors for two kinds of sources (essentially monochromatic compact binaries and coalescing massive-black-hole binaries) using time-domain expressions for the gravitational waveform that are accurate to 4/2 PN order. Our results display an interesting effect not previously reported in the literature, and underline the importance of including the higher-order PN terms in the waveform when predicting the angular resolution of ecliptic-plane detector arrays.Comment: 13 pages, 6 figures, submitted to Phys Rev D. The current version corrects an error in our original paper and adds some clarifying language. The error also required correction of the graphs now shown in Figures 3 through

The information content of gravitational wave harmonics in compact binary inspiral

The nonlinear aspect of gravitational wave generation that produces power at harmonics of the orbital frequency, above the fundamental quadrupole frequency, is examined to see what information about the source is contained in these higher harmonics. We use an order (4/2) post-Newtonian expansion of the gravitational wave waveform of a binary system to model the signal seen in a spaceborne gravitational wave detector such as the proposed LISA detector. Covariance studies are then performed to determine the ultimate accuracy to be expected when the parameters of the source are fit to the received signal. We find three areas where the higher harmonics contribute crucial information that breaks degeneracies in the model and allows otherwise badly-correlated parameters to be separated and determined. First, we find that the position of a coalescing massive black hole binary in an ecliptic plane detector, such as OMEGA, is well-determined with the help of these harmonics. Second, we find that the individual masses of the stars in a chirping neutron star binary can be separated because of the mass dependence of the harmonic contributions to the wave. Finally, we note that supermassive black hole binaries, whose frequencies are too low to be seen in the detector sensitivity window for long, may still have their masses, distances, and positions determined since the information content of the higher harmonics compensates for the information lost when the orbit-induced modulation of the signal does not last long enough to be apparent in the data.Comment: 13 pages, 5 figure

Sensitivity curves for spaceborne gravitational wave interferometers

To determine whether particular sources of gravitational radiation will be detectable by a specific gravitational wave detector, it is necessary to know the sensitivity limits of the instrument. These instrumental sensitivities are often depicted (after averaging over source position and polarization) by graphing the minimal values of the gravitational wave amplitude detectable by the instrument versus the frequency of the gravitational wave. This paper describes in detail how to compute such a sensitivity curve given a set of specifications for a spaceborne laser interferometer gravitational wave observatory. Minor errors in the prior literature are corrected, and the first (mostly) analytic calculation of the gravitational wave transfer function is presented. Example sensitivity curve calculations are presented for the proposed LISA interferometer. We find that previous treatments of LISA have underestimated its sensitivity by a factor of $\sqrt{3}$.Comment: 27 pages + 5 figures, REVTeX, accepted for publication in Phys Rev D; Update reflects referees comments, figure 3 clarified, figure 5 corrected for LISA baselin

I/O efficient bisimulation partitioning on very large directed acyclic graphs

In this paper we introduce the first efficient external-memory algorithm to compute the bisimilarity equivalence classes of a directed acyclic graph (DAG). DAGs are commonly used to model data in a wide variety of practical applications, ranging from XML documents and data provenance models, to web taxonomies and scientific workflows. In the study of efficient reasoning over massive graphs, the notion of node bisimilarity plays a central role. For example, grouping together bisimilar nodes in an XML data set is the first step in many sophisticated approaches to building indexing data structures for efficient XPath query evaluation. To date, however, only internal-memory bisimulation algorithms have been investigated. As the size of real-world DAG data sets often exceeds available main memory, storage in external memory becomes necessary. Hence, there is a practical need for an efficient approach to computing bisimulation in external memory. Our general algorithm has a worst-case IO-complexity of O(Sort(|N| + |E|)), where |N| and |E| are the numbers of nodes and edges, resp., in the data graph and Sort(n) is the number of accesses to external memory needed to sort an input of size n. We also study specializations of this algorithm to common variations of bisimulation for tree-structured XML data sets. We empirically verify efficient performance of the algorithms on graphs and XML documents having billions of nodes and edges, and find that the algorithms can process such graphs efficiently even when very limited internal memory is available. The proposed algorithms are simple enough for practical implementation and use, and open the door for further study of external-memory bisimulation algorithms. To this end, the full open-source C++ implementation has been made freely available

LATOR Covariance Analysis

We present results from a covariance study for the proposed Laser Astrometric Test of Relativity (LATOR) mission. This mission would send two laser-transmitter spacecraft behind the Sun and measure the relative gravitational light bending of their signals using a hundred-meter-baseline optical interferometer to be constructed on the International Space Station. We assume that each spacecraft is equipped with a $< 1.9 \times 10^{-13} \mathrm{m} \mathrm{s}^2 \mathrm{Hz}^{-1/2}$ drag-free system and assume approximately one year of data. We conclude that the observations allow a simultaneous determination of the orbit parameters of the spacecraft and of the Parametrized Post-Newtonian (PPN) parameter $\gamma$ with an uncertainty of $2.4 \times 10^{-9}$. We also find a $6 \times 10^{-9}$ determination of the solar quadrupole moment, $J_2$, as well as the first measurement of the second-order post-PPN parameter $\delta$ to an accuracy of about $10^{-3}$.Comment: 9 pages, 3 figures. first revision: minor changes to results. Second revision: additional discussion of orbit modelling and LATOR drag-free system requirement feasibility. Added references to tables I and V (which list PPN parameter uncertainties), removed word from sentence in Section III. 3rd revision: removed 2 incorrect text fragments (referring to impact parameter as distance of closest approach) and reference to upcoming publication of ref. 2, removed spurious gamma from eq. 1 - Last error is still in cqg published versio

LISA data analysis I: Doppler demodulation

The orbital motion of the Laser Interferometer Space Antenna (LISA) produces amplitude, phase and frequency modulation of a gravitational wave signal. The modulations have the effect of spreading a monochromatic gravitational wave signal across a range of frequencies. The modulations encode useful information about the source location and orientation, but they also have the deleterious affect of spreading a signal across a wide bandwidth, thereby reducing the strength of the signal relative to the instrument noise. We describe a simple method for removing the dominant, Doppler, component of the signal modulation. The demodulation reassembles the power from a monochromatic source into a narrow spike, and provides a quick way to determine the sky locations and frequencies of the brightest gravitational wave sources.Comment: 5 pages, 7 figures. References and new comments adde