Understanding olive oil stability using filtration and high hydrostatic pressure

Veiled extra virgin olive oil (VEVOO) is very attractive on the global market. A study was performed to highlight the role of different amounts of water and microorganisms on the evolution of VEVOO quality during storage, using the selective effects of the application of individual or combined filtration and high hydrostatic pressure (HHP) treatments. Four oil processing trials were carried out in four replicates, resulting in a full factorial design with two independent fixed factors: filtration and HPP treatments. The turbidity of all the olive oil samples was characterized. Furthermore, all the olive oil samples were analysed for legal parameters, volatile organic compounds and phenolic compounds during the storage tests. The microbial contamination in the presence of a high level of water activity (>0.6 Aw) was related to the formation of volatile aroma compounds, which were responsible for the \u201cfusty\u201d sensory defect. Furthermore, high water activity values were related to an increase in the hydrolytic degradation rate of the phenolic compounds. The oil turbidity has to be planned and controlled, starting from adjustment of the water content and application of good manufacturing practices

Filtration scheduling: Quality changes in freshly produced virgin olive oil

Filtration is the most widespread stabilisation operation for extra virgin olive oil, preventing microbial and enzymatic changes. However, during the harvest, the workload of olive mills is at its peak. This results in two approaches to filtration: (i) delays it until after harvesting, increasing the risk of degraded oil quality, and (ii) filters it immediately, increasing the workload. The aim of our experiment is to assess the risk of delaying filtration and establish a safe delay time. Changes in the sensory profile and volatile compound contents were evaluated during 30 days in filtered and unfiltered samples. Significant differences were related to filtration: both turbidity grade and microbial contamination; no differences for the legal parameters were found. Two, contrasting, results were obtained with respect to oil quality: (i) the fusty defect, appearing in less than five days in unfiltered oils, leading to the downgrade of the oil\u2019s commercial category, and (ii) filtration removing some lipoxygenase volatile compounds. Consequently, a fruity attribute was more pronounced in unfiltered samples until day five of storage; it seems that, from this point, the fusty defect masked a fruity attribute. Hence, filtering within a few days strongly reduced the risk of degraded oil quality compared to a delayed filtration

On line power spectra identification and whitening for the noise in interferometric gravitational wave detectors

In this paper we address both to the problem of identifying the noise Power Spectral Density of interferometric detectors by parametric techniques and to the problem of the whitening procedure of the sequence of data. We will concentrate the study on a Power Spectral Density like the one of the Italian-French detector VIRGO and we show that with a reasonable finite number of parameters we succeed in modeling a spectrum like the theoretical one of VIRGO, reproducing all its features. We propose also the use of adaptive techniques to identify and to whiten on line the data of interferometric detectors. We analyze the behavior of the adaptive techniques in the field of stochastic gradient and in the Least Squares ones.Comment: 28 pages, 21 figures, uses iopart.cls accepted for pubblication on Classical and Quantum Gravit

Inertial control of the mirror suspensions of the VIRGO interferometer for gravitational wave detection

In order to achieve full detection sensitivity at low frequencies, the mirrors of interferometric gravitational wave detectors must be isolated from seismic noise. The VIRGO vibration isolator, called 'superattenuator', is fully effective at frequencies above 4 Hz. Nevertheless, the residual motion of the mirror at the mechanical resonant frequencies of the system are too large for the interferometer locking system and must be damped. A multidimensional feedback system, using inertial sensors and digital processing, has been designed for this purpose. An experimental procedure for determining the feedback control of the system has been defined. In this paper a full description of the system is given and experimental results are presented.Comment: 17 pages, 11 figures, accepted for publication on Review of Scientific Instrument

Angular momentum sharing in dissipative collisions

Light charged particles emitted by the projectile-like fragment were measured in the direct and reverse collision of $^{93}$Nb and $^{116}$Sn at 25 AMeV. The experimental multiplicities of Hydrogen and Helium particles as a function of the primary mass of the emitting fragment show evidence for a correlation with net mass transfer. The ratio of Hydrogen and Helium multiplicities points to a dependence of the angular momentum sharing on the net mass transfer.Comment: 8 pages, 2 figure