Correlation between birth weight and placental weight in healthy and diabetic puerperae

Abstract Objective The birth weight/placental weight ratio has an important predictive value for perinatal mortality and morbidity and for cardiovascular diseases in adult life. In this study, we compared the birth weight/placental weight (BW/PW) ratio and the correlation between the two parameters in diabetic women with that observed in healthy women. Materials and Methods A total of 347 consecutive newborn infants from healthy puerperae, 164 newborns from puerperae with gestational diabetes, 148 newborns from puerperae with preexisting type 1 diabetes, and 40 newborns from puerperae with preexisting type 2 diabetes have been studied from the White population of Rome. The research project was approved by the Institutional Review Board and informed written consent was obtained from the participating mothers. Results The BW/PW ratio is higher, and the correlation between the two parameters is lower in all classes of diabetes as compared to healthy puerperae. A remarkably low correlation is observed in preexisting diabetes pointing to a dissociation of fetal growth from placental growth. Discussion In diabetic pregnancy the BW/PW ratio is higher, and the correlation between birth weight and placental weight is lower in all classes of diabetic as compared to healthy puerperae pointing to a relative dissociation between the two parameters. It has been suggested that the increase of glycemic levels in diabetic pregnancy predisposes to important diseases in adult life. The dissociation of BW from PW in infants of diabetic pregnancy could be a predictor of the risk for such diseases of adult life

Powder bed monitoring via digital image analysis in additive manufacturing

Due to the nature of Selective Laser Melting process, the built parts suffer from high chances of defects formation. Powders quality have a significant impact on the final attributes of SLM-manufactured items. From a processing standpoint, it is critical to ensure proper powder distribution and compaction in each layer of the powder bed, which is impacted by particle size distribution, packing density, flowability, and sphericity of the powder particles. Layer-by-layer study of the process can provide better understanding of the effect of powder bed on the final part quality. Image-based processing technique could be used to examine the quality of parts fabricated by Selective Laser Melting through layerwise monitoring and to evaluate the results achieved by other techniques. In this paper, a not supervised methodology based on Digital Image Processing through the build-inmachine camera is proposed. Since the limitation of the optical system in terms of resolution, positioning, lighting, field-of-view, many efforts were paid to the calibration and to the data processing. Its capability to individuate possible defects on SLM parts was evaluated by a Computer Tomography results verification

Investigation via morphological analysis of aluminium foams produced by replication casting

Foams and porous materials with cellular structure have many interesting combinations of physical and mechanical properties coupled with low specific weight. By means of replication casting it is possible to manufacture foams from molten metal without direct foaming. A soluble salt is used as space holder, which is removed by leaching in water. This can be done successfully if the content of space holding fillers is so high that all the granules are interconnected. One of the main advantages of using the replication casting is a close control of pore sizes which is given by the distribution of particle sizes of the filler material. This contrasts with the pore size distribution of the materials foamed by other processes where a wider statistical distribution of pores is found. On the other hand, the maximum porosities that can be achieved using space holders are limited to values below 60%, whereas the other methods allow for porosities up to 98%. Temperature of the mould and infiltration pressure are critical process parameters: a typical problem encountered is the premature solidification of the melt, especially due to the high heat capacity of the salt. In this work foam properties such as cell shape, distribution and anisotropy and defect presence are investigated by using digital image processing technique. For this purpose replicated AlSi7Mg0.3 alloy foams are produced by infiltrating preforms of NaCl particles, varying the metal infiltration pressure and the mould preheating temperature. An original procedure based on image analysis has been set up to determine size, morphology and distribution of cells. The paper demonstrates that this methodology, coupled with microstructural analysis, is a useful tool for investigating the effects of process parameters on foam properties

Selective laser melting process of Al–based pyramidal horns for the w-band: fabrication and testing

In the context of exploring the possibility of using Al-powder Selective Laser Meltingto fabricate horn antennas for astronomical applications at millimeter wavelengths,we describe the design, the fabrication, the mechanical characterization, and theelectromagnetic performance of additive manufactured horn antennas for the W-band. Our aim, in particular, is to evaluate the performance impact of two basickinds of surface post-processing (manual grinding and sand-blasting) to deal withthe well-known issue of high surface roughness in 3D printed devices. We performedcomparative tests of co-polar and cross-polar angular response across the whole W-band, assuming a commercially available rectangular horn antenna as a reference.Based on gain and directivity measurements of the manufactured samples, we finddecibel-level detectable deviations from the behavior of the reference horn antenna,and marginal evidence of performance degradation at the top edge of the W-band.We conclude that both kinds of post-processing allow achieving good performancefor the W-band, but the higher reliability and uniformity of the sand-blasting post-process encourage exploring similar techniques for further development of aluminumdevices at these frequencies

Field reliability of GaAs emitters for fiber optic telecommunication systems

GaAs based emitters are widely used in telecommunication systems, and will be probably the core of short haul communications, even if a lot of doubts still exist on their reliability and the few available field results are not too optimistic. For these reasons we decided to follow with a particular attention all the problems related to these devices, investigating reliability by means of accelerated tests and of an accurate survey of field troubles. In this paper, we first of all report our field data, coming from more than five years experience, which show that "reasonable" results (in the range of 2000 FITs for LDs), can be obtained with commercially available devices; as a second step, failure analysis allows to localize failures,thus understanding the appropriate corrective actions to be taken. highlighting the specific process report also same For chip related failures, detailed examples are reported, different failure mechanisms, that, when not related to defects, are the same found during accelerated tests; we examples of failures due to interconnections and packaging

Relationships among genome size, environmental conditions and geographical distribution in natural populations of NW Patagonian species of Berberis L. (Berberidaceae)

Variation in genome size of 24 populations belonging to 11 NW Patagonian species of Berberis was analysed as a function of the environment and geographical location. The variation showed three levels of discontinuity, two of which corresponded to diploid species (2n = 28) while the third corresponded to polyploid species (2n = 56). Diploids with DNA content ranging from 1.463 pg to 1.857 pg included Berberis cabrerae, B. chillanensis, B. montana, B. serrato-dentata and B. bidentata. Diploids with DNA content ranging from 2.875 pg to 3.806 pg included B. linearifolia, B. darwinii, B. parodii and B. empetrifolia. The genome size of the polyploid species B. buxifolia and B. heterophylla ranged from 5.809 pg to 6.844 pg. Principal component analysis (PCA) was applied to represent the variability of environmental conditions. The eigenvectors of the principal component axes showed that PCl discriminates the populations according to rainfall, types of vegetation and geomorphology; altitude and latitude, on the other hand, contribute to PC2 and PC3, respectively. From these results it is concluded: (1) that diploids with lower DNA content grow in high-elevation sites having greater rainfall but lower water availability; (2) diploids with higher DNA content are associated with half-elevation forests where the vegetative period is longer, the water availability is greater and the temperatures are higher; and (3) the distribution pattern of polyploids is considerably wider than that of diploids, which are geographically and ecologically restricted to forest areas. These results suggest that the C-value plays an important role in the ability of the species to adapt to different growing conditions.Facultad de Ciencias Agrarias y Forestale

Relationships among genome size, environmental conditions and geographical distribution in natural populations of NW Patagonian species of Berberis L. (Berberidaceae)

Variation in genome size of 24 populations belonging to 11 NW Patagonian species of Berberis was analysed as a function of the environment and geographical location. The variation showed three levels of discontinuity, two of which corresponded to diploid species (2n = 28) while the third corresponded to polyploid species (2n = 56). Diploids with DNA content ranging from 1.463 pg to 1.857 pg included Berberis cabrerae, B. chillanensis, B. montana, B. serrato-dentata and B. bidentata. Diploids with DNA content ranging from 2.875 pg to 3.806 pg included B. linearifolia, B. darwinii, B. parodii and B. empetrifolia. The genome size of the polyploid species B. buxifolia and B. heterophylla ranged from 5.809 pg to 6.844 pg. Principal component analysis (PCA) was applied to represent the variability of environmental conditions. The eigenvectors of the principal component axes showed that PCl discriminates the populations according to rainfall, types of vegetation and geomorphology; altitude and latitude, on the other hand, contribute to PC2 and PC3, respectively. From these results it is concluded: (1) that diploids with lower DNA content grow in high-elevation sites having greater rainfall but lower water availability; (2) diploids with higher DNA content are associated with half-elevation forests where the vegetative period is longer, the water availability is greater and the temperatures are higher; and (3) the distribution pattern of polyploids is considerably wider than that of diploids, which are geographically and ecologically restricted to forest areas. These results suggest that the C-value plays an important role in the ability of the species to adapt to different growing conditions.Facultad de Ciencias Agrarias y Forestale

Genetic Variability Within ADA Gene and Susceptibility to Type 2 Diabetes in Obese Subjects

The complex relationship between adenosine, obesity and Type 2 Diabetes (T2D) prompted us to investigate a possible role of genetic variability within adenosine deaminase (ADA) gene in the susceptibility to T2D in obese subjects.  With enzymatic activity ADA contributes to the regulation of adenosine concentration in body fluids and as ecto- enzyme modulates signaling events involving adenosine receptors on cell surface.Three polymorphic sites within the ADA gene, ADA1 (exon 1), ADA2 (intron 2) and ADA6 (exon6) were examined in 299 subjects from the White population of Rome admitted to the Hospital for cardiovascular diseases. Each site shows two alleles: the alleles with higher frequency are ADA1*1, ADA2*1 and ADA6*2.Informed consent was obtained by the patients to participate to the study that was approved by the Council of Department.For the three sites examined the relative risk of T2D in obese subjects (vs non obese) is higher in carriers of the homozygous genotype for the allele with higher frequency. The three loci cooperate to the risk that is low in subjects carrying no homozygous genotype (O.R. 1.25) but it is very high (O.R. 13.240) in subjects carrying the three homozygous genotypes.From a practical point of view, the study of ADA gene may help to detect obese subjects at high risk of T2D who need active preventive measures. The results point to the importance of further studies on the role of genetic variability within ADA gene on the relationship within obesity and T2D