Environmental projects implementation effectiveness in business structures within the corporate social responsibility

Rapid economic growth impacts our environment and consequently ecosystem services greatly. Recognizing the value and the need for conservation of ecosystem services is essential to business, the latter can reduce the risks as well as provide new opportunities for further development. It is quite possible that business can become a leading sector in environmental protection. As social corporate responsibility (CSR) in Ukraine becomes more and more popular, companies implement projects on energy efficiency, climate change, green building, and biodiversity conservation. However, the projects’ effectiveness should undergo assessment in order to prevent green-washing. This research aims at evaluating the companies’ performance in environmental projects implementation within the CSR. Its another attempt is to prove that environmental projects are a new trend that could become an effective tool for environmental protection

The risk mitigation strategy taxonomy and generated risk event effect neutralization method

In the design of new products and systems, the mitigation of potential failures is very important. The sooner in a product\u27s design mitigation can be performed, the lower the cost and easier to implement those mitigations become. However, currently, most mitigations strategies rely on the expertise of the engineers designing a product, and while models and for failure modes do exist to help, there are no guidelines for performing product changes to reduce risk. To help alleviate this, the risk mitigation strategy taxonomy is created from an empirical collection of mitigation strategies used in industry for failure mitigation, creating a consistent set of definitions for electromechanical risk mitigation strategies. By storing mitigation data in this consistent format, the data can be used to evaluate and compare different mitigation strategies. Applying this, the Generated Risk Event Effect Neutralization (GREEN) method is used to generate mitigation strategies for a product during the conceptual design of the product, where changes are the easiest to implement and cost the least. The GREEN method then compares and selects the best strategy based on the popularity, likelihood change, and consequence change that result from implementing the strategies --Abstract, page iv

Research and development in cds photovoltaic film cells third quarterly report, nov. 19, 1964 - feb. 19, 1965

Cadmium sulfide photovoltaic film cell

Research and development in cds photovoltaic film cells final report

Fabrication of lightweight, flexible, high efficiency, low cost, thin film, cadmium sulfide solar cells to operate for long periods in space without appreciable degradatio

Breaking the Cycle-Preventing Failures by Leveraging Historical Data During Conceptual Design

Major engineering accidents are often caused by seemingly minor failures propagating through complex systems. One example of this is an accident involving a Bell 206 Rotorcraft where a fuel pump failure led to the severing of the tail boom. Cataloguing and communicating the knowledge of potential failures and failure propagations is critical to prevent further accidents. The need for effective failure prevention tools is not specific to rotorcrafts, however. Failure reporting systems have been adopted by various industries to aid and promote failure prevention. The catalogued failures usually consist of narratives describing which part of a product failed, how it failed, and the circumstances behind the failure. While this information is vital to learning from past mistakes; often, the narratives are designed simply to report the events, not to use the data for product improvements or new designs. Therefore, more effective systems for cataloguing and utilizing corporate memory of recorded failure events are needed. This paper presents the design of a computational database to support the failure prevention tool, the function based failure propagation (FFP) method. FFP promotes failure prevention by identifying failure propagation paths through a system as early as the conceptual phase of product design, where impacts of failure prevention are greatest. It uses a database populated by historical failure information to present specific paths that potential failures might take as they propagate through a system. The information communicated by the FFP method is the potential location of and likelihood failure propagations

Function-Based Failure Propagation for Conceptual Design

When designing a product, the earlier the potential risks can be identified, the more costs can be saved, as it is easier to modify a design in its early stages. Several methods exist to analyze the risk in a system, but all require a mature design. However, by applying the concept of “common interfaces” to a functional model and utilizing a historical knowledge base, it is possible to analyze chains of failures during the conceptual phase of product design. This paper presents a method based on these common interfaces to be used in conjunction with other methods such as risk in early design to allow a more complete risk analysis during the conceptual design phase. Finally, application of this method is demonstrated in a design setting by applying it to a thermal control subsystem

Acceleration with Self-Injection for an All-Optical Radiation Source at LNF

We discuss a new compact gamma-ray source aiming at high spectral density, up to two orders of magnitude higher than currently available bremsstrahlung sources, and conceptually similar to Compton Sources based on conventional linear accelerators. This new source exploits electron bunches from laser-driven electron acceleration in the so-called self-injection scheme and uses a counter-propagating laser pulse to obtain X and gamma-ray emission via Thomson/Compton scattering. The proposed experimental configuration inherently provides a unique test-bed for studies of fundamental open issues of electrodynamics. In view of this, a preliminary discussion of recent results on self-injection with the FLAME laser is also given.Comment: 8 pages, 10 figures, 44 references - Channeling 2012 conferenc

Loss of Stathmin-2, a hallmark of TDP-43-associated ALS, causes motor neuropathy

TDP-43 mediates proper Stathmin-2 (STMN2) mRNA splicing, and STMN2 protein is reduced in the spinal cord of most patients with amyotrophic lateral sclerosis (ALS). To test the hypothesis that STMN2 loss contributes to ALS pathogenesis, we generated constitutive and conditional STMN2 knockout mice. Constitutive STMN2 loss results in early-onset sensory and motor neuropathy featuring impaired motor behavior and dramatic distal neuromuscular junction (NMJ) denervation of fast-fatigable motor units, which are selectively vulnerable in ALS, without axon or motoneuron degeneration. Selective excision of STMN2 in motoneurons leads to similar NMJ pathology. STMN2 knockout heterozygous mice, which better model the partial loss of STMN2 protein found in patients with ALS, display a slowly progressive, motor-selective neuropathy with functional deficits and NMJ denervation. Thus, our findings strongly support the hypothesis that STMN2 reduction owing to TDP-43 pathology contributes to ALS pathogenesis

Time evolution of stimulated Raman scattering and two-plasmon decay at laser intensities relevant for shock ignition in a hot plasma

Laser–plasma interaction (LPI) at intensities 1015–1016 W cm2 is dominated by parametric instabilities which can be responsible for a significant amount of non-collisional absorption and generate large fluxes of high-energy nonthermal electrons. Such a regime is of paramount importance for inertial confinement fusion (ICF) and in particular for the shock ignition scheme. In this paper we report on an experiment carried out at the Prague Asterix Laser System (PALS) facility to investigate the extent and time history of stimulated Raman scattering (SRS) and two-plasmon decay (TPD) instabilities, driven by the interaction of an infrared laser pulse at an intensity 1:2 1016 W cm2 with a 100 mm scalelength plasma produced from irradiation of a flat plastic target. The laser pulse duration (300 ps) and the high value of plasma temperature (4 keV) expected from hydrodynamic simulations make these results interesting for a deeper understanding of LPI in shock ignition conditions. Experimental results show that absolute TPD/SRS, driven at a quarter of the critical density, and convective SRS, driven at lower plasma densities, are well separated in time, with absolute instabilities driven at early times of interaction and convective backward SRS emerging at the laser peak and persisting all over the tail of the pulse. Side-scattering SRS, driven at low plasma densities, is also clearly observed. Experimental results are compared to fully kinetic large-scale, two-dimensional simulations. Particle-in-cell results, beyond reproducing the framework delineated by the experimental measurements, reveal the importance of filamentation instability in ruling the onset of SRS and stimulated Brillouin scattering instabilities and confirm the crucial role of collisionless absorption in the LPI energy balance

Identifiable Acetylene Features Predicted for Young Earth-like Exoplanets with Reducing Atmospheres Undergoing Heavy Bombardment

The chemical environments of young planets are assumed to be largely influenced by the impacts of bodies lingering on unstable trajectories after the dissolution of the protoplanetary disk. We explore the chemical consequences of impacts within the context of reducing planetary atmospheres dominated by carbon monoxide, methane, and molecular nitrogen. A terawatt high-power laser was selected in order to simulate the airglow plasma and blast wave surrounding the impactor. The chemical results of these experiments are then applied to a theoretical atmospheric model. The impact simulation results in substantial volume mixing ratios within the reactor of 5% hydrogen cyanide (HCN), 8% acetylene (C2H2), 5% cyanoacetylene (HC3N), and 1% ammonia (NH3). These yields are combined with estimated impact rates for the early Earth to predict surface boundary conditions for an atmospheric model. We show that impacts might have served as sources of energy that would have led to steady-state surface quantities of 0.4% C2H2, 400 ppm HCN, and 40 ppm NH3. We provide simulated transit spectra for an Earth-like exoplanet with this reducing atmosphere during and shortly after eras of intense impacts. We predict that acetylene is as observable as other molecular features on exoplanets with reducing atmospheres that have recently gone through their own "heavy bombardments," with prominent features at 3.05 and 10.5 μm