11 research outputs found
Industrial wastewater treatment wastes used as oxygen carriers in energy generation processes
The paper contains the results of a study on a promising combustion technology known as chemical looping combustion
(CLC). The main advantage of CLC is the production of a highly concentrated CO2 stream without any energy penalty for
its separation, together with NOx emissions reduction. The objective of this work was to examine novel oxygen carrier
(OC) materials for their practical applications with gaseous fuel/air. We report a simple, economical and environmentally
friendly method for the large-scale synthesis of OCs from wastes. The reactivity tests for OCs made from wastewater from
a coking plant were performed in a thermogravimetric analyser. For selected temperatures, reduction–oxidation cycles
were performed. The effect of temperature on the reaction rates, the effect of waste treatment and the oxygen transport
capacity were determined. The waste material demonstrated good thermal stability and maintained its redox behaviour over
cycling. ICP-OES and XRD data revealed these materials that contained beneficial amounts of Fe species and silicon oxide,
which improved stability. The study showed that these waste materials are excellent examples of raw materials that can
enable a decrease in OC production costs with the additional benefit of the practical management of post-wastewater
sediments from coke oven wastewater plants
Supercritical foaming and impregnation of polycaprolactone and polycaprolactone-hydroxyapatite composites with carvacrol
ProducciĂłn CientĂficaPolycaprolactone (PCL) and polycaprolactone-hydroxyapatite (PCL-HA) scaffolds were produced by foaming in supercritical carbon dioxide (scCO2) at 20 MPa, as well as in one-step foaming and impregnation process using carvacrol as an antibacterial agent with proven activity against Gram-positive and Gram-negative bacteria. The experimental design was developed to study the influence of temperature (40 °C and 50 °C), HA content (10 and 20 wt.%), and depressurization rate (one and two-step decompression) on the foams’ morphology, porosity, pore size distribution, and carvacrol impregnation yield. The characterization of the foams was carried out using scanning electron microscopy (SEM, SEM-FIB), Gay-Lussac density bottle measurements, and Fourier–transform infrared (FTIR) analyses. The obtained results demonstrate that processing PCL and PCL-HA scaffolds by means of scCO2 foaming enables preparing foams with porosity in the range of 65.55–74.39% and 61.98–67.13%, at 40 °C and 50 °C, respectively. The presence of carvacrol led to a lower porosity. At 40 °C and one-step decompression at a slow rate, the porosity of impregnated scaffolds was higher than at 50 °C and two- step fast decompression. However, a narrower pore size distribution was obtained at the last processing conditions. PCL scaffolds with HA resulted in higher carvacrol impregnation yields than neat PCL foams. The highest carvacrol loading (10.57%) was observed in the scaffold with 10 wt.% HA obtained at 50 °C.Narodowe Centrum Nauki (Polonia) - (grant 2018/31/B/ ST8/01826)Agencia Nacional de InvestigaciĂłn y Desarrollo de Chile (ANID) - (project 120130)Programa de Financiamiento Basal para Centros CientĂficos y TecnolĂłgicos de Excelencia - (Project AFB180001
Extremely Stable and Durable Mixed Fe–Mn Oxides Supported on ZrO2 for Practical Utilization in CLOU and CLC Processes
This paper contains the results of research on a promising combustion technology known as chemical looping combustion (CLC) and chemical looping with oxygen uncoupling (CLOU). The remarkable advantages of CLC are, among others, that concentrated CO2 stream can be obtained after water condensation without any energy penalty for its separation or significant decrease of NOx emissions. The objective of this work was to prepare a novel bi-metallic Fe–Mn supported on ZrO2 oxygen carriers. Performance of these carriers for the CLOU and CLC process with nitrogen/air and hard coal/air was evaluated. One-cycle CLC tests were conducted with supported Fe–Mn oxygen carriers in thermogravimetric analyzer utilizing hard coal as a fuel. The effects of the oxygen carrier chemical composition and process temperature on the reaction rates were determined. Our study proved that for CLOU, properties formation of bixbyite and spinel forms are responsible. Among iron ferrites, we concluded that iron-rich compounds such as Fe2MnO4 over FeMn2O4 spinel type oxides are more effective for CLOU applications
Reactivity Study of Bimetallic Fe-Mn Oxides with Addition of TiO<sub>2</sub> for Chemical Looping Combustion Purposes
The objective of the research was to prepare Mn-based materials for use as oxygen carriers and investigate their reactivity in terms of their applicability to energy systems. The family of Fe2O3-MnO2 with the addition of TiO2 was prepared by mechanical mixing method and calcination. Five samples with addition of Fe2O3 (20, 30, 35, and 50 wt.%) to MnO2 (65, 55, 50, 35, and 85 wt.%) with constant amount of inert TiO2 (15 wt.%) were prepared. The performance of TiO2 supported Fe-Mn oxides oxygen carriers with hydrogen/air in an innovative combustion technology known as chemical looping combustion (CLC) was evaluated. Thermogravimetric analysis was used for reactivity studies within a wide temperature range (800–1000 °C). Comprehensive characterization contained multipurpose techniques for newly synthesized materials. Moreover, post-reaction experiments considered morphology analysis by SEM, mechanical strength testing by dynamometry, and crystal phase study by XRD. Based on wide-ranging testing, the F50M35 sample was indicated as the most promising for gaseous fuel combustion via CLC at 850–900 °C temperature
Supercritical Foaming and Impregnation of Polycaprolactone and Polycaprolactone-Hydroxyapatite Composites with Carvacrol
Polycaprolactone (PCL) and polycaprolactone-hydroxyapatite (PCL-HA) scaffolds were produced by foaming in supercritical carbon dioxide (scCO2) at 20 MPa, as well as in one-step foaming and impregnation process using carvacrol as an antibacterial agent with proven activity against Gram-positive and Gram-negative bacteria. The experimental design was developed to study the influence of temperature (40 °C and 50 °C), HA content (10 and 20 wt.%), and depressurization rate (one and two-step decompression) on the foams’ morphology, porosity, pore size distribution, and carvacrol impregnation yield. The characterization of the foams was carried out using scanning electron microscopy (SEM, SEM-FIB), Gay-Lussac density bottle measurements, and Fourier–transform infrared (FTIR) analyses. The obtained results demonstrate that processing PCL and PCL-HA scaffolds by means of scCO2 foaming enables preparing foams with porosity in the range of 65.55–74.39% and 61.98–67.13%, at 40 °C and 50 °C, respectively. The presence of carvacrol led to a lower porosity. At 40 °C and one-step decompression at a slow rate, the porosity of impregnated scaffolds was higher than at 50 °C and two- step fast decompression. However, a narrower pore size distribution was obtained at the last processing conditions. PCL scaffolds with HA resulted in higher carvacrol impregnation yields than neat PCL foams. The highest carvacrol loading (10.57%) was observed in the scaffold with 10 wt.% HA obtained at 50 °C
Actual Trends in the Usability of Biochar as a High-Value Product of Biomass Obtained through Pyrolysis
This review comprehensively examines biochar, an essential material in an era of climate change for reducing carbon dioxide (CO2) emissions into the atmosphere. It is inconspicuous, black, lightweight, and very porous, and is produced through the thermal conversion of biomass. Our literature review highlights biochar’s expansive application possibilities. Firstly, its potential to improve soil quality and sequester CO2 has been examined, as well as its utilization in iron and steel manufacturing to minimize the quantity of coke and ultimately reduce CO2 emissions. In industrial manufacturing, the complete elimination of coke can promote environmental neutrality, which is achieved using biochar from biomass for its extrusion. Furthermore, biochar is becoming increasingly significant in modern energy storage technologies and as an important additive in Pickering emulsions, which are also employed in energy storage systems. Additionally, the use of carbon black is a broad topic, and this review illustrates where it can be successfully utilized, especially in environmentally sensitive areas