85,546 research outputs found
Semiconductor electrolyte photovoltaic energy converter
Feasibility and practicality of a solar cell consisting of a semiconductor surface in contact with an electrolyte are evaluated. Basic components and processes are detailed for photovoltaic energy conversion at the surface of an n-type semiconductor in contact with an electrolyte which is oxidizing to conduction band electrons. Characteristics of single crystal CdS, GaAs, CdSe, CdTe and thin film CdS in contact with aqueous and methanol based electrolytes are studied and open circuit voltages are measured from Mott-Schottky plots and open circuit photo voltages. Quantum efficiencies for short circuit photo currents of a CdS crystal and a 20 micrometer film are shown together with electrical and photovoltaic properties. Highest photon irradiances are observed with the GaAs cell
Demonstration test of burner liner strain measurements using resistance strain gages
A demonstration test of burner liner strain measurements using resistance strain gages as well as a feasibility test of an optical speckle technique for strain measurement are presented. The strain gage results are reported. Ten Kanthal A-1 wire strain gages were used for low cycle fatigue strain measurements to 950 K and .002 apparent strain on a JT12D burner can in a high pressure (10 atmospheres) burner test. The procedure for use of the strain gages involved extensive precalibration and postcalibration to correct for cooling rate dependence, drift, and temperature effects. Results were repeatable within + or - .0002 to .0006 strain, with best results during fast decels from 950 K. The results agreed with analytical prediction based on an axisymmetric burner model, and results indicated a non-uniform circumferential distribution of axial strain, suggesting temperature streaking
ATM-CMG control system stability
Stability analyses and simulation data and results are presented for an initial Control Moment Gyroscope system proposed for the Apollo Telescope Mount cluster (later named Skylab) using momentum vector feedback. A compensation filtering technique is presented which significantly improved analytical and simulation performance of the system. This technique is quite similar to the complementary filtering technique and represents an early NASA application
Ground state projection of quantum spin systems in the valence bond basis
A Monte Carlo method for quantum spin systems is formulated in the basis of
valence bond (singlet pair) states. The non-orthogonality of this basis allows
for an efficient importance-sampled projection of the ground state out of an
arbitrary state. The method provides access to resonating valence-bond physics,
enables a direct improved estimator for the singlet-triplet gap, and extends
the class of models that can be studied without negative-sign problems. As a
demonstration, the valence bond distribution in the ground state of the 2D
Heisenberg antiferromagnet is calculated. Generalizations of the method to
fermion systems are also discussed.Comment: 4+ pages, accepted for publication in Phys. Rev. Let
Computation of three-dimensional nozzle-exhaust flow fields with the GIM code
A methodology is introduced for constructing numerical analogs of the partial differential equations of continuum mechanics. A general formulation is provided which permits classical finite element and many of the finite difference methods to be derived directly. The approach, termed the General Interpolants Method (GIM), can combined the best features of finite element and finite difference methods. A quasi-variational procedure is used to formulate the element equations, to introduce boundary conditions into the method and to provide a natural assembly sequence. A derivation is given in terms of general interpolation functions from this procedure. Example computations for transonic and supersonic flows in two and three dimensions are given to illustrate the utility of GIM. A three-dimensional nozzle-exhaust flow field is solved including interaction with the freestream and a coupled treatment of the shear layer. Potential applications of the GIM code to a variety of computational fluid dynamics problems is then discussed in terms of existing capability or by extension of the methodology
High temperature strain gage technology for hypersonic aircraft development applications
An experimental evaluation of Pd 13 percent Cr and of BCL-3 alloy wire strain gages was conducted on IN100 and Cu 0.15 percent Zr alloy substrates. Testing included apparent strain, drift, gage factor, and creep. Maximum test temperature was 1144 K (1600 F). The PdCr gages incorporated Pt temperature compensation elements. The PdCr gages were found to have good resistance stability below 866 K (1100 F). The BCL 3 gages were found to have good resistance stability above 800 K (981 F), but high drift around 700 K (800 F)
Finite difference grid generation by multivariate blending function interpolation
The General Interpolants Method (GIM) code which solves the multidimensional Navier-Stokes equations for arbitrary geometric domains is described. The geometry module in the GIM code generates two and three dimensional grids over specified flow regimes, establishes boundary condition information and computes finite difference analogs for use in the GIM code numerical solution module. The technique can be classified as an algebraic equation approach. The geometry package uses multivariate blending function interpolation of vector-values functions which define the shapes of the edges and surfaces bounding the flow domain. By employing blending functions which conform to the cardinality conditions the flow domain may be mapped onto a unit square (2-D) or unit cube (3-D), thus producing an intrinsic coordinate system for the region of interest. The intrinsic coordinate system facilitates grid spacing control to allow for optimum distribution of nodes in the flow domain
Influence of pressure driven secondary flows on the behavior of turbofan forced mixers
A finite difference procedure was developed to analyze the three dimensional subsonic turbulent flows in turbofan forced mixer nozzles. The method is based on a decomposition of the velocity field into primary and secondary flow components which are determined by solution of the equations governing primary momentum, secondary vorticity, thermal energy, and continuity. Experimentally, a strong secondary flow pattern was identified which is associated with the radial inflow and outflow characteristics of the core and fan streams and forms a very strong vortex system aligned with the radial interface between the core and fan regions. A procedure was developed to generate a similar generic secondary flow pattern in terms of two constants representing the average radial outflow or inflow in the core and fan streams as a percentage of the local streamwise velocity. This description of the initial secondary flow gave excellent agreement with experimental data. By identifying the nature of large scale secondary flow structure and associating it with characteristic mixer nozzle behavior, it is felt that the cause and effect relationship between lobe design and nozzle performance can be understood
Effective Hamiltonian for fermions in an optical lattice across Feshbach resonance
We derive the Hamiltonian for cold fermionic atoms in an optical lattice
across a broad Feshbach resonance, taking into account of both multiband
occupations and neighboring-site collisions. Under typical configurations, the
resulting Hamiltonian can be dramatically simplified to an effective
single-band model, which describes a new type of resonance between the local
dressed molecules and the valence bond states of fermionic atoms at neighboring
sites. On different sides of such a resonance, the effective Hamiltonian is
reduced to either a t-J model for the fermionic atoms or an XXZ model for the
dressed molecules. The parameters in these models are experimentally tunable in
the full range, which allows for observation of various phase transitions.Comment: 5 pages, 2 figure
Absence of classical and quantum mixing
It is shown, under mild assumptions, that classical degrees of freedom
dynamically coupled to quantum ones do not inherit their quantum fluctuations.
It is further shown that, if the assumptions are strengthen by imposing the
existence of a canonical structure, only purely classical or purely quantum
dynamics are allowed.Comment: REVTeX, 4 page
- …