MOCVD synthesis of compositionally tuned topological insulator nanowires

Device applications involving topological insulators (TIs) will require the development of scalable methods for fabricating TI samples with sub-micron dimensions, high quality surfaces, and controlled compositions. Here we use Bi-, Se-, and Te-bearing metalorganic precursors to synthesize TIs in the form of nanowires. Single crystal nanowires can be grown with compositions ranging from Bi2Se3 to Bi2Te3, including the ternary compound Bi2Te2Se. These high quality nanostructured TI compounds are suitable platforms for on-going searches for Majorana Fermions

Controlled MOCVD growth of Bi2Se3 topological insulator nanoribbons

Topological insulators are a new class of materials that support topologically protected electronic surface states. Potential applications of the surface states in low dissipation electronic devices have motivated efforts to create nanoscale samples with large surface-to-volume ratios and highly controlled stoichiometry. Se vacancies in Bi2Se3 give rise to bulk conduction, which masks the transport properties of the surface states. We have therefore developed a new route for the synthesis of topological insulator nanostructures using metalorganic chemical vapour deposition (MOCVD). MOCVD allows for control of the Se/Bi flux ratio during growth. With the aim of rational growth, we vary the Se/Bi flux ratio, growth time, and substrate temperature, and observe morphological changes which indicate a growth regime in which nanoribbon formation is limited by the Bi precursor mass-flow. MOCVD growth of Bi2Se3 nanostructures occurs via a distinct growth mechanism that is nucleated by gold nanoparticles at the base of the nanowire. By tuning the reaction conditions, we obtain either single-crystalline ribbons up to 10 microns long or thin micron-sized platelets.Comment: Related papers at http://pettagroup.princeton.ed

Large anomalous Hall effect in ferromagnetic insulator-topological insulator heterostructures

We demonstrate the van der Waals epitaxy of the topological insulator compound Bi2Te3 on the ferromagnetic insulator Cr2Ge2Te6. The layers are oriented with (001) of Bi2Te3 parallel to (001) of Cr2Ge2Te6 and (110) of Bi2Te3 parallel to (100) of Cr2Ge2Te6. Cross-sectional transmission electron microscopy indicates the formation of a sharp interface. At low temperatures, bilayers consisting of Bi2Te3 on Cr2Ge2Te6 exhibit a large anomalous Hall effect (AHE). Tilted field studies of the AHE indicate that the easy axis lies along the c-axis of the heterostructure, consistent with magnetization measurements in bulk Cr2Ge2Te6. The 61 K Curie temperature of Cr2Ge2Te6 and the use of near-stoichiometric materials may lead to the development of spintronic devices based on the AHE.Comment: Related papers at http://pettagroup.princeton.ed

Unexpected angiographic and visual findings after clipping of a carotid-ophthalmic aneurysm

A 56-year-old woman underwent surgery for a ruptured carotid-ophthalmic artery aneurysm. Intraoperative visual inspection confirmed that the ophthalmic artery was left intact. She had no light perception on the operated side right after surgery. Angiography one week after surgery confirmed exclusion of the aneurysm, no filling of the proximal portion of the ophthalmic artery, and a very faint filling of its distal orbital part. She gradually recovered from this deficit and 9 months after surgery she is capable of counting fingers. At this time angiography displayed filling of all the portions of the ophthalmic artery, absence of recruitment of collateral blood supply, and exclusion of the aneurysm as before. Surgical manipulation seems to either have induced vasospasm or thrombosis of the ophthalmic artery. Regression of vasospasm or secondary recanalization of the thrombus without development of collateral blood supply may account for the gradual improvement of vision. A risk of monocular blindness is associated with the surgical treatment of para-clinoid aneurysms. Nevertheless, when it occurs, a perspective of recovery may exist if certain etiologies are involved

Oxorhenium complexes bearing the water-soluble tris(pyrazol-1-yl)methanesulfonate, 1,3,5-triaza-7-phosphaadamantane, or related ligands, as catalysts for baeyer-villiger oxidation of ketones

New rhenium(VII or III) complexes [ReO3(PTA)(2)][ReO4] (1) (PTA = 1,3,5-triaza-7-phosphaadamantane), [ReO3(mPTA)][ReO4] (2) (mPTA = N-methyl-1,3,5-triaza-7-phosphaadamantane cation), [ReO3(HMT)(2)] [ReO4] (3) (HMT = hexamethylenetetramine), [ReO3(eta(2)-Tpm)(PTA)][ReO4] (4) [Tpm = hydrotris(pyrazol-1-yl)methane, HC(pz)(3), pz = pyrazolyl), [ReO3(Hpz)(HMT)][ReO4] (5) (Hpz = pyrazole), [ReO(Tpms)(HMT)] (6) [Tpms = tris(pyrazol-1-yl)methanesulfonate, O3SC(pz)(3)(-)] and [ReCl2{N2C(O)Ph} (PTA)(3)] (7) have been prepared from the Re(VII) oxide Re2O2 (1-6) or, in the case of 7, by ligand exchange from the benzoyldiazenido complex [ReCl2(N2C-(O)Ph}(Hpz)(PPh3)(2)], and characterized by IR and NMR spectroscopies, elemental analysis and electrochemical properties. Theoretical calculations at the density functional theory (DFT) level of theory indicated that the coordination of PTA to both Re(III) and Re(VII) centers by the P atom is preferable compared to the coordination by the N atom. This is interpreted in terms of the Re-PTA bond energy and hard-soft acid-base theory. The oxo-rhenium complexes 1-6 act as selective catalysts for the Baeyer-Villiger oxidation of cyclic and linear ketones (e.g., 2-methylcyclohexanone, 2-methylcyclopentanone, cyclohexanone, cyclopentanone, cyclobutanone, and 3,3-dimethyl-2-butanone or pinacolone) to the corresponding lactones or esters, in the presence of aqueous H2O2. The effects of a variety of factors are studied toward the optimization of the process

Influence of postharvest ultrasounds treatments on tomato (Solanum lycopersicum, cv. Zinac) quality and microbial load during storage

Whole tomato fruits were treated at ultrasonic power levels from 10% to 100%, and at a constant frequency of 45 kHz, for different times (1-19 min). A central composite rotatable design (CCRD) was applied to optimise ultrasonic treatments for tomato quality (colour, texture and total phenolic content (TPC)) maintenance. According to response surface analysis, the optimal treatment parameters were 55%_10 min, 80%_15 min and 100%_19 min. At these conditions, and especially at higher power levels, a maximum retention of colour and texture, as well as an increase of TPC and microbial reduction were obtained in comparison with untreated fruits during 15 storage days at 10 degrees C. The ultrasounds treatment was found to be effective in delaying colour development and texture losses, preserving sensorial quality of whole tomato, with increase of TPC and microbial load reduction. Moreover, this postharvest treatment can be used as an alternative for extending fresh fruits shelf-life.info:eu-repo/semantics/publishedVersio

Modelling colour and firmness changes of stored tomatoes (Lycopersicum esculentum L.) at different conditions

The effect of temperature and storage time on tomatoes (Lycopersicum esculentum L.) colour (a* and ºh) and firmness (maximum force) were analysed at 2º, 5º, 10º, 15º and 20 ºC. The development of these quality attributes followed a fractional kinetic model. The regression coefficient (R2) for the generated models were high, 0.94 for both colour parameters (a* and ºh) and 0.84 for firmness. A significant (p<0.05) increase and decrease for a* and maximum force, respectively, were observed during storage. This study can contribute for the understanding of the real effect of temperature and storage time on two important quality attributes of tomatoes, such as colour and firmness

Street-Based Female Adolescent Puerto Rican Sex Workers: Contextual Issues and Health Needs

Adolescent sex workers potentially have many health needs but are included rarely in health assessments; therefore, little is known about their needs or how to reach them. This study examines the motivations, social context, and health needs of street-based adolescent sex workers. The results show these youths are more likely to experience negative health outcomes, such as unintended pregnancies and sexually transmitted infections, when they are using drugs or are depressed. These findings suggest the need for comprehensive programming to include individual, interpersonal, and greater environmental interventions. Examples for reaching adolescent sex workers are discussed