Design, Performance, and Calibration of CMS Hadron-Barrel Calorimeter Wedges

Extensive measurements have been made with pions, electrons and muons on four production wedges of the Compact Muon Solenoid (CMS) hadron barrel (HB) calorimeter in the H2 beam line at CERN with particle momenta varying from 20 to 300 GeV/c. Data were taken both with and without a prototype electromagnetic lead tungstate crystal calorimeter (EB) in front of the hadron calorimeter. The time structure of the events was measured with the full chain of preproduction front-end electronics running at 34 MHz. Moving-wire radioactive source data were also collected for all scintillator layers in the HB. These measurements set the absolute calibration of the HB prior to first pp collisions to approximately 4%

Effects of radiation and their consequences for the performance of the forward calorimeters in the CMS experiment

The experiments at the Large Hadron Collider (LHC) will have to deal with unprecedented radiation levels. In the large-rapidity regions, close to the beam pipe, these levels reach megagrays per year. The detectors to be installed in these regions, the HF Calorimeters, are designed to operate under these conditions, In this paper, we describe the results of studies in which a prototype calorimeter was exposed to radiation of the type and intensity expected at the LHC. These studies made it possible to estimate the effects of this radiation on the response and the resolution of the calorimeter as a function of time during LHC operation

On the differences between high-energy proton and pion showers and their signals in a non-compensating calorimeter

We present the results of experimental studies of hadron showers in a copper:quartz-fiber calorimeter, based on the detection of Cherenkov light. These studies show that there are very significant differences between the signals from protons and pions at the same energies. In the energy range between 200 and 375 GeV, where these studies were performed, the calorimeter's response to protons was typically 10% smaller than the response to pions. On the other hand, the energy resolution was about 25% better for protons. In addition, the protons had a Gaussian line shape, whereas the pion response curve was asymmetric. These differences can be understood from the requirements of baryon number conservation in the shower development. They are expected to be present in any non-compensating calorimeter, to a degree determined by the e/h value

Design, performance, and calibration of CMS forward calorimeter wedges

We report on the test beam results and calibration methods using high energy electrons, pions and muons with the CMS forward calorimeter (HF). The HF calorimeter covers a large pseudorapidity region (3 \u3c= vertical bar eta vertical bar \u3c= 5), and is essential for a large number of physics channels with missing transverse energy. It is also expected to play a prominent role in the measurement of forward tagging jets in weak boson fusion channels in Higgs production. The HF calorimeter is based on steel absorber with embedded fused-silica-core optical fibers where Cherenkov radiation forms the basis of signal generation. Thus, the detector is essentially sensitive only to the electromagnetic shower core and is highly non-compensating (e/h approximate to 5). This feature is also manifest in narrow and relatively short showers compared to similar calorimeters based on ionization. The choice of fused-silica optical fibers as active material is dictated by its exceptional radiation hardness. The electromagnetic energy resolution is dominated by photoelectron statistics and can be expressed in the customary form as a/root E circle plus b. The stochastic term a is 198% and the constant term b is 9%. The hadronic energy resolution is largely determined by the fluctuations in the neutral pion production in showers, and when it is expressed as in the electromagnetic case, a = 280% and b = 11%

CMS : the TriDAS Project Technical Design Report; v.1, the Trigger Systems

CM