A digitally controlled system for effecting and presenting a selected electrical resistance

A digitally controlled resistance generator is described, in which resistors having values selected according to an expression 2(sup N-1)(R), where N is equal to the number of terms in the expression, and R is equal to the lowest value of resistance, are electrically inserted into a resistive circuit in accordance with a parallel binary signal provided by an analog-to-digital converter or a programmable computer. This binary signal is coupled via optical isolators which, when activated by a logical 1, provides a negative potential to some or all of the gate inputs of the normally on field effect transistors which, when on, shorts out the associated resistor. This applied negative potential turns the field effect transistors off and electrically inserts the resistor coupled between the source terminal and the drain terminal of that field effect transistor into the resistive circuit between the terminals

Homo Datumicus : correcting the market for identity data

Effective digital identity systems offer great economic and civic potential. However, unlocking this potential requires dealing with social, behavioural, and structural challenges to efficient market formation. We propose that a marketplace for identity data can be more efficiently formed with an infrastructure that provides a more adequate representation of individuals online. This paper therefore introduces the ontological concept of Homo Datumicus: individuals as data subjects transformed by HAT Microservers, with the axiomatic computational capabilities to transact with their own data at scale. Adoption of this paradigm would lower the social risks of identity orientation, enable privacy preserving transactions by default and mitigate the risks of power imbalances in digital identity systems and markets

Substance Use Among Lesbian, Gay, and Bisexual Clients Entering Substance Abuse Treatment: Comparisons to Heterosexual Clients

Objective: This study evaluated whether sexual orientation-specific differences in substance use behaviors exist among adults entering substance abuse treatment. Method: Admissions records (July 2007–December 2009) were examined for treatment programs in San Francisco, California receiving government funding. Lesbian, gay, and bisexual (LGB) persons (n = 1,441) were compared to heterosexual persons (n = 11,770) separately by sex, examining primary problem substance of abuse, route of administration, age of first use, and frequency of use prior to treatment. Results: Regarding bisexual males, the only significant finding of note was greater prevalence of methamphetamine as the primary substance of abuse. When compared to heterosexual men, gay and bisexual men evidenced greater rates of primary problem methamphetamine use (44.5% and 21.8%, respectively, vs. 7.7%, adjusted odds ratios [ORs] 6.43 and 2.94), and there was lower primary heroin use among gay men (9.3% vs. 25.8%, OR 0.35). Among LGB individuals, race and ethnicity did not predict primary problem substance, except that among LGB men and women, a non-White race predicted cocaine use (OR 4.83 and 6.40, respectively), and among lesbian and bisexual women, Hispanic ethnicity predicted lower odds of primary cocaine use (OR 0.24). When compared to heterosexual men, gay men were more likely to smoke their primary problem substance (OR 1.61), first used this substance at an older age (M = 23.16 vs. M = 18.55, p \u3c .001), and used this substance fewer days prior to treatment (M = 8.75 vs. M = 11.41, p \u3c .001). There were no differences between heterosexual and lesbian or bisexual women. Conclusions: There were unique patterns of substance use for gay and bisexual men entering substance abuse treatment, but women did not evidence differences. Gay men evidenced unique factors that may reflect less severity of use when entering treatment including fewer days of use and a later age of initiation of their primary problem substances. The results underscore the importance of being sensitive to differences between gay, bisexual, and heterosexual males when considering substance use disorders

Biooptical variability in the Greenland Sea observed with the Multispectral Airborne Radiometer System (MARS)

A site-specific ocean color remote sensing algorithm was developed and used to convert Multispectral Airborne Radiometer System (MARS) spectral radiance measurements to chlorophyll-a concentration profiles along aircraft tracklines in the Greenland Sea. The analysis is described and the results given in graphical or tabular form. Section 2 describes the salient characteristics and history of development of the MARS instrument. Section 3 describes the analyses of MARS flight segments over consolidated sea ice, resulting in a set of altitude dependent ratios used (over water) to estimate radiance reflected by the surface and atmosphere from total radiance measured. Section 4 presents optically weighted pigment concentrations calculated from profile data, and spectral reflectances measured in situ from the top meter of the water column; this data was analyzed to develop an algorithm relating chlorophyll-a concentrations to the ratio of radiance reflectances at 441 and 550 nm (with a selection of coefficients dependent upon whether significant gelvin presence is implied by a low ratio of reflectances at 410 and 550 nm). Section 5 describes the scaling adjustments which were derived to reconcile the MARS upwelled radiance ratios at 410:550 nm and 441:550 nm to in situ reflectance ratios measured simultaneously on the surface. Section 6 graphically presents the locations of MARS data tracklines and positions of the surface monitoring R/V. Section 7 presents stick-plots of MARS tracklines selected to illustrate two-dimensional spatial variability within the box covered by each day's flight. Section 8 presents curves of chlorophyll-a concentration profiles derived from MARS data along survey tracklines. Significant results are summarized in Section 1

F-15 composite engine access door

This paper presents a summary of the successfully concluded phase 1 of the two-phase Design and Manufacture of Advanced Thermoplastic Structures (DMATS) program. It addresses the design, manufacture, and validation testing of a thermoplastic F-15E forward engine access door and includes lessons learned during the concurrent product and process design development phases of the program

Noncontact true temperature measurement, 2

A laser pyrometer was developed for acquiring the true temperature of a levitated sample. The reflectivity is measured by first expanding the laser beam to cover the entire cross-sectional surface of the diffuse target. The reflectivity calibration of this system is determined from the surface emissivity of a target with a blackbody cavity. The emissivity of the real target can then be calculated. The overall system constant is obtained by passively measuring the radiance of the blackbody cavity (emissivity = 1.0) at a known, arbitrary temperature. Since the photosensor used is highly linear over the entire operating temperature range, the true temperature of the target can then be computed. The latest results available from this on-going research indicate that true temperatures thus obtained are in very good quantitative agreement with thermocouple measured temperatures

RURAL ECONOMIC DEVELOPMENT FOR COMMUNITY SELF-RELIANCE

Community/Rural/Urban Development,

LANDSAT-4 and LANDSAT-5 Multispectral Scanner Coherent Noise Characterization and Removal

A technique is described for characterizing the coherent noise found in LANDSAT-4 and LANDSAT-5 MSS data and a companion technique for filtering out the coherent noise. The techniques are demonstrated on LANDSAT-4 and LANDSAT-5 MSS data sets, and explanations of the noise pattern are suggested in Appendix C. A cookbook procedure for characterizing and filtering the coherent noise using special NASA/Goddard IDIMS functions is included. Also presented are analysis results from the retrofitted LANDSAT-5 MSS sensor, which shows that the coherent noise has been substantially reduced

Noncontact temperature pattern measuring device

Laser pyrometer techniques are utilized to accurately image a true temperature distribution on a given target without touching the target and without knowing the localized emissivity of the target. The pyrometer utilizes a very high definition laser beam and photodetector, both having a very narrow focus. The pyrometer is mounted in a mechanism designed to permit the pyrometer to be aimed and focused at precise localized points on the target surface. The pyrometer is swept over the surface area to be imaged, temperature measurements being taken at each point of focus