Motivating Employee Owners in ESOP Firms: Human Resource Policies and Company Performance

What enables some employee ownership firms to overcome the free rider problem andmotivate employees to improve performance? This study analyzes the role of humanresource policies in the performance of employee ownership companies, using employeesurvey data from 14 companies and a national sample of employee-owners. Between-firmcomparisons of 11 ESOP firms show that an index of human resource policies, nominallycontrolled by management, is positively related to employee reports of co-workerperformance and other good workplace outcomes (including perceptions of fairness, goodsupervision, and worker input and influence). Within-firm comparisons in three ESOP firms,and exploratory results from a national survey, show that employee-owners who participatein employee involvement committees are more likely to exert peer pressure on shirking coworkers.We conclude that an understanding of how and when employee ownership workssuccessfully requires a three-pronged analysis of: 1) the incentives that ownership gives; 2)the participative mechanisms available to workers to act on those incentives; and 3) thecorporate culture which battles against tendencies to free ride.human resources, industrial relations, employee ownership

Use of Imaging Spectrometer Data and Multispectral Imagery for Improved Earthquake Response

Imaging and Applied Optics Technical Digest, 2012Multispectral imagery and imaging spectrometer data are used to develop prototype map products for improved earthquake response. A tiered approach keyed to post-event communications infrastructure is directed at providing critical information to emergency services personnel.This research is supported by the Science and Technology (S&T) Directorate, Department of Homeland Security (DHS). We gratefully acknowledge the participation of emergency responders and managers from the cities and counties of Monterey, Los Angeles, San Diego, and Riverside California. We also appreciate contributions during project definition stage and follow-ups by the California Emergency Management Agency (Cal EMA) and the Federal Emergency Management Agency (FEMA), the U.S. Geological Survey, and DHS. AVIRIS data were acquired by NASA/JPL. The LiDAR data were provided by the Association of Monterey Bay Area Governments, via a USGS grant through the American Reinvestment and Recovery Act of 2009. WV-2 data were provided by the National Geospatial Intelligence Agency (NGA) under the NextView imagery license agreement

Creating a Bigger Pie? The Effects of Employee Ownership, Profit Sharing, and Stock Options on Workplace Performance

This paper uses data from NBER surveys of over 40,000 employees in hundreds of facilities in 14 firms and from employees on the 2002 and 2006 General Social Surveys to explore how shared compensation affects turnover, absenteeism, loyalty, worker effort, and other outcomes affecting workplace performance. The empirical analysis shows that shared capitalism has beneficial effects on all outcomes save for absenteeism and that it has its strongest effects on turnover, loyalty, and worker effort when it is combined with: a) high-performance work policies (employee involvement, training, and job security), b) low levels of supervision, and c) fixed wages that are at or above market level. Most workers report that cash incentives, stock options, ESOP stock, and ESPP participation motivate them to work harder. The interaction of the effects of shared capitalism with other corporate policies suggests that the various shared capitalist and other policies may operate through a latent variable, "corporate culture".

Enhanced pool-boiling heat transfer and critical heat flux on femtosecond laser processed stainless steel surfaces

In this paper, we present an experimental investigation of pool boiling heat transfer on multiscale (micro/nano) functionalized metallic surfaces. Heat transfer enhancement in metallic surfaces is very important for large scale high heat flux applications like in the nuclear power industry. The multiscale structures were fabricated via a femtosecond laser surface process (FLSP) technique, which forms self-organized mound-like microstructures covered by layers of nanoparticles. Using a pool boiling experimental setup with deionized water as the working fluid, both the heat transfer coefficients and critical heat flux were investigated. A polished reference sample was found to have a critical heat flux of 91 W/cm2 at 40 °C of superheat and a maximum heat transfer coefficient of 23,000 W/m2 K. The processed samples were found to have a maximum critical heat flux of 142 W/cm2 at 29 °C and a maximum heat transfer coefficient of 67,400 W/m2 K. It was found that the enhancement of the critical heat flux was directly related to the wetting and wicking ability of the surface which acts to replenish the evaporating liquid and delay critical heat flux. The heat transfer coefficients were also found to increase when the surface area ratio was increased as well as the microstructure peak-to-valley height. Enhanced nucleate boiling is the main heat transfer mechanism, and is attributed to an increase in surface area and nucleation site density

Self‑propelled droplets on heated surfaces with angled self‑assembled micro/nanostructures

Directional and ratchet-like functionalized surfaces can induce liquid transport without the use of an external force. In this paper, we investigate the motion of liquid droplets near the Leidenfrost temperature on functionalized self-assembled asymmetric microstructured surfaces. The surfaces, which have angled microstructures, display unidirectional properties. The surfaces are fabricated on stainless steel through the use of a femtosecond laser-assisted process. Through this process, mound-like microstructures are formed through a combination of material ablation, fluid flow, and material redeposition. In order to achieve the asymmetry of the microstructures, the femtosecond laser is directed at an angle with respect to the sample surface. Two surfaces with microstructures angled at 45° and 10° with respect to the surface normal were fabricated. Droplet experiments were carried out with deionized water and a leveled hot plate to characterize the directional and self-propelling properties of the surfaces. It was found that the droplet motion direction is opposite of that for a surface with conventional ratchet microstructures reported in the literature. The new finding could not be explained by the widely accepted mechanism of asymmetric vapor flow. A new mechanism for a self-propelled droplet on asymmetric three-dimensional self-assembled microstructured surfaces is proposed

Ion Chamber Collection Efficiencies for Proton Spot Scanning Calibration

Charge accumulation was measured under calibration conditions in the spread-out Bragg peak (SOBP) using the calibration bias as well as a range of voltages from 10V to 500V and a Farmer-style ion chamber. Collection efficiency was determined by extrapolating to infinite voltage. Similar measurements were taken in an identical dose distribution with a much shorter spot duration. The impact of each of the three models on calibration was then quantified using the TRS-398 protocol. The collection efficiency for the standard calibration was determined to agree well with the prediction of a continuous beam recombination correction. The standard calibration field was found to persistently agree with a continuous beam recombination correction for much lower operating biases. The collection efficiency result for the short spot duration field did not agree with either the continuous or pulsed-beam correction. Using the incorrect recombination model under the standard calibration conditions resulted in a 0.5% calibration difference. We have determined that our spot scanning system would be most appropriately calibrated using a recombination correction with continuous beam model. Physicists responsible for the calibration of such systems are advised to take measurements described here to correctly identify the applicable recombination model for their clinics.Comment: Submitted December 16, 2015 to Medical Physic

Ground-state depletion for subdiffraction-limited spatial resolution in coherent anti-Stokes Raman scattering microscopy

We theoretically investigate ground-state depletion for subdiffraction-limited spatial resolution in coherent anti-Stokes Raman scattering (CARS) microscopy. We propose a scheme based on ground-state depopulation, which is achieved via a control laser light field incident prior to the CARS excitation light fields. This ground-state depopulation results in a reduced CARS signal generation. With an appropriate choice of spatial beam profiles, the scheme can be used to increase the spatial resolution. Based on the density matrix formalism we calculate the CARS signal generation and find a CARS signal suppression by 75% due to ground-state depletion with a single control light field and by using two control light fields the CARS signal suppression can be enhanced to 94%. Additional control light fields will enhance the CARS suppression even further. In case of a single control light field we calculate resulting CARS images using a computer-generated test image including quantum and detector noise and show that the background from the limited CARS suppression can be removed by calculating difference images, yielding subdiffraction-limited resolution where the resolution achievable depends only on the intensity used

Research in High Energy Physics at Duke University

This is the Closeout Report for the research grant in experimental elementary particle physics, carried out by the Duke University High Energy Physics (HEP) group. We re- port on physics results and detector development carried out under this grant, focussing on the recent three-year grant period (2010 to 2013). The Duke HEP group consisted of seven faculty members, two senior scientists, #12;ve postdocs and eight graduate students. There were three thrusts of the research program. Measurements at the energy frontier at CDF and ATLAS were used to test aspects of elementary particle theory described by the Stan- dard Model (SM) and to search for new forces and particles beyond those contained within the SM. The neutrino sector was explored using data obtained from a large neutrino detector located in Japan, and R & D was conducted on new experiments to be built in the US. The measurements provided information about neutrino masses and the manner in which neutri- nos change species in particle beams. Two years ago we have started a new research program in rare processes based on the Mu2E experiment at Fermilab. This research is motivated by the search for the #22; ! e transition with unprecedented sensitivity, a transition forbidden in the standard model but allowed in supersymmetric and other models of new physics. The high energy research program used proton and antiproton colliding beams. The experiments were done at the Fermilab Tevatron (proton-antiproton collisions at a center of mass energy of 1.96 TeV) and at the CERN Large Hadron Collider (proton-proton collisions at 7-8 TeV). The neutrino program used data obtained from the Super-Kamiokande detec- tor. This water-#12;lled Cherenkov counter was used to detect and measure the properties of neutrinos produced in cosmic ray showers, and from neutrino beams produced from acceler- ators in Japan. The Mu2E experiment will use a special stopped muon beam to be built at Fermilab

Digital writing technologies in higher education : theory, research, and practice

This open access book serves as a comprehensive guide to digital writing technology, featuring contributions from over 20 renowned researchers from various disciplines around the world. The book is designed to provide a state-of-the-art synthesis of the developments in digital writing in higher education, making it an essential resource for anyone interested in this rapidly evolving field. In the first part of the book, the authors offer an overview of the impact that digitalization has had on writing, covering more than 25 key technological innovations and their implications for writing practices and pedagogical uses. Drawing on these chapters, the second part of the book explores the theoretical underpinnings of digital writing technology such as writing and learning, writing quality, formulation support, writing and thinking, and writing processes. The authors provide insightful analysis on the impact of these developments and offer valuable insights into the future of writing. Overall, this book provides a cohesive and consistent theoretical view of the new realities of digital writing, complementing existing literature on the digitalization of writing. It is an essential resource for scholars, educators, and practitioners interested in the intersection of technology and writing