Durability of biodegradable polymers for the conservation of cultural heritage

The use of polymers for conservation of cultural heritage is related to the possibility to slow down or stop natural deterioration which, in many cases, corresponds to stopping the entrance of liquid water and to favor spontaneous water vapor removal. Unfortunately, hydrophobicity is generally favored by surface roughness and thus competitive with transparency. It is therefore important to find an optimal balance hydrophobicity, transparency and durability (especially to photooxidation). However, polymers typically used for applications in this field come from non-renewable resources and are not biodegradable. In this work, the mechanical, structural, and optical properties of PLA, PBAT, and a PBAT/PLA blends, as well as surface properties and water vapor permeability, were investigated before and after exposure to UV irradiation, in order to evaluate their durability and suitability for conservation of cultural heritage

The nutraceuticals : a new therapeutic strategy in the management of digestive and respiratory disorders

Nutraceuticals represents an intriguing challenge in clinical practice. They are currently used worldwide in all fields of Medicine. The present Supplement reports two Italian surveys concerning a probiotic mixture employed in patients with chronic intestinal disorders and a Medical Device used in patients with upper respiratory diseases. These surveys were conducted on a group of Italian gastroenterologists and on a group of Italian otolaryngologists respectively. Both surveys demonstrated that these compounds may represent a useful therapeutic option in clinical practice

Investigation on the properties and on the photo-oxidation behaviour of polypropylene/fumed silica nanocomposites

This work investigates the effects of very small amounts of fumed silica on the morphology and on the rheological and mechanical behaviour of polypropylene nanocomposites and on their photo-oxidation behaviour. Polypropylene nanocomposites were prepared using a twin-screw corotating extruder with 0, 1 and 2 wt/wt% of SiO2. Morphological, mechanical, thermomechanical and rheological properties were examined. It was found that the viscosity of the matrix is reduced by the presence of the silica nanoparticles, suggesting a poor adhesion between the two phases and probably some lubricating effect. On the contrary, the mechanical and, in particular, the thermomechanical properties of the matrix are considerably improved by the presence of the silica. In particular, elastic modulus and tensile strength increases remarkably, and this effect becomes more and more remarkable with an increasing temperature. As for the photo-oxidation behaviour, the presence of silica improves the photostability of the polypropylene matrix. This effect has been attributed to both the barrier to the oxygen and to the absorbance of the UV radiation from the silica nanoparticles. Finally, no significant effect of the silica nanoparticles has been put in evidence on the crystallisation behaviour of the polypropylene. As for the effect of the silica content, the difference in the properties of the two nanocomposites is relatively small and all the measured properties depend much less than linearly with its amount. This has been correlated with the reaggregation of the nanoparticles that, having a larger size, decrease the contact area between the matrix and the filler

Toward the Decarbonization of Plastic: Monopolymer Blend of Virgin and Recycled Bio-Based, Biodegradable Polymer

Decarbonization of plastics is based on two main pillars: bio-based polymers and recycling. Mechanical recycling of biodegradable polymers could improve the social, economic and environmental impact of the use of these materials. In this regard, the aim of this study was to investigate whether concentrations of the same recycled biopolymer could significantly affect the rheological and mechanical properties of biodegradable monopolymer blends. Monopolymer blends are blends made of the same polymers, virgin and recycled. A sample of commercially available biodegradable blend was reprocessed in a single-screw extruder until two extrusion cycles were completed. These samples were exposed to grinding and melt reprocessed with 75% and 90% of the same virgin polymer. The blends were characterized by tensile tests and rheological tests. The results obtained showed that while multiple extrusions affected the mechanical and rheological properties of the polymer, the concentration of the reprocessed material present in the blends only very slightly affected the properties of the virgin material. In addition, the experimentally observed trends were accurately predicted by the additive model adopted

Comparative investigation on the soil burial degradation behaviour of polymer films for agriculture before and after photo-oxidation

Polymer films based on biodegradable polymers, polyethylene (PE) and modified PE with oxo-degradable additive were prepared by film blowing. Carbon black (1%) was added to all the films. Commercial biodegradable Ecovio\uae and Mater-Bi\uae samples were used. Mechanical properties, soil burial degradation and surface wettability were investigated, before and after UV irradiation. Chemical modifications induced by UV and soil degradation, or a synergic effect, were highlighted by Attenuated Total Reflection-Fourier Transform Infra-Red (ATR-FTIR). Photo-oxidized film samples with an elongation at break equal to 50% and 0.5 the initial value were selected for the soil burial degradation test at 30 \ub0C. Weight loss measurements were used to follow biodegradation in soil. Predictably, the degradation in soil was higher for biodegradable polymer-based films than for the PE-based ones. UV irradiation increased surface wettability and encouraged the disintegration in soil of all the samples. In fact, photo-oxidation produced a molar mass reduction and hydrophilic end groups, thus increasing surface erosion and weight loss. This paper not only supplies new criteria to evaluate the performance of biodegradable films in agriculture, before and after lifetime, but also provides a comparative analysis on the soil burial degradation behaviour with traditional ones

Morphology, rheological and mechanical properties of isotropic and anisotropic PP/rPET/GnP nanocomposite samples

The effect of graphene nanoplatelets (GnPs) on the morphology, rheological, and mechanical properties of isotropic and anisotropic polypropylene (PP)/recycled polyethylene terephthalate (rPET)-based nanocomposite are reported. All the samples were prepared by melt mixing. PP/rPET and PP/rPET/GnP isotropic sheets were prepared by compression molding, whereas the anisotropic fibers were spun using a drawing module of a capillary viscometer. The results obtained showed that the viscosity of the blend is reduced by the presence of GnP due to the lubricating effect of the graphene platelets. However, the Cox–Merz rule is not respected. Compared to the PP/rPET blend, the GnP led to a slight increase in the elastic modulus. However, it causes a slight decrease in elongation at break. Morphological analysis revealed a poor adhesion between the PP and PET phases. Moreover, GnPs distribute around the droplets of the PET phase with a honey-like appearance. Finally, the effect of the orientation on both systems gives rise not only to fibers with higher modulus values, but also with high deformability and a fibrillar morphology of the dispersed PET phase. A fragile-ductile transition driven by the orientation was observed in both systems

Recycling of a multilayer barrier food packaging through the use of a nanofiller: Effect of post-consumer plastic bag conditions

Barrier food packaging films result very difficult to recycle since they are multilayer films composed by at least two different materials. In this context, aim of this study was to assess the use of a nanofiller for the mechanical recycling of multilayer barrier plastic bags used for food vacuum packaging. In particular, graphene nanoplatelets (GnPs) were used as nanofiller studying the effect of their concentration on the properties of the nanocomposites obtained by using polyamide (PA)/polyethylene (PE) bags as polymeric matrix. Moreover, the effect of plastic bags life conditions on the nanocomposite properties were evaluated by exposing the multilayer films to accelerated weathering or to contact with a fatty food simulant (olive oil). The results indicated that the incorporation of GnPs led to an enhancement of the morphology of the polymer blends, consequently resulting in nanocomposites with increased stiffness without a drastic reduction in ductility. The nanocomposites produced using post-consumer bags exhibited lower properties compared to materials produced using pre-consumer bags. However, even in this case, the addition of GnPs contributed to an improvement in the properties demonstrating that the use of this nanofiller can be a viable method to recycle multilayer packaging