Recent results of studies of magnetic field distribution and neutron scaling on PF-1000 and PF-3 facilities

The recent results of studies of the magnetic field distribution and the neutron yield scaling in two largest plasma focus facilities, PF-3 and PF-1000 is done. The power-law dependence of the neutron yield on the current in the imploding plasma sheath has been demonstrated experimentally. For the first time the presence of the Вz magnetic field components is experimentally shown. In the compression stage, the axial component of the magnetic field reaches several kG that comprises ~10 % of the azimuthal component. The presence of the Bz field is a powerful argument in favor of the existence of closed magnetic configurations, which play an important role in the generating of neutrons.Представлены результаты последних исследований распределения магнитного поля и скейлинга нейтронного выхода на двух крупнейших плазмофокусных установках ПФ-3 и ПФ-1000. Экспериментально показана степенная зависимость нейтронного выхода от величины тока в сжимающейся плазменной оболочке. Впервые экспериментально показано наличие Вz-компоненты магнитного поля. В стадии сжатия величина аксиальной компоненты магнитного поля достигает нескольких килограмм-сил, что составляет ~ 10% от величины азимутальной компоненты. Наличие Bz-поля является весомым аргументом в пользу существования замкнутых магнитных конфигураций, играющих важную роль в механизме генерации нейтронов.Представлено результати останніх досліджень розподілу магнітного поля і скейлінга нейтронного вихoдy на двох найбільших плазмофокусних установках ПФ-3 та ПФ-1000. Експериментально показана ступенева залежність нейтронного виходу від величини струму в плазмовїй оболонці, що стикається. Вперше експериментально показано наявність Вz-компоненти магнітного поля. У стадії стиснення величина аксіальної компоненти магнітного поля досягає декількох кілограм-сил, що складає ~ 10 % від величини азимутальної компоненти. Наявність Вz-поля є вагомим аргументом на користь існування замкнутих магнітних конфігурацій, що мають неаби яку роль у механізмі генерації нейтронів

Biological-effective versus conventional dose volume histograms correlated with late genitourinary and gastrointestinal toxicity after external beam radiotherapy for prostate cancer: a matched pair analysis

BACKGROUND: To determine whether the dose-volume histograms (DVH's) for the rectum and bladder constructed using biological-effective dose (BED-DVH's) better correlate with late gastrointestinal (GI) and genitourinary (GU) toxicity after treatment with external beam radiotherapy for prostate cancer than conventional DVH's (C-DVH's). METHODS: The charts of 190 patients treated with external beam radiotherapy with a minimum follow-up of 2 years were reviewed. Six patients (3.2%) were found to have RTOG grade 3 GI toxicity, and similarly 6 patients (3.2%) were found to have RTOG grade 3 GU toxicity. Average late C-DVH's and BED-DVH's of the bladder and rectum were computed for these patients as well as for matched-pair control patients. For each matched pair the following measures of normalized difference in the DVH's were computed: (a) δ(AUC )= (Area Under Curve [AUC] in grade 3 patient – AUC in grade 0 patient)/(AUC in grade 0 patient) and (b) δ(V60 )= (Percent volume receiving = 60 Gy [V60] in grade 3 patient – V60 in grade 0 patient)/(V60 in grade 0 patient). RESULTS: As expected, the grade 3 curve is to the right of and above the grade 0 curve for all four sets of average DVH's – suggesting that both the C-DVH and the BED-DVH can be used for predicting late toxicity. δ(AUC )was higher for the BED-DVH's than for the C-DVH's – 0.27 vs 0.23 (p = 0.036) for the rectum and 0.24 vs 0.20 (p = 0.065) for the bladder. δ(V60 )was also higher for the BED-DVH's than for the C-DVH's – 2.73 vs 1.49 for the rectum (p = 0.021) and 1.64 vs 0.71 (p = 0.021) for the bladder. CONCLUSIONS: When considering well-established dosimetric endpoints used in evaluating treatment plans, BED-DVH's for the rectum and bladder correlate better with late toxicity than C-DVH's and should be considered when attempting to minimize late GI and GU toxicity after external beam radiotherapy for prostate cancer

Manufacturing technology of AS-SOFC prepared with different commercially available precursors

Fuel cells are devices converting the chemical energy into the electrical energy and heat as result of the electrochemical reaction between gaseous fuel and a gas oxidant in flameless combustion process. Because of omission of thermo-mechanical steps that are present in any traditional energy conversion technology (e.g. gas turbine) fuel cells show increased efficiency in comparison. Compact sizes and modular scalability predestines this technology for distributed energy generation including but not limited to renewable energy sources (e.g. wind, solar). Fuel cells technology also addresses other very important part of distributed renewable energy generation. Because of the unreliable energy production rates and the usual for renewable energy sources mismatch between energy supply and demand, some sort of energy storage is needed to store surplus of produced energy and release it when needed. Reversible fuel cells, that generate hydrogen from available surplus of energy and then generate energy from that stored fuel when needed are cheaper and more ecologically friendly alternative to usually used batteries. This technology is still under development, including research at IEn OC CEREL. In the early development of reversible fuel cells, new types of nickel oxide and porosity forming carbon was evaluated for this task. This work compares the electrical and mechanical parameters of SOFC manufactured with JT Backer NiO and Carbon Polska carbon with cells made from other commercially available materials. Based on evaluated quality, purity, availability and cost, following materials were selected for comparison: Novamet NiO, 99,9 % pure, grain size 1-2 µm and Aldrich carbon with parameters similar to graphite used previously. Preliminary tests show clear changes in the microstructural, mechanical and electrical parameters

Project of tramway network as part a passenger service system in Radom agglomeration

Komunikacja miejska w Radomiu, powstała w latach pięćdziesiątych XX w., opiera się w zasadniczym stopniu na jednym systemie przewozowym, tzn. na autobusach. System ten wprowadzony do obsługi centrum miasta i dzielnic poza centrum (osiedli mieszkaniowych i zakładów pracy) obejmował początkowo kilka linii. Jego efektywność zmniejszała się coraz bardziej w miarę rozwoju przemysłu i zaludnienia miasta

Transport wewnętrzny jako integralna część logistyki w produkcji. Cz. 1

The article describes the division and functions of internal transport in production logistics and internal transport systems. Its characteristics and main assumptions were presented. An internal transport analysis of the selected manufacturing company was performed. Selected results of the research in the production company were presented using the PFMEA method. Through the use of PFMEA analysis, the causes of the errors encountered during transport in the company were identified and corrective measures proposed, so that the transport system fulfills its role, does not interfere with the production process, and ensures safe movement of cargo.W artykule opisano podział i funkcje transportu wewnętrznego w logistyce produkcji oraz systemy transportu wewnętrznego. Dokonano jego charakterystyki i przedstawiono główne założenia. Dokonano analizy transportu wewnętrznego wybranego przedsiębiorstwa produkcyjnego. Zaprezentowano wybrane wyniki badań w przedsiębiorstwie produkcyjnym wykorzystując między innymi metodę PFMEA. Poprzez zastosowanie analizy PFMEA zidentyfikowano przyczyny błędów występujących podczas transportu w przedsiębiorstwie oraz zaproponowano działania korygujące, tak aby system transportu spełniał swoją rolę, nie zakłócał procesu produkcji, jak również zapewniał bezpieczne przemieszczanie ładunków

ZrO2 Gelcast Foams Coated with Apatite Layers

In this work, gel-casting of foams method was used to produce ZrO2 porous ceramics. The obtained foams with total porosity of 89.5 vol% were composed of approximately spherical cells having the mean diameter of 537 ± 153 μm interconnected by circular cell windows having the mean diameter of 152 ± 82 μm. Next, the ZrO2 foams were coated with fluorapatite (FA) and hydroxyapatite (HA) layers by slurry infiltration. The intermediate fluorapatite (FA) layer was introduced to prevent the chemical reactions between ZrO2 and HA at high temperatures during sintering process. The ZrO2 samples containing only HA coatings, were also tested, for comparison. The obtained ceramic biomaterials were subjected to in vitro tests in the simulated body fluid (SBF) solution. The results show that the ZrO2 foams with FA/HA layers possessed better bioactivity than the foams with the HA/HA coating