Lack of agreement between measured and self-reported distance from public green parks in Glasgow, Scotland

<p><b>Background:</b></p> <p>Reviews have reported mixed findings for associations between physical activity and proximity to a range of environmental resources. Initially most studies used self reported proximity, but more are now using GIS techniques to measure proximity objectively. We know little about the extent of agreement between self reported and directly measured proximity of the same resource.</p> <p><b>Methods:</b></p> <p>We used previously collected data in a community survey in Glasgow in which 658 respondents aged around 40 and 60 were asked whether they lived within half a mile of a public park. We compared their answers with GIS measures of whether there was a park within a half mile service area of their home (and whether their home was within a half mile crow fly buffer of a park).</p> <p><b>Results:</b></p> <p>Agreement was poor; percentage agreement between measured network distance and reported residence within 0.5 miles of a park was 62.0%, and the kappa value was 0.095. Agreement was no higher than poor in any socio-demographic subgroup, or when using crow fly buffers instead of service areas.</p> <p><b>Conclusion:</b></p> <p>One should be cautious about assuming that respondents' self reports of proximity to a resource are a valid proxy for actual distance, or vice versa. Further research is needed to establish whether actual or self-reported proximity predict physical activity or other behaviours, and if so which is the strongest predictor. Further, qualitative study, also needs to examine the basis of people's judgements about the location of resources, and the possibility that these are shaped by their social and personal significance.</p&gt

Projective homogeneous varieties birational to quadrics

We will consider an explicit birational map between a quadric and the projective variety X(J) of traceless rank one elements in a simple reduced Jordan algebra J. X(J) is a homogeneous G-variety for the automorphism group G=Aut(J). We will show that the birational map is a blow up followed by a blow down. This will allow us to use the blow up formula for motives together with Vishik's work on the motives of quadrics to give a motivic decomposition of X(J).Comment: 20 pages, 1 figur

Predicting the steady state thickness of passive films in order to prevent degradations of implant

Some implants have approximately a lifetime of 15 years. The femoral stem, for example, should be made of 316L/316LN stainless steel. Fretting corrosion, friction under small displacements, should occur during human gait, due to repeated loadings and un-loadings, between stainless steel and bone for instance. Some experimental investigations of fretting corrosion have been practiced. As well known, metallic alloys and especially stainless steels are covered with a passive film that prevents from the corrosion and degradation. This passive layer of few nanometers, at ambient temperature, is the key of our civilization according to some authors. This work is dedicated to predict the passive layer thicknesses of stainless steel under fretting corrosion with a specific emphasis on the role of proteins. The model is based on the Point Defect Model (micro scale) and an update of the model on the friction process (micro-macro scale). Genetic algorithm was used for finding solution of the problem. The major results are, as expected from experimental results, albumin prevents from degradation at the lowest concentration of chlorides; an incubation time is necessary for degrading the passive film; under fretting corrosion and high concentration of chlorides the passive behavior is annihilated

Vortex Lattice Structure of Fulde-Ferrell-Larkin-Ovchinnikov Superconductors

In superconductors with singlet pairing, the inhomogeneous Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) state is expected to be stabilized by a large Zeeman splitting. We develop an efficient method to evaluate the Landau-Ginzburg free energies of FFLO-state vortex lattices and use it to simplify the considerations that determine the optimal vortex configuration at different points in the phasediagram. We demonstrate that the order parameter spatial profile is completely determined, up to a uniform translation, by its Landau level index n and the vortex Lattice structure and derive an explicit expression for the order parameter spatial profile that can be used to determine n from experimental data.Comment: 6 pages with one embedded color figure. Minor changes. Final version as publishe

Extension of Martian orbits using continuous low-thrust propulsion

There has recently been significant interest in exploration of the Martian surface and atmosphere with a view to future human exploration. Thus missions must be developed which are responsive to these scientific goals. This work therefore develops novel orbits around Mars using continuous low-thrust propulsion to enable new and unique investigations of the red planet. This paper considers the use of continuous acceleration, using Solar Electric Propulsion, to alter the critical inclination of Highly Elliptical Orbits away from the conventional values, to any inclination required to optimally fulfill the mission objectives. This allows the spacecraft to spend a large amount of time over a region of interest as a result of apoareion dwell, thus allowing enhanced opportunities for remote sensing. In addition to this, the extension of existing circular Sun-synchronous orbits is considered as well as the development of Sun-synchronous Highly Elliptical Orbits, which force the ascending node angle to rotate at the same rate as the mean rotation of the Sun, whilst maintaining a constant argument of perihelion over the orbit. Thus, allowing simplification of the spacecraft thermal environment. Notably, we can enable these orbits using existing Electric Propulsion technology

Relating in situ hydraulic conductivity, particle size and relative density of superficial deposits in a heterogeneous catchment

Estimating the permeability of superficial deposits is fundamental to many aspects of catchment science, but can be problematic where insufficient in situ measurements are available from pumping tests in piezometers. Consequently, common practice is to estimate permeability from the material description or, where available, particlesize distribution using a formula such as Hazen. In this study, we examine the relationships between particlesize, relativedensity and hydraulicconductivity in superficial deposits in Morayshire, Northern Scotland: a heterogeneous environment typical of many catchments subject to previous glaciations. The superficial deposits comprise glaciofluvial sands and gravels, glacial tills and moraines, raised marine sediments, and blown sands. Thirty-eight sites were investigated: hydraulicconductivity measurements were made using repeated Guelph permeameter measurements, cone resistance was measured in situ with a Panda dynamic cone penetrometer; material descriptions were made in accordance with BS5930:1999; and disturbed samples were taken for particlesize analysis. Overall hydraulicconductivity (K) varied from 0.001 m/d to >40 m/d; glacial till had the lowest K (median 0.027 m/d) and glacial moraine the highest K (median 30 m/d). However, within each geological unit there was great variability in measured hydraulicconductivity values. Multiple linear regression of the data indicated that log d10 and relativedensity (indicated by cone resistance or BS5930:1999 soil state description) were independent predictors of log K and together gave a relationship with an R2 of 0.80. Material description using the largest fraction (e.g. sand or gravel) had little predictive power. Therefore, in heterogeneous catchments, the permeability of superficial deposits is most strongly related to the finest fraction (d10) and relativedensity of the material. In situ Guelph permeameter measurements at outcrops with good geological characterisation provide an easy and reliable method of determining the permeability of particular units of superficial deposits

Basic Living Expenses for the Canadian Elderly

Our research undertakes to determine the basic living expenses required by Canadian seniors living in different circumstances in terms of age, gender, city of residence, household size, homeowner or renter, means of transportation and health status. The paper develops required expenses for food, shelter, health care, transportation and miscellaneous. The research identifies the typical expenses of seniors in each of these categories. Using 2001 as our base year, we follow the US Elder Standard to build an elderly threshold for Halifax, Montreal, Toronto, Calgary and Vancouver. The research is unique because it is the first Canadian study of absolute basic living expenses tailored to seniors, rather than simply to adults in general. This information is important to seniors, prospective retirees, financial planners, policy makers and actuaries in assessing the minimum level of income required in retirement and the adequacy of savings and income security programs. Our conclusions suggest that individual circumstances, rather than age, are the primary drivers in determining the cost of these basic expenses. Seniors are a diverse group, particularly with respect to health, so it is important that seniors and financial planners do not blindly rely on a fixed replacement ratio or universal level of income when projecting the level of finances needed to retire. This research enables the reader to determine the threshold that is suited to a senior’s general circumstances.Retirement Income Adequacy; Absolute Measure; Elder Standard; Canadian Data