9,666 research outputs found
Thermal analysis comparison between two random glass fibre reinforced thermoplastic matrix composites bonded by adhesives using microwaves: preliminary results
[Abstract]: This paper compares the thermal analysis of two types of random glass fibre reinforced thermoplastic matrix composites joined by adhesives using microwave energy. Fixed frequency, 2.45 GHz, microwave facility is used to join thirty three percent by weight random glass fibre reinforced polystyrene composite [PS/GF (33%)] and thirty three percent by weight random glass fibre reinforced low density polyethylene composite [LDPE/GF (33%)]. The facility used is shown in Figure 1. With a given power level, the composites were exposed to various exposure times to microwave irradiation. The primer or coupling agent used was 5-minute two-part adhesive. The heat distribution of the samples of the two types of composites was analysed and compared. The relationship between the heat distribution and the lap shear strength of the samples was also compared and discussed
Columbia/Einstein observations of extragalactic X-ray sources
Results are presented of the analysis of data from observations of extragalactic objects with the imaging proportional counter on board the Einstein Observatory. Surveys of normal galaxies, radio galaxies, active galaxies, quasars and BL Lacs, and clusters of galaxies were studied in order to improve the understanding of the origin of the Milky Way Galaxy
Prediction of crushing stress in composite materials
A simple mathematical model for predicting the crushing stress of composite materials was derived and presented in this paper. The present knowledge of fracture mechanics and strength of materials are used as the basis for the model. The fracture mechanics part of the analysis was based on energy release rate approach; the energy release rate, G, of the proposed model was determined by this approach. This energy release rate was based on the Mode I (opening or tensile mode) failure. As for the strength of materials part analysis, buckling theory was used to determine the critical load of the fibre beams. These two engineering concepts were combined to form the equation for the proposed model. The derived equation is a function of the materials properties, geometric and physical parameters of the composite materials. The calculated stresses from the derived equation were compared with experimental data from technical and research papers. Good agreements shown in the results are encouraging and recommendations for future analysis with different modes of failure were also presented. This paper enables engineering designers to predict crushing stress in composite materials with confidence and makes their work more efficient and reliable
Dynamical Linear Response of TDDFT with LDA+U Functional: strongly hybridized Frenkel excitons in NiO
Within the framework of time-dependent density-functional theory (TDDFT), we
derive the dynamical linear response of LDA+U functional and benchmark it on
NiO, a prototypical Mott insulator. Formulated using real-space Wannier
functions, our computationally inexpensive framework gives detailed insights
into the formation of tightly bound Frenkel excitons with reasonable accuracy.
Specifically, a strong hybridization of multiple excitons is found to
significantly modify the exciton properties. Furthermore, our study exposes a
significant generic limitation of adiabatic approximation in TDDFT with hybrid
functionals and in existing Bethe-Salpeter-equation approaches, advocating the
necessity of strongly energy-dependent kernels in future development.Comment: 5 pages, 2 figure
Development of polymer network of phenolic and epoxies resins mixed with linseed oil: pilot study
Epoxy resin was mixed with phenolic resins in different percentages by weight. Composite 40/60 means the proportion by weight of epoxy resin is 40 percent. It was found that only composites 50/50 and 40/60 could be cured in ambient conditions. Dynamic mechanical analysis showed that only these two composites form interpenetrating polymer network. The addition of linseed oil to the two resins results also in the formation of interpenetrating network irrespective of proportion by weight of the resins; the mechanical properties will only be better when the percentage by weight of epoxy resin is higher; the aim of reducing cost and at the same time maintaining the mechanical properties cannot be fully achieved because epoxy resin is much more expensive than its counterpart
The Effect of Wage Subsidies on Piece Rate Workers: Evidence from the Penny Per Pound Program in Florida
This paper studies a fair trade program in which consumers provide a wage subsidy (bonus) to piece-rate tomato pickers. The total subsidy—determined by sales to participating buyers—is divided among workers based on their relative output: a worker who produces more gets a larger share of the bonus. Although seemingly mimicking the existing piece-rate pay scheme, the mechanism associated with the bonus payment is really a relative performance evaluation, as the size of total bonus is exogenous and invariant to workers' effort. Therefore, for a given sized subsidy, the combined total (or per worker average) utility gains would become the largest if the workers keep their efforts at the pre-program level. Empirical analysis shows that worker effort (and hence productivity) increases substantially in response to the program, suggesting that currently, workers' combined gains per dollar of subsidy are not being maximized
An imaging gas scintillation proportional counter for the detection of subkiloelectron-volt X-rays
A large area imaging gas scintillation proportional counter (IGSPC) was constructed for use in X-ray astronomy. The IGSPC consists of a gas scintillation proportional counted (GSPC) with a micron polyprotylene window coupled to a multiwire proportional counter (MWPC) via a calcium fluoride window. Over a sensitive area of 21 cu cm the instrument has a measured energy resolution of 17.5% (FWHM) and 1.9 mm (FWHM) spatial resolution at 1.5 keV
Variable frequency microwave (VFM) processing facilities and application in processing thermoplastic matrix composites
Microwave processing of materials is a relatively new technology advancement alternative that provides new approaches for enhancing material properties as well as economic advantages through energy savings and accelerated product development. Factors that hinder the use of microwaves in materials processing are declining, so that prospect for the development of this technology seem to be very promising. The two mechanisms of orientation polarisation and interfacial space charge polarisation, together with dc conductivity, form the basis of high frequency heating. Clearly, advantages in utilising microwave technologies for processing materials include penetration radiation, controlled electric field distribution and selective and volumetric heating. However, the most commonly used facilities for microwave processing materials are of fixed frequency, e.g. 2.45 GHz. This paper presents a state-of-the-art review of microwave technologies, processing methods and industrial applications, using variable frequency microwave (VFM) facilities. This is a new alternative for microwave processing
- …