Ferroelectric Sm-doped BiMnO3 thin films with ferromagnetic transition temperature enhanced to 140 K.

A combined chemical pressure and substrate biaxial pressure crystal engineering approach was demonstrated for producing highly epitaxial Sm-doped BiMnO(3) (BSMO) films on SrTiO(3) single crystal substrates, with enhanced magnetic transition temperatures, TC up to as high as 140 K, 40 K higher than that for standard BiMnO(3) (BMO) films. Strong room temperature ferroelectricity with piezoresponse amplitude, d(33) = 10 pm/V, and long-term retention of polarization were also observed. Furthermore, the BSMO films were much easier to grow than pure BMO films, with excellent phase purity over a wide growth window. The work represents a very effective way to independently control strain in-plane and out-of-plane, which is important not just for BMO but for controlling the properties of many other strongly correlated oxides.This research was funded by the Engineering and Physical Sciences Research Council, (EP/P50385X/1), the European Research Council (ERC-2009-AdG 247276 NOVOX). The TEM work at Texas A&M University was funded by the U.S. National Science Foundation (NSF-1007969).This is the final published manuscript. It is available online through ACS in Applied Materials and Interfaces here: http://pubs.acs.org/doi/abs/10.1021/am501351c

Self-assembled oxide films with tailored nanoscale ionic and electronic channels for controlled resistive switching.

Resistive switches are non-volatile memory cells based on nano-ionic redox processes that offer energy efficient device architectures and open pathways to neuromorphics and cognitive computing. However, channel formation typically requires an irreversible, not well controlled electroforming process, giving difficulty to independently control ionic and electronic properties. The device performance is also limited by the incomplete understanding of the underlying mechanisms. Here, we report a novel memristive model material system based on self-assembled Sm-doped CeO2 and SrTiO3 films that allow the separate tailoring of nanoscale ionic and electronic channels at high density (∼10(12) inch(-2)). We systematically show that these devices allow precise engineering of the resistance states, thus enabling large on-off ratios and high reproducibility. The tunable structure presents an ideal platform to explore ionic and electronic mechanisms and we expect a wide potential impact also on other nascent technologies, ranging from ionic gating to micro-solid oxide fuel cells and neuromorphics.This work was supported by the European Research Council (ERC) (Advanced Investigator grant ERC-2009-AdG-247276-NOVOX) and the Cambridge Commonwealth, European & International Trust. We further acknowledge funding from ERC grant InsituNANO, 279342, (S.T. and S.H.) and the Engineering and Physical Sciences Research Council (EPSRC), EP/P005152/1 (S.H.). Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the US Department of Energy’s National Nuclear Security Administration under contract DE-AC04-94AL85000. The work at Los Alamos was supported by the U.S. Department of Energy through the LDRD program and performed, in part, at the Center for Integrated Nanotechnologies (CINT), a U.S. Department of Energy, Office of Basic Energy Sciences user facility.This is the final version of the article. It first appeared from Nature Publishing Group via https://www.nature.com/articles/ncomms1237

Reaction method control of impurity scattering in C-doped MgB2: proving the role of defects besides C substitution level

In this study, Si and C were incorporated into polycrystalline MgB 2 via in situ reaction of Mg and B with either SiC or with separate Si and C (Si+C). The electrical transport and magnetic properties of the two series of samples were compared. The corrected resistivity at 40 K, ρA(40 K), is higher for the samples reacted with SiC regardless of the carbon (C) substitution level, indicating larger intragrain scattering because of the simultaneous reaction between Mg and SiC and carbon substitution during the formation of MgB2. In addition, because of the cleaner reaction route for the samples reacted with SiC, the calculated active area that carries current, AF, is twice that of the (Si+C) samples. On the other hand, the upper critical field, Hc2, was similar for both sets of samples despite their different C substitution levels, which proves the importance of defect scattering in addition to C substitution level. Hence, the form of the precursor reactants is critical for tuning the form of Hc2(T)

Room Temperature Ferrimagnetism and Ferroelectricity in Strained, Thin Films of BiFe0.5Mn0.5O3.

Highly strained films of BiFe0.5Mn0.5O3 (BFMO) grown at very low rates by pulsed laser deposition were demonstrated to exhibit both ferrimagnetism and ferroelectricity at room temperature and above. Magnetisation measurements demonstrated ferrimagnetism (TC ∼ 600K), with a room temperature saturation moment (MS ) of up to 90 emu/cc (∼ 0.58 μB /f.u) on high quality (001) SrTiO3. X-ray magnetic circular dichroism showed that the ferrimagnetism arose from antiferromagnetically coupled Fe3+ and Mn3+. While scanning transmission electron microscope studies showed there was no long range ordering of Fe and Mn, the magnetic properties were found to be strongly dependent on the strain state in the films. The magnetism is explained to arise from one of three possible mechanisms with Bi polarization playing a key role. A signature of room temperature ferroelectricity in the films was measured by piezoresponse force microscopy and was confirmed using angular dark field scanning transmission electron microscopy. The demonstration of strain induced, high temperature multiferroism is a promising development for future spintronic and memory applications at room temperature and above.This is the final published version. It's also available from Advanced Functional Materials: http://onlinelibrary.wiley.com/doi/10.1002/adfm.201401464/full

Nanoengineering room temperature ferroelectricity into orthorhombic SmMnO 3 films

Abstract: Orthorhombic RMnO3 (R = rare-earth cation) compounds are type-II multiferroics induced by inversion-symmetry-breaking of spin order. They hold promise for magneto-electric devices. However, no spontaneous room-temperature ferroic property has been observed to date in orthorhombic RMnO3. Here, using 3D straining in nanocomposite films of (SmMnO3)0.5((Bi,Sm)2O3)0.5, we demonstrate room temperature ferroelectricity and ferromagnetism with TC,FM ~ 90 K, matching exactly with theoretical predictions for the induced strain levels. Large in-plane compressive and out-of-plane tensile strains (−3.6% and +4.9%, respectively) were induced by the stiff (Bi,Sm)2O3 nanopillars embedded. The room temperature electric polarization is comparable to other spin-driven ferroelectric RMnO3 films. Also, while bulk SmMnO3 is antiferromagnetic, ferromagnetism was induced in the composite films. The Mn-O bond angles and lengths determined from density functional theory explain the origin of the ferroelectricity, i.e. modification of the exchange coupling. Our structural tuning method gives a route to designing multiferroics

Face mask integrated with flexible and wearable manganite oxide respiration sensor

Face masks are key personal protective equipment for reducing exposure to viruses and other environmental hazards such as air pollution. Integrating flexible and wearable sensors into face masks can provide valuable insights into personal and public health. The advantages that a breath-monitoring face mask requires, including multi-functional sensing ability and continuous, long-term dynamic breathing process monitoring, have been underdeveloped to date. Here, we design an effective human breath monitoring face mask based on a flexible La0.7Sr0.3MnO3 (LSMO)/Mica respiration sensor. The sensor’s capabilities and systematic measurements are investigated under two application scenes, namely clinical monitoring mode and daily monitoring mode, to monitor, recognise, and analyse different human breath status, i.e., cough, normal breath, and deep breath. This sensing system exhibits super-stability and multi-modal capabilities in continuous and long-time monitoring of the human breath. We determine that during monitoring human breath, thermal diffusion in LSMO is responsible for the change of resistance in flexible LSMO/Mica sensor. Both simulated and experimental results demonstrate good discernibility of the flexible LSMO/Mica sensor operating at different breath status. Our work opens a route for the design of novel flexible and wearable electronic devices

General anaesthetic and airway management practice for obstetric surgery in England: a prospective, multi-centre observational study

There are no current descriptions of general anaesthesia characteristics for obstetric surgery, despite recent changes to patient baseline characteristics and airway management guidelines. This analysis of data from the direct reporting of awareness in maternity patients' (DREAMY) study of accidental awareness during obstetric anaesthesia aimed to describe practice for obstetric general anaesthesia in England and compare with earlier surveys and best-practice recommendations. Consenting patients who received general anaesthesia for obstetric surgery in 72 hospitals from May 2017 to August 2018 were included. Baseline characteristics, airway management, anaesthetic techniques and major complications were collected. Descriptive analysis, binary logistic regression modelling and comparisons with earlier data were conducted. Data were collected from 3117 procedures, including 2554 (81.9%) caesarean deliveries. Thiopental was the induction drug in 1649 (52.9%) patients, compared with propofol in 1419 (45.5%). Suxamethonium was the neuromuscular blocking drug for tracheal intubation in 2631 (86.1%), compared with rocuronium in 367 (11.8%). Difficult tracheal intubation was reported in 1 in 19 (95%CI 1 in 16-22) and failed intubation in 1 in 312 (95%CI 1 in 169-667). Obese patients were over-represented compared with national baselines and associated with difficult, but not failed intubation. There was more evidence of change in practice for induction drugs (increased use of propofol) than neuromuscular blocking drugs (suxamethonium remains the most popular). There was evidence of improvement in practice, with increased monitoring and reversal of neuromuscular blockade (although this remains suboptimal). Despite a high risk of difficult intubation in this population, videolaryngoscopy was rarely used (1.9%)

Lithium Loss in Vacuum Deposited Thin Films.

Publication status: Publishe

Dielectric films for high performance capacitive energy storage: multiscale engineering

Dielectric capacitors are fundamental components in electronic and electrical systems due to their high-rate charging/discharging character and ultrahigh power density. Film dielectrics possess larger breakdown strength and higher energy density...</p

LITHIUM-BASED VERTICALLY ALIGNED NANCOMPOSITE FILMS INCORPORATING LixLa0.32(Nb0.7Ti0.32)O3 ELECTROLYTE WITH HIGH Li+ ION CONDUCTIVITY

Vertically aligned nanocomposite (VAN) thin films have shown strong potential in oxide nanoionics but are yet to be explored in detail in solid-state battery systems. Their 3D architectures are attractive because they may allow enhancements in capacity, current and power densities. Also, owing to their large interfacial surface areas, VAN could serve as models to study interfaces and solid-electrolyte interphase formation. Here, we have deposited highly crystalline and epitaxial vertically aligned nanocomposite films comprised of a LixLa0.32±0.05(Nb0.7±0.1Ti0.32±0.05)O3±δ-Ti0.8±0.1Nb0.17±0.03O2±δ-anatase (herein referred to as LL(Nb,Ti)O-(Ti,Nb)O2) electrolyte/anode system, the first anode VAN battery system reported. This system has an order of magnitude increased Li+ ionic conductivity over that in bulk Li3xLa1/3-xNbO3 (LLNO) and is comparable with the best available Li3xLa2/3-xTiO3 (LLTO) pulsed laser deposition films. Furthermore, the ionic conducting/electrically insulating LL(Nb,Ti)O and electrically conducting (Ti,Nb)O2 phases are a prerequisite for an interdigitated electrolyte/anode system. This work opens up the possibility of incorporating VAN films into an all solid-state battery, either as electrodes or electrolytes, by the pairing of suitable materials.ERC advanced grant, EU-H2020-ERC-ADG # 882929, EROS and the Royal Academy of Engineering grant CIET1819_24 EPSRC (EP/R513180/1) EPSRC CAM-IES grant, EP/P007767 EPSRC Faraday grant, EP/T005394/1 FutureCat. Cambridge Henry Royce Institute equipment, grant EP/P024947/1 Sir Henry Royce Institute - recurrent grant EP/R00661X/1. U.S. National Science Foundation (Purdue University): DMR-1565822, DMR-2016453 and DMR-1809520