A new model for the double well potential

A new model for the double well potential is presented in the paper. In the new potential, the exchanging rate could be easily calculated by the perturbation method in supersymmetric quantum mechanics. It gives good results whether the barrier is high or sallow. The new model have many merits and may be used in the double well problem.Comment: 3pages, 3figure

Influence of adding multiwalled carbon nanotubes on the adhesive strength of composite epoxy/sol–gel materials

The tensile shear strength of a composite epoxy/sol–gel system modified with different ratios of multiwall carbon nanotubes (MWCNTs) was evaluated using a mechanical testing machine. The experimental results showed that the shear strength increased when lower than ~0.07 wt% of MWCNTs were added in the composite solution. The increase of the shear strength was attributed to both the mechanical load transfer from the matrix to the MWCNTs and the high specific surface area of this material that increased the degree of crosslinking with other inorganic fillers in the formulation. However, a decrease in the adhesive shear strength was observed after more than ~0.07 wt% MWCNTs were added to the composite. The reason for this may be related to the high concentration of MWCNTs within the matrix leading to excessively high viscosity, dewetting of the substrate surfaces, and reduced bonding of MWCNTs with the matrix, thereby limiting the strength. SEM observation of the fracture surfaces for composite epoxy/sol–gel adhesive materials with 0.01 wt% MWCNTs showed a mixed interfacial/cohesive fracture mode. This fracture mode indicated strong links at the adhesive/substrate interface, and interaction between CNTs and the matrix was achieved; therefore, adhesion performance of the composite epoxy/sol–gel material to the substrate was improved. An increase of a strong peak related to the C–O bond at ~1733 cm-1 in the FTIR spectra was observed. This peak represented crosslinking between the CNT surface and the organosilica nanoparticles in the MWCNTs-doped composite adhesive. Raman spectroscopy was also used to identify MWCNTs within the adhesive material. The Raman spectra exhibit peaks at ~1275 cm-1 and in the range of ~1549–1590 cm-1. The former is the graphite G-band, while the latter is the diamond D-band. The D-band and G-band represent the C–C single bond and C=C double bond in carbon nanotubes, respectively

Methodology and experiences of rapid advice guideline development for children with COVID-19: responding to the COVID-19 outbreak quickly and efficiently

BACKGROUND: Rapid Advice Guidelines (RAG) provide decision makers with guidance to respond to public health emergencies by developing evidence-based recommendations in a short period of time with a scientific and standardized approach. However, the experience from the development process of a RAG has so far not been systematically summarized. Therefore, our working group will take the experience of the development of the RAG for children with COVID-19 as an example to systematically explore the methodology, advantages, and challenges in the development of the RAG. We shall propose suggestions and reflections for future research, in order to provide a more detailed reference for future development of RAGs. RESULT: The development of the RAG by a group of 67 researchers from 11 countries took 50 days from the official commencement of the work (January 28, 2020) to submission (March 17, 2020). A total of 21 meetings were held with a total duration of 48 h (average 2.3 h per meeting) and an average of 16.5 participants attending. Only two of the ten recommendations were fully supported by direct evidence for COVID-19, three recommendations were supported by indirect evidence only, and the proportion of COVID-19 studies among the body of evidence in the remaining five recommendations ranged between 10 and 83%. Six of the ten recommendations used COVID-19 preprints as evidence support, and up to 50% of the studies with direct evidence on COVID-19 were preprints. CONCLUSIONS: In order to respond to public health emergencies, the development of RAG also requires a clear and transparent formulation process, usually using a large amount of indirect and non-peer-reviewed evidence to support the formation of recommendations. Strict following of the WHO RAG handbook does not only enhance the transparency and clarity of the guideline, but also can speed up the guideline development process, thereby saving time and labor costs

Methodology and experiences of rapid advice guideline development for children with COVID-19: responding to the COVID-19 outbreak quickly and efficiently.

BACKGROUND Rapid Advice Guidelines (RAG) provide decision makers with guidance to respond to public health emergencies by developing evidence-based recommendations in a short period of time with a scientific and standardized approach. However, the experience from the development process of a RAG has so far not been systematically summarized. Therefore, our working group will take the experience of the development of the RAG for children with COVID-19 as an example to systematically explore the methodology, advantages, and challenges in the development of the RAG. We shall propose suggestions and reflections for future research, in order to provide a more detailed reference for future development of RAGs. RESULT The development of the RAG by a group of 67 researchers from 11 countries took 50 days from the official commencement of the work (January 28, 2020) to submission (March 17, 2020). A total of 21 meetings were held with a total duration of 48 h (average 2.3 h per meeting) and an average of 16.5 participants attending. Only two of the ten recommendations were fully supported by direct evidence for COVID-19, three recommendations were supported by indirect evidence only, and the proportion of COVID-19 studies among the body of evidence in the remaining five recommendations ranged between 10 and 83%. Six of the ten recommendations used COVID-19 preprints as evidence support, and up to 50% of the studies with direct evidence on COVID-19 were preprints. CONCLUSIONS In order to respond to public health emergencies, the development of RAG also requires a clear and transparent formulation process, usually using a large amount of indirect and non-peer-reviewed evidence to support the formation of recommendations. Strict following of the WHO RAG handbook does not only enhance the transparency and clarity of the guideline, but also can speed up the guideline development process, thereby saving time and labor costs

Status of Muon Collider Research and Development and Future Plans

The status of the research on muon colliders is discussed and plans are outlined for future theoretical and experimental studies. Besides continued work on the parameters of a 3-4 and 0.5 TeV center-of-mass (CoM) energy collider, many studies are now concentrating on a machine near 0.1 TeV (CoM) that could be a factory for the s-channel production of Higgs particles. We discuss the research on the various components in such muon colliders, starting from the proton accelerator needed to generate pions from a heavy-Z target and proceeding through the phase rotation and decay ($\pi \to \mu \nu_{\mu}$) channel, muon cooling, acceleration, storage in a collider ring and the collider detector. We also present theoretical and experimental R & D plans for the next several years that should lead to a better understanding of the design and feasibility issues for all of the components. This report is an update of the progress on the R & D since the Feasibility Study of Muon Colliders presented at the Snowmass'96 Workshop [R. B. Palmer, A. Sessler and A. Tollestrup, Proceedings of the 1996 DPF/DPB Summer Study on High-Energy Physics (Stanford Linear Accelerator Center, Menlo Park, CA, 1997)].Comment: 95 pages, 75 figures. Submitted to Physical Review Special Topics, Accelerators and Beam

A newly recorded Rickettsia of the Torix group is a recent intruder and an endosymbiont in the whitefly Bemisia tabaci

The bacterium Rickettsia is found widely in phytophagous insects and often exerts profound effects on the phenotype and fitness of its hosts. Here, we decrypt a new, independent, phylogenetically ancient Torix Rickettsia endosymbiont found constantly in a laboratory line of an economically important insect Asia II 7, a putative species of the Bemisia tabaci whitefly complex (Hemiptera: Aleyrodidae), and occasionally in field whitefly populations. This new Rickettsia distributes throughout the body of its whitefly host. Genetically, compared to Rickettsia_bellii_MEAM1 found earlier in whiteflies, the new Rickettsia species has more gene families and pathways, which may be important factors in shaping specific symbiotic relationships. We propose the name ‘Candidatus Rickettsia_Torix_Bemisia_tabaci (RiTBt)’ for this new endosymbiont associated with whiteflies. Comparative genomic analyses indicate that RiTBi may be a relatively recent intruder in whiteflies given its low abundance in the field and relatively larger genome compared to Rickettsia_bellii_MEAM1

Genomewide association study of leprosy.

BACKGROUND: The narrow host range of Mycobacterium leprae and the fact that it is refractory to growth in culture has limited research on and the biologic understanding of leprosy. Host genetic factors are thought to influence susceptibility to infection as well as disease progression. METHODS: We performed a two-stage genomewide association study by genotyping 706 patients and 1225 controls using the Human610-Quad BeadChip (Illumina). We then tested three independent replication sets for an association between the presence of leprosy and 93 single-nucleotide polymorphisms (SNPs) that were most strongly associated with the disease in the genomewide association study. Together, these replication sets comprised 3254 patients and 5955 controls. We also carried out tests of heterogeneity of the associations (or lack thereof) between these 93 SNPs and disease, stratified according to clinical subtype (multibacillary vs. paucibacillary). RESULTS: We observed a significant association (P<1.00x10(-10)) between SNPs in the genes CCDC122, C13orf31, NOD2, TNFSF15, HLA-DR, and RIPK2 and a trend toward an association (P=5.10x10(-5)) with a SNP in LRRK2. The associations between the SNPs in C13orf31, LRRK2, NOD2, and RIPK2 and multibacillary leprosy were stronger than the associations between these SNPs and paucibacillary leprosy. CONCLUSIONS: Variants of genes in the NOD2-mediated signaling pathway (which regulates the innate immune response) are associated with susceptibility to infection with M. leprae

Nucleus-targeted Dmp1 transgene fails to rescue dental defects in Dmp1 null mice

Dentin matrix protein 1 (DMP1) is essential to odontogenesis. Its mutations in human subjects lead to dental problems such as dental deformities, hypomineralization and periodontal impairment. Primarily, DMP1 is considered as an extracellular matrix protein that promotes hydroxyapatite formation and activates intracellular signaling pathway via interacting with αvβ3 integrin. Recent in vitro studies suggested that DMP1 might also act as a transcription factor. In this study, we examined whether full-length DMP1 could function as a transcription factor in the nucleus and regulate odontogenesis in vivo. We first demonstrated that a patient with the DMP1 M1V mutation, which presumably causes a loss of the secretory DMP1 but does not affect the nuclear translocation of DMP1, shows a typical rachitic tooth defect. Furthermore, we generated transgenic mice expressing (NLS)DMP1, in which the endoplasmic reticulum (ER) entry signal sequence of DMP1 was replaced by a nuclear localization signal (NLS) sequence, under the control of a 3.6 kb rat type I collagen promoter plus a 1.6 kb intron 1. We then crossbred the (NLS)DMP1 transgenic mice with Dmp1 null mice to express the (NLS)DMP1 in Dmp1-deficient genetic background. Although immunohistochemistry demonstrated that (NLS)DMP1 was localized in the nuclei of the preodontoblasts and odontoblasts, the histological, morphological and biochemical analyses showed that it failed to rescue the dental and periodontal defects as well as the delayed tooth eruption in Dmp1 null mice. These data suggest that the full-length DMP1 plays no apparent role in the nucleus during odontogenesis