Adsorption-Induced Deformation in Nanopores: Unexpected Results Obtained by Molecular Simulations

International audienceThe adsorption of a fluid in a nanoporous material induces deformations of the solid. The saturating regime, where the solid is filled with liquid, generally exhibits a linear relationship between the liquid pressure and the solid strain. This provides an experimental way to measure the elastic moduli of the solid walls. For large pores, the strain is determined by the pressure of the liquid saturating the pores and the mechanical properties of the porous solid. What happens at the nanometric scale, where liquid/matrix interfacial effects dominate? We have performed molecular simulations of a simple Lennard-Jones fluid confined between deformable nanoplatelets. The simulations provide the deformation of the nanopore as a function of the liquid pressure, in a way similar to what is done experimentally. The results show unexpected interface effects, which could be relevant to experimental data analysis

Molecular dynamics simulation of methane transport in confined organic nanopores with high relative roughness

Understanding and characterizing the transport of shale gas (methane) through the nanopores of kerogens are critical for the accurate prediction of shale gas recovery. However, the key factors that regulate shale gas transport through highly roughened nanopores of shale kerogens are not fully understood. In this work, methane transport in organic nanopores with a high relative roughness is characterized using equilibrium and non-equilibrium molecular dynamics methods. According to our results, the CH mass flux has a linear relationship with the pressure gradient, consistent with previous studies, while the calculated slip lengths and gas fluxes varied with different roughness geometries in the order of sigmoidal ≥ triangular > rectangular. Surface slip flow can be a major contributor to the overall gas flux, but surprisingly, the relative contribution of surface slip flow is independent of the pressure gradient. In contrast, the contributions of both slip flow and the average gas fluxes vary strongly with pore diameters. Typical contributions of the adsorbed layer to the overall gas flux are in the range 20–40% but vary from as high as 74% in a 4-nm pore to as low as 6% in a 16-nm pore. Compared to smooth nanopores, we find that, in nanopores with realistically high degrees of relative roughness, methane confinement in cavities decouples slip flow from the flow in the pore interior, significantly reducing the overall flux.

Molecular dynamics simulation of methane transport in confined organic nanopores with high relative roughness

Understanding and characterizing the transport of shale gas (methane) through the nanopores of kerogens are critical for the accurate prediction of shale gas recovery. However, the key factors that regulate shale gas transport through highly roughened nanopores of shale kerogens are not fully understood. In this work, methane transport in organic nanopores with a high relative roughness is characterized using equilibrium and non-equilibrium molecular dynamics methods. According to our results, the CH4 mass flux has a linear relationship with the pressure gradient, consistent with previous studies, while the calculated slip lengths and gas fluxes varied with different roughness geometries in the order of sigmoidal ≥ triangular > rectangular. Surface slip flow can be a major contributor to the overall gas flux, but surprisingly, the relative contribution of surface slip flow is independent of the pressure gradient. In contrast, the contributions of both slip flow and the average gas fluxes vary strongly with pore diameters. Typical contributions of the adsorbed layer to the overall gas flux are in the range 20–40% but vary from as high as 74% in a 4-nm pore to as low as 6% in a 16-nm pore. Compared to smooth nanopores, we find that, in nanopores with realistically high degrees of relative roughness, methane confinement in cavities decouples slip flow from the flow in the pore interior, significantly reducing the overall flux

Highly Carboxylated Cellulose Nanofibers via Succinic Anhydride Esterification of Wheat Fibers and Facile Mechanical Disintegration

We report herein the preparation of 4–6 nm wide carboxyl-functionalized cellulose nanofibers (CNF) via the esterification of wheat fibers with cyclic anhydrides (maleic, phtalic, and succinic) followed by an energy-efficient mechanical disintegration process. Remarkable results were achieved via succinic anhydride esterification that enabled CNF isolation by a single pass through the microfluidizer yielding a transparent and thick gel. These CNF carry the highest content of carboxyl groups ever reported for native cellulose nanofibers (3.8 mmol g^–1). Compared to conventional carboxylated cellulose nanofibers prepared via Tempo-mediated oxidation of wheat fibers, the present esterified CNF display a higher molar-mass and a better thermal stability. Moreover, highly carboxylated CNF from succinic anhydride esterification were effectively integrated into paper filters for the removal of lead from aqueous solution and are potentially of interest as carrier of active molecules or as transparent films for packaging, biomedical or electronic applications