Disorder-Enhanced Dimensionless Thermoelectric Figure of Merit zT of Non-stoichiometric Organic Conductor (TTT)2I3+δ (δ ≤ 0.1)

Sample dependence of dimensionless thermoelectric figure of merit (zT) and power factor (PF) were determined for the non-stoichiometric organic conductor (TTT)2I3+δ (TTT = tetrathiatetracene, δ ≤ 0.1) with the simultaneous measurement of the electrical resistivity (ρ), thermopower (S) and thermal conductivity on small single crystals. Both the zT and PF show large sample dependence between 10 and 310 K, even though all the samples have nearly stoichiometric composition of TTT : I3- ~ 2 : 1 (δ ∼ 0). It was found that both the electrical conductivity (σ = 1/ρ) and S increase at room temperature as disorder — that is phase mismatch among the iodine chains — becomes more pronounced. This behavior contrasts the usual tendency that the S decreases as the σ increases in conventional conductors; and suggests a new strategy to improve the zT and PF by introducing an appropriate type of disorder

Controlling factors of large-scale harmful algal blooms with Karenia selliformis after record-breaking marine heatwaves

Unprecedented, large-scale harmful algal blooms (HABs) dominated by Karenia selliformis occurred off the southeastern coast of Hokkaido, Japan, from late September to early November 2021, about a month after intense and extensive marine heatwaves (MHWs) had subsided. The aims of the present study were to understand the mechanism of development, maintenance, and decay of the HABs as well as to investigate the effect of the MHWs on the HABs. We developed a one-dimensional, lower trophic-level ecosystem model (NEMURO+) to simulate the HABs. The model successfully simulated the 2021 HABs and indicated that their development, maintenance, and decay were controlled primarily by changes of water temperature. Nitrate supply from subsurface layers by seasonal vertical diffusion in autumn also helped to maintain the HABs. Vertical diffusion following MHWs in 2021 contributed to the long duration of the preferred temperature for K. selliformis and the occurrence of pre-bloom of K. selliformis, resulting in preconditioning and accelerating the HABs. However, simulations for normal years (i.e., the climatological mean during 2003–2018) showed that HABs could have occurred, even in the absence of MHWs. The simulations indicated that massive blooms of other phytoplankton species (e.g., diatoms) would not have occurred in 2021, even in the absence of a K. selliformis bloom. The implication was that the HABs in 2021 were the species-specific responses of K. selliformis. The proposed mechanism of the HABs was peculiar to our study area and differed from that previously reported for other K. selliformis blooms. Specifically, the preferred temperature for the HABs of K. selliformis was clearly lower than the previously reported preferred temperature of K. selliformis; thus, the physiological characteristics of the K. selliformis that bloomed in our study area differed from those of other K. selliformis strains. These discoveries provide the first evidence to explain how MHWs affect HABs, and to understand how inter-regional dissimilarities of K. selliformis can lead to large-scale, devastating outbreaks under different oceanographic conditions

Click emission in Dall’s porpoise Phocoenoides dalli, focusing on physical properties of tissues

Dall’s porpoise (Phocoenoides dalli) is one of most common North Pacific porpoise species, for which information on sound-emitting processes is limited. To evaluate the mechanism of click emission in the head of this porpoise, the distribution of acoustic impedance in head tissues was calculated using density and Young’s modulus‘which is a measure of linear resistance to linear compression. Two Dall’s porpoise heads were examined: one for macroscopic dissection, and one for investigating the distribution of acoustic impedance calculated from CT-measured density, and Young’s modulus measured by creep meter. Acoustic impedance increased from the dorsal bursae to the melon’s emitting surface, with impedance matching observed at the boundary between the emitting surface and seawater, and was more similar in distribution to Young’s modulus than it was to density. The distribution of acoustic impedance differed from that of harbor porpoise (Phocoena phocoena), despite similarities in the sound-producing organs in the heads of Dall’s and harbor porpoises. A comparison of the physical properties of Dall’s and harbor porpoise head tissues suggests that hypertrophic vestibular sacs and an oval emitting surface are common characteristics in Phocoenidae

Fractional-Order LQR and State Observer for a Fractional-Order Vibratory System

The present study uses linear quadratic regulator (LQR) theory to control a vibratory system modeled by a fractional-order differential equation. First, as an example of such a vibratory system, a viscoelastically damped structure is selected. Second, a fractional-order LQR is designed for a system in which fractional-order differential terms are contained in the equation of motion. An iteration-based method for solving the algebraic Riccati equation is proposed in order to obtain the feedback gains for the fractional-order LQR. Third, a fractional-order state observer is constructed in order to estimate the states originating from the fractional-order derivative term. Fourth, numerical simulations are presented using a numerical calculation method corresponding to a fractional-order state equation. Finally, the numerical simulation results demonstrate that the fractional-order LQR control can suppress vibrations occurring in the vibratory system with viscoelastic damping

Unprecedented Outbreak of Harmful Algae in Pacific Coastal Waters off Southeast Hokkaido, Japan, during Late Summer 2021 after Record-Breaking Marine Heatwaves

Unprecedented large-scale harmful algae blooms (HABs) were reported in coastal waters off the south-eastern coast of Hokkaido, Japan, in mid-to-late September 2021, about a month after very intense and extensive marine heatwaves subsided. To understand the physical–biological processes associated with development of the HABs, we conducted analyses via a combination of realistic ocean circulation models, particle-tracking simulations, and satellite measurements. The satellite-derived chlorophyll concentrations (SCCs) and areal extent of the high SCCs associated with the HABs were the highest recorded since 1998. More specifically, the extent of SCCs exceeding 5 or 10 mg m−3 started to slowly increase after 20 August, when the marine heatwaves subsided, intermittently exceeded the climatological daily maximum after late August, and reached record-breaking extremes in mid-to-late September. About 70% of the SCCs that exceeded 10 mg m−3 occurred in places where water depths were <300 m, i.e., coastal shelf waters. The high SCCs were also tightly linked with low-salinity water (e.g., subarctic Oyashio and river-influenced waters). High-salinity subtropical water (e.g., Soya Warm Current water) appeared to suppress the occurrence of HABs. The expansion of the area of high SCCs seemed to be synchronized with the deepening of surface mixed layer depths in subarctic waters on the Pacific shelves. That deepening began around 10 August, when the marine heatwaves weakened abruptly. However, another mechanism was needed to explain the intensification of the SCCs in very nearshore waters off southeast Hokkaido. Particle-tracking simulations based on ocean circulation models identified three potential source areas of the HABs: the Pacific Ocean east of the Kamchatka Peninsula, the Sea of Japan, and the Sea of Okhotsk east of the Sakhalin Island. Different processes of HAB development were proposed because distance, time, and probability for transport of harmful algae from the potential source areas to the study region differed greatly between the three source areas

Evaluation of seafloor environmental characteristics of harvesting ground of a kelp Saccharina longissima using GIS in the Pacific coastal area of eastern Hokkaido, Japan

The characteristics of the seafloor environment of the harvesting grounds of the kelp, Saccharina longissima, were evaluated by spatial analysis using a geographic information system (GIS) in the Pacific coastal area of eastern Hokkaido. The kelp harvesting grounds were formed in water depths ranging from 1.2 m to 9.6 m, slopes ranging from 0° to 16.3°, bottom substrate (coarseness score) ranging from 1.82 to 3.00, bottom current velocities ranging from 0.7 cm/s to 116.4 cm/s, and a maximum slope of 37.6°. These values include the viable environmental conditions for the kelp. The kelp growth parameters estimated from kelp measurement data before the harvesting season were positively related to the bottom current velocity. This suggests that the bottom current velocity has a significant effect on kelp growth. The 58 harvesting grounds were classified into two categories based on their growth: those with high kelp growth and those with low kelp growth. Based on a decision tree model, the differences between the two harvesting ground categories were explained by the bottom current velocity, maximum slope, and bottom substrate. In addition, their specific environmental conditions were also quantified. The quantified environmental conditions were also used to create a potential map for the kelp growth in the harvesting grounds. This study provides an understanding of the environmental characteristics of the kelp harvesting grounds, as well as a procedure for mapping the kelp growth potential, thus contributing to the sustainable use of the kelp resources through kelp harvesting ground management and maintenance.This study was supported by the management expense grants of FRA, Japan and by the commissioned project for the survey on the fisheries infrastructure development of the Fisheries Agency “ Development of Methods for Selecting Sites Suitable for the Kelp Harvesting Grounds Based on the Elucidation of Marine Environmental Conditions Favorable to the Kelp Growth (2017–2019)”