7,306 research outputs found
A Graphene Field-Effect Device
In this letter, a top-gated field effect device (FED) manufactured from
monolayer graphene is investigated. Except for graphene deposition, a
conventional top-down CMOS-compatible process flow is applied. Carrier
mobilities in graphene pseudo-MOS structures are compared to those obtained
from top-gated Graphene-FEDs. The extracted values exceed the universal
mobility of silicon and silicon-on-insulator MOSFETs.Comment: 12 pages, 3 figure
Electrical observation of a tunable band gap in bilayer graphene nanoribbons at room temperature
We investigate the transport properties of double-gated bilayer graphene
nanoribbons at room temperature. The devices were fabricated using conventional
CMOS-compatible processes. By analyzing the dependence of the resistance at the
charge neutrality point as a function of the electric field applied
perpendicular to the graphene surface, we show that a band gap in the density
of states opens, reaching an effective value of ~sim50 meV. This demonstrates
the potential of bilayer graphene as FET channel material in a conventional
CMOS environment.Comment: 3 pages, 3 figure
The Alzheimer variant of Lewy body disease: A pathologically confirmed case-control study
The objective of the study was to identify clinical features that distinguish patients with dementia with Lewy bodies (DLB), who were classified as Alzheimer's disease ( AD) patients, from patients with AD. We examined a group of 27 patients from our memory clinic, originally diagnosed with AD, of whom 6 were postmortem found to have DLB. For the present study, we compared cognitive, noncognitive and neurological symptoms between the two groups. We found that there were no differences on ratings of dementia and scales for activities of daily living. Patients with DLB performed better on the MMSE and the memory subtest of the CAMCOG, but there was no difference in any other cognitive domain. Furthermore, genetic risk factors, including family history of dementia or allele frequency of the apolipoprotein epsilon 4, did not discriminate between the two groups, and there were no differences on CCT scans. Taken together, our findings suggest that Lewy body pathology may be present in patients who do not show the typical clinical features which distinguish DLB from AD. Copyright (C) 2005 S. Karger AG, Basel
Modification of Ni - nanotubes by implanting ions C3+
Using PET track-etched membranes with thickness of 12 μm as template, polycrystalline nickel nanotubes with outer diameter of 380 nm and wall thickness 95 nm were synthesized by electrochemical method. A comprehensive study of the structural, morphological and electrical characteristics of irradiated at different conditions Ni nanotubes was carried out. The ability of modification of structural parameters such as lattice parameters and the average size of crystallites and conductivity of Ni nanotubes by irradiated with С3+ ions with energy 1.75 MeV/nucleon and fluence ranging from 1 × 109 to 5 × 1011 cm-2 was shown
Исследование влияния магнитной обработки на агрегатные свойства влажных дисперсных материалов
Feedback control of unstable cellular solidification fronts
We present a numerical and experimental study of feedback control of unstable
cellular patterns in directional solidification (DS). The sample, a dilute
binary alloy, solidifies in a 2D geometry under a control scheme which applies
local heating close to the cell tips which protrude ahead of the other. For the
experiments, we use a real-time image processing algorithm to track cell tips,
coupled with a movable laser spot array device, to heat locally. We show,
numerically and experimentally, that spacings well below the threshold for a
period-doubling instability can be stabilized. As predicted by the numerical
calculations, cellular arrays become stable, and the spacing becomes uniform
through feedback control which is maintained with minimal heating.Comment: 4 pages, 4 figures, 1 tabl
Modeling of primary dendrite arm spacing variations in thin-slab casting of low carbon and low alloy steels
Solidification structure of a High Strength Low Alloy (HSLA) steel, in terms of dendrite arm spacing distribution across the shell thickness, is studied in a breakout shell from a thin-slab caster at Tata Steel in IJmuiden. Columnar dendrites were found to be the predominant morphology throughout the shell with size variations across the shell thickness. Primary Dendrite Arm Spacing (PDAS) increases by increasing the distance from meniscus or slab surface. Subsequently, a model is proposed to describe the variation of the PDAS with the shell thickness (the distance from slab surface) under solidifiction conditions experienced in the primary cooling zone of thin-slab casting. The proposed relationship related the PDAS to the shell thickness and, hence, can be used as a tool for predicting solidifcation structure and optimizing the thin-slab casting of low alloy steels
RELIABILITY OF DROP JUMP VARIATIONS IN PERFORMANCE DIAGNOSTICS
In several sports athletes have to produce maximal power for accelerating the body and/or sport equipment (e.g. long jump, shot putt, basketball, etc.). The primary indicator used for estimating power output in drop jumps are the peak force rate (Fex) and the peak force (Fmax). These variables also characterise the reactive force ability of an athlete during a stretch-shortening-cycle (SSC). In order to use the accumulated energy produced in the eccentric phase during the concentric contraction, the contact please revise must not be longer than 200 ms (Komi 1984). Reactive force abilities are commonly tested in drop jumps (DJ). The accomplishment of DJ is variously described in the literature, so no standardized conditions are given (Baca 1999). One corresponding aspect is the arm position (free arm-swing vs. arms akimbo). Particularly, jumps with arm-swing require a higher grade of coordination (e.g. basketball) and are associated with an enhanced jump height. DJs with arms akimbo are often used in subjects with less sports experience or if the performance diagnostics primarily focuses on the power output in isolated leg extensions. Another aspect is the method of calculating the jump height from the measured force data. The calculation of the jump height from the momentum (based on the force-time-curve) might be inaccurate as the exact drop height is not known. Consequently, the jump height often is calculated from the flight time. This method, however, is also inaccurate if the landing position differs substantially from the take-off position. This problem might be solved performing a consecutive double DJ. Thus, the aim of the study is to investigate different DJ variations with respect to reliability
- …