MAPLE preparation and characterization of mixed arylenevinylene based oligomers:C60 layers

This paper presents some studies about the preparation by matrix-assisted pulsed laser evaporation (MAPLE) of mixed layers based on two arylenevinylene oligomers, 1,4-bis [4-(N,N′-diphenylamino)phenylvinyl] benzene (L78) and 3,3′-bis(N-hexylcarbazole)vinylbenzene (L13) as donor and buckminsterfullerene (C60) as acceptor, blended in three different weight ratios: 1:1, 1:2 and 1:3. The optical, morphological, structural and electrical properties of these mixed layers have been investigated emphasizing the effect of the layer composition and of the significant degree of disorder. I–V characteristics have revealed typically solar cell behaviour for the heterostructures prepared with mixed layers containing L78 (L13) and fullerene blended in a weight ratio of 1:2. The solar cell structure glass/ITO/L13:C60/Al has shown the best parameters

Oxide/Metal/Oxide Transparent Electrodes for Plastic Electronics and Plastic Solar Cells

Date du colloque : 08/2012International audienc

Organic flexible heterostructures with Al:ZnO transparent conductor electrode for photovoltaic applications

Date du colloque : 10/2014International audienc

Electrical and optical properties of Transparent Oxide/Metal/Oxide MultilayerFilms Deposited on Glass and PET substrates

Date du colloque : 10/2012International audienc

MAPLE prepared heterostructures with oligoazomethine: Fullerene derivative mixed layer for photovoltaic applications

Mixed layers of azomethine oligomers containing 2,5-diamino-3,4-dicyanothiophene as central unit and triphenylamine (LV5) or carbazol (LV4) at both ends as donor and fullerene derivative, [6,6]-phenyl-C61 butyric acid butyl ester ([C60]PCB-C4) as acceptor, have been prepared by Matrix Assisted Pulsed Laser Evaporation (MAPLE) on glass/ITO and Si substrates. The effect of weight ratio between donor and acceptor (1:1; 1:2) and solvent type (chloroform, dimethylsulphoxide) on the optical (UV–vis transmission/absorption, photoluminescence) and morphological properties of LV4 (LV5): [C60]PCB-C4 mixed layers has been evidenced. Dark and under illumination I–V characteristics of the heterostructures realized with these mixed layers sandwiched between ITO and Al electrodes have revealed a solar cell behavior for the heterostructures prepared with both LV4 and LV5 using chloroform as matrix solvent. The solar cell structure realized with oligomer LV5, glass/ITO/LV5: [C60]PCB-C4 (1:1) has shown the best parameters

On the properties of aluminium doped zinc oxide thin films deposited on plastic substrates from ceramic targets

We report on the deposition of Al doped ZnO (AZO) thin films on unheated polyethylene terephthalate (PET) substrates by pulsed laser deposition technique using a UV excimer laser and Al2O3:ZnO ceramic targets (1.5 and 2 wt% Al2O3). The deposited AZO films have been investigated by atomic force microscopy, scanning electron microscopy, X-ray diffraction, and optical spectrophotometry. Films present excellent optical and electrical properties (transmission in the visible range T > 85%; resistivity at room temperature rho = 1.3 x 10(-3) Omega cm) as electrodes for plastic solar cells. A good correlation was found between deposition conditions (laser fluence) and structural, morphological, optical and electrical propertie

Thin films of arylenevinylene oligomers prepared by MAPLE for applications in non-linear optics

This paper discusses two arylenevinylene oligomers with optical nonlinear properties. Their trans molecular structure was confirmed by Fourier Transform Infrared Spectroscopy and Nuclear Magnetic Resonance. Second Harmonic Generation and two-photon fluorescence have been observed on Matrix Assisted Pulsed Laser Evaporation-deposited thin films. We have seen two local maxima in UV–Vis spectra and a red shift of the photoluminescence peak for carbazole-based oligomer, which can be correlated with a higher conformational flexibility and with strong polarization interactions in the solid state. Scanning Electron Microscopy and Atomic Force Microscopy images have revealed a grainy morphology of the film deposited on titanium and a higher roughness for carbazole-based oligomer. Second harmonic measurements have shown nearly equal values of the second-order nonlinear optical coefficient for the triphenylamine and carbazole-based oligomers for Plaser < 100 mW. z-Scan and x-scan representations of the carbazole-based oligomer film have shown strong two-photon fluorescence intensity inside the sample confirming a volume process, and a strong second harmonic at the surface of the sample determined by the surface morphology