12 research outputs found

    Mesure de la structure hyperfine de niveaux 6p, 7p, 4f et 5f du 129Xe et 131Xe

    No full text
    The authors have measured the h.f.s. of 5 levels of the 5p5(6p + 7p) configurations, 1 level of the 5p5 4f and 1 level of the 5p5 5f configuration of 129Xe and 131Xe by a level crossing technique.Les auteurs ont mesuré les constantes de structure hyperfine de 5 niveaux des configurations 5p5(6p + 7p), de 1 niveau de la configuration 5p5 4f et de 1 niveau de la configuration 5p5 5f des xénon 129 et 131 par une méthode de croisement de niveaux

    R.F. OPTOGALVANIC DETECTION OF RYDBERG AND AUTOIONIZING LEVELS OF RARE GASES : DIAMAGNETIC BEHAVIOUR OF XENON RYDBERG STATES

    No full text
    Quand un oscillateur R.F. est utilisé pour produire une décharge dans une cellule contenant un gaz, le régime et donc la consommation de l'oscillateur peuvent être très sensibles aux variations d'impédance du plasma, telles que celles résultant de l'excitation laser de transitions entre niveaux d'excitation électronique de l'élément considéré. Ceci constitue le principe de la méthode de détection R.F. optogalvanique que nous appliquons à l'étude de niveaux de Rydberg et autoionisants du krypton et du xénon. On montre dans le cas de niveaux de Rydberg du xénon que la méthode s'applique particulièrement bien à la détection en présence d'un champ magnétique fort.When a R.F. oscillator is used to produce a discharge in a gas cell, the rate and hence the power consumption of the oscillator may be very sensitive to impedance variations of the plasma, such as those induced by laser transition between electronic excitation levels of the considered element. This is the basis of the R.F. optogalvanic detection method which we apply to the study of Rydberg and autoionizing levels of krypton and xenon. It is shown in the case of xenon Rydberg states that the method is especially suitable for detection in presence of a strong magnetic field

    Diamagnetic behaviour of xenon Rydberg states studied by the R.F. optogalvanic method

    No full text
    The diamagnetic behaviour of xenon nf Rydberg states is studied using single-mode dye laser excitation and an R.F. optogalvanic detection method The levels are followed from their zero-field positions, through the inter-l and inter-n diamagnetic mixing regimes, until they reach the zero-field 2P3/2 ionization threshold, where the so-called « quasi Landau » regime is observed and up to 20 cm -1 above this threshold The positions of the dominant lines are found to be in agreement with the results of hydrogenic calculations and with the predictions of a semi-classical approximation.On étudie le comportement diamagnétique d'états de Rydberg nf du xénon au moyen d'une excitation par laser à colorant monomode et de la méthode de détection R.F. optogalvanique. Les niveaux sont suivis depuis leur position en champ nul, au travers des régimes de mélange diamagnétique des l puis des n, jusqu'a ce qu'ils atteignent la limite d'ionisation en champ nul 2P3/2, où l'on observe le régime dit de « quasi Landau » puis jusqu'a environ 20 cm-1 au-delà de cette limite. On vérifie que les positions des raies dominantes sont en accord avec les résultats de calculs effectués sur un modèle hydrogénoïde et avec les prédictions d'une approximation semi-classique

    Mesure par interférométrie optique de facteurs de Landé du xénon

    No full text
    Measurements of gj factors of some excited levels of xenon have been performed with a Fabry-Perot interferometer, using a pure even isotope. Levels 6s[3/2]1, 6p'[3/2]1, 7p[1/2]1, 7p[3/2]1, 7p[3/2]2 and 5f[3/2]1 have been studied from transitions located between 4 800 and 5 800 Å. The precision is near 10-4. The measurements of the three Zeeman sublevels of 5f[3/2]1 level as function of the magnetic field allow a test to be made of a calculation of the wavefunctions of the 5p5 5f configuration.Les facteurs de Landé de quelques niveaux excités du xénon ont été mesurés par interférométrie Fabry-Perot à partir d'un isotope pair. Les niveaux 6s[3/2]1, 6p'[3/2]1, 7p[1/2]1, 7p[3/2]1, 7p[3/2]2 et 5f[3/2]1 ont été étudiés grâce à des transitions comprises entre 4 800 et 5 800 Å. Les précisions sont de quelque 10-4. La mesure du déplacement des trois sous-niveaux Zeeman du niveau 5f[3/2]1 en fonction du champ magnétique permet de tester un calcul des fonctions d'onde de la configuration 5p5 5f

    Melting of Au and Al in nanometer Fe/Au and Fe/Al multilayers under swift heavy ions: A thermal spike study

    No full text
    Knowing that Fe is sensitive to swift heavy ion irradiations whereas Au and Al are not, the behavior of nanometric metallic multilayer systems, like [Fe(3 nm)/Au(x)](y) and [Fe(3 nm)/Al(x)](y) with x ranging between 1 and 10 mn, were studied within the inelastic thermal spike model. In addition to the usual cylindrical geometry of energy dissipation perpendicular to the ion projectile direction, the heat transport along the ion path was implemented in the electronic and atomic sub-systems. The simulations were performed using three different values of linear energy transfer corresponding to 3 MeV/u of Pb-208, Xe-132 and Kr-84 ions. For the Fe/Au system, evidence of appearance of a molten phase was found in the entire Au layer, provided the Au thickness is less than 7 nm and 3 nm for Pb and Xe ions, respectively. For the Fe/Al(x) system irradiated with Pb ions, the Al layers with a thickness less than 4 nm melt along the entire ion track. Surprisingly, the Fe layer does not melt if the Al thickness is larger than 2 nm, although the deposited energy surpasses the electronic stopping power threshold of track formation in Fe. For Kr ions melting does not occur in any of the multilayer systems
    corecore