32 research outputs found
A comparative study of triaxial and uniaxial magnetic shields made out of YBCO coated conductors
Comparison of the clonogenic survival of A549 non-small cell lung adenocarcinoma cells after irradiation with low-dose-rate beta particles and high-dose-rate X-rays
Purpose: Lung cancer is the leading cause of cancer-related death. Among the new modalities to treat cancer, internal radiotherapy seems to be very promising. However, the achievable dose-rate is two orders of magnitude lower than the one used in conventional external radiotherapy, and data has to be collected to evaluate the cell response to highlight the potential effectiveness of low-dose-rate beta particles irradiation. This work investigates the phosphorus beta irradiation ( P) dose response on the clonogenicity of human A549 non-small cell lung adenocarcinoma cells and compares it to high-dose-rate X-irradiations results. Materials and methods: Cell survival was evaluated by a colony forming assay eight days after low-dose-rate P beta irradiations (0.8 Gy/h) and high-dose-rate X-ray irradiations (0.855 Gy/min). Results: Survival curves were obtained for both types of irradiations, and showed hyper-radiosensitivity at very low doses. Radiosensitivity parameters were obtained by using the linear-quadratic and induced-repair models. Conclusions: Comparison with high-dose-rate X-rays shows a similar surviving fraction, confirming the effectiveness of beta particles for tumor sterilization. © 2012 Informa UK, Ltd
Influence of soft ferromagnetic sections on the magnetic flux density profile of a large grain, bulk Y-Ba-Cu-O superconductor
Bulk, high temperature superconductors have significant potential for use as powerful permanent magnets in a variety of practical applications due to their ability to trap record magnetic fields. In this paper, soft ferromagnetic sections are combined with a bulk, large grain Y-Ba-Cu-O (YBCO) high temperature superconductor to form superconductor/ferromagnet (SC/FM) hybrid structures. We study how the ferromagnetic sections influence the shape of the profile of the trapped magnetic induction at the surface of each structure and report the surface magnetic flux density measured by Hall probe mapping. These configurations have been modelled using a 2D axisymmetric finite element method based on the H-formulation and the results show excellent qualitative and quantitative agreement with the experimental measurements. The model has also been used to study the magnetic flux distribution and predict the behaviour for other constitutive laws and geometries. The results show that the ferromagnetic material acts as a magnetic shield, but the flux density and its gradient are enhanced on the face opposite to the ferromagnet. The thickness and saturation magnetization of the ferromagnetic material are important and a characteristic ferromagnet thickness d* is derived: below d*, saturation of the ferromagnet occurs, and above d*, a weak thickness-dependence is observed. The influence of the ferromagnet is observed even if its saturation magnetization is lower than the trapped flux density of the superconductor. Conversely, thin ferromagnetic discs can be driven to full saturation even though the outer magnetic field is much smaller than their saturation magnetization.This work is part of an Action de Recherches Concertées grant from the Ministry of Higher Education through the Research Council of the University of Liege (ARC 11/16-03). Dr Mark Ainslie would like to acknowledge the support of a Royal Academy of Engineering Research Fellowship.This is the author accepted manuscript. The final version is available from IOP via http://dx.doi.org/10.1088/0953-2048/28/9/09500
Influence of the nucleus area distribution on the survival fraction after charged particles broad beam irradiation
Influence of soft ferromagnetic sections on the magnetic flux density profile of a large grain, bulk Y-Ba-Cu-O superconductor
Bulk, high temperature superconductors have significant potential for use as powerful permanent magnets in a variety of practical applications due to their ability to trap record magnetic fields. In this paper, soft ferromagnetic sections are combined with a bulk, large grain Y-Ba-Cu-O high temperature superconductor to form superconductor/ferromagnet hybrid structures. We study how the ferromagnetic sections influence the shape of the profile of the trapped magnetic induction at the surface of each structure and report the surface magnetic flux density measured by Hall probe mapping. These configurations have been modelled using a 2D axisymmetric finite element method based on the H -formulation and the results show excellent qualitative and quantitative agreement with the experimental measurements. The model has also been used to study the magnetic flux distribution and predict the behaviour for other constitutive laws and geometries. The results show that the ferromagnetic material acts as a magnetic shield, but the flux density and its gradient are enhanced on the face opposite to the ferromagnet. The thickness and saturation magnetization of the ferromagnetic material are important and a characteristic ferromagnet thickness d∗ is derived: below d∗, saturation of the ferromagnet occurs, and above d∗, a weak thickness-dependence is observed. The influence of the ferromagnet is observed even if its saturation magnetization is lower than the trapped flux density of the superconductor. Conversely, thin ferromagnetic discs can be driven to full saturation even though the outer magnetic field is much smaller than their saturation magnetization
Evolutionary erosion of yeast sex chromosomes by mating-type switching accidents
We investigate yeast sex chromosome evolution by comparing genome sequences from 16 species in the family Saccharomycetaceae, including data from genera Tetrapisispora, Kazachstania, Naumovozyma, and Torulaspora. We show that although most yeast species contain a mating-type (MAT) locus and silent HML and HMR loci structurally analogous to those of Saccharomyces cerevisiae, their detailed organization is highly variable and indicates that the MAT locus is a deletion hotspot. Over evolutionary time, chromosomal genes located immediately beside MAT have continually been deleted, truncated, or transposed to other places in the genome in a process that is gradually shortening the distance between MAT and HML. Each time a gene beside MAT is removed by deletion or transposition, the next gene on the chromosome is brought into proximity with MAT and is in turn put at risk for removal. This process has also continually replaced the triplicated sequence regions, called Z and X, that allow HML and HMR to be used as templates for DNA repair at MAT during mating-type switching. We propose that the deletion and transposition events are caused by evolutionary accidents during mating-type switching, combined with natural selection to keep MAT and HML on the same chromosome. The rate of deletion accelerated greatly after whole-genome duplication, probably because genes were redundant and could be deleted without requiring transposition. We suggest that, despite its mutational cost, switching confers an evolutionary benefit by providing a way for an isolated germinating spore to reform spores if the environment is too poor
Influence of the nucleus area distribution on the survival fraction after charged particles broad beam irradiation Running Head: Influence of nucleus area distribution on survival fraction
Abstract It is well known that broad beam irradiation with heavy ions leads to variation of the number of hit (s) received by each cell as the distribution of particles follows the Poisson statistics. Although the nucleus area will determine the number of hit(s) received for a given dose, the variation in the nucleus area amongst the irradiated cell population is generally not considered. In this work, we investigate the effect of the nucleus area distribution on the survival fraction. More specifically, this work aims to explain the deviation or tail which might be observed in the survival fraction at high irradiation doses. For this purpose, the nucleus area distribution was added to the beam Poisson statistics and the LinearQuadratic model in order to fit the experimental data generated by broad beam irradiation with high energy heavy ions. As shown in this study, the nucleus size variation and the associated Poisson statistics can lead to an upward bending in the survival fraction after broad beam irradiation. The influence of the distribution parameters (mean area and standard deviation) were studied using a normal distribution. The influence of the Linear-Quadratic model parameters ( and ) is also shown. Finally, the model proposed here was successfully tested to the survival fraction of LN18 cells irradiated with a 85 keV/µm carbon ion broad beam for which the distribution in the area of the nucleus had been determined
Influence of the nucleus area distribution on the survival fraction after charged particles broad beam irradiation.
It is well known that broad beam irradiation with heavy ions leads to variation in the number of hit(s) received by each cell as the distribution of particles follows the Poisson statistics. Although the nucleus area will determine the number of hit(s) received for a given dose, variation amongst its irradiated cell population is generally not considered. In this work, we investigate the effect of the nucleus area\u27s distribution on the survival fraction. More specifically, this work aims to explain the deviation, or tail, which might be observed in the survival fraction at high irradiation doses. For this purpose, the nucleus area distribution was added to the beam Poisson statistics and the Linear-Quadratic model in order to fit the experimental data. As shown in this study, nucleus size variation, and the associated Poisson statistics, can lead to an upward survival trend after broad beam irradiation. The influence of the distribution parameters (mean area and standard deviation) was studied using a normal distribution, along with the Linear-Quadratic model parameters (α and β). Finally, the model proposed here was successfully tested to the survival fraction of LN18 cells irradiated with a 85 keV µm(- 1) carbon ion broad beam for which the distribution in the area of the nucleus had been determined
Clade- and species-specific features of genome evolution in the Saccharomycetaceae
International audienceMany aspects of the genomes of yeast species in the family Saccharomycetaceae have been well conserved during evolution. They have similar genome sizes, genome contents, and extensive collinearity of gene order along chromosomes. Gene functions can often be inferred reliably by using information from Saccharomyces cerevisiae. Beyond this conservative picture however, there are many instances where a species or a clade diverges substantially from the S. cerevisiae paradigm-for example, by the amplification of a gene family, or by the absence of a biochemical pathway or a protein complex. Here, we review clade-specific features, focusing on genomes sequenced in our laboratory from the post-WGD genera Naumovozyma, Kazachstania and Tetrapisispora, and from the non-WGD species Torulaspora delbrueckii. Examples include the loss of the pathway for histidine synthesis in the cockroach-associated species Tetrapisispora blattae; the presence of a large telomeric GAL gene cluster in To. delbrueckii; losses of the dynein and dynactin complexes in several independent yeast lineages; fragmentation of the MAT locus and loss of the HO gene in Kazachstania africana; and the patchy phylogenetic distribution of RNAi pathway components