23 research outputs found

    Detecting the translocation of DNA through a nanopore using graphene nanoribbons

    Get PDF
    Solid-state nanopores can act as single-molecule sensors and could potentially be used to rapidly sequence DNA molecules. However, nanopores are typically fabricated in insulating membranes that are as thick as 15 bases, which makes it difficult for the devices to read individual bases. Graphene is only 0.335 nm thick (equivalent to the spacing between two bases in a DNA chain) and could therefore provide a suitable membrane for sequencing applications. Here, we show that a solid-state nanopore can be integrated with a graphene nanoribbon transistor to create a sensor for DNA translocation. As DNA molecules move through the pore, the device can simultaneously measure drops in ionic current and changes in local voltage in the transistor, which can both be used to detect the molecules. We examine the correlation between these two signals and use the ionic current measurements as a real-time control of the graphene-based sensing device

    Large-area epitaxial monolayer MoS2

    Get PDF
    Two-dimensional semiconductors such as MoS2 are an emerging material family with wide-ranging potential applications in electronics, optoelectronics, and energy harvesting. Large-area growth methods are needed to open the way to applications. Control over lattice orientation during growth remains a challenge. This is needed to minimize or even avoid the formation of grain boundaries, detrimental to electrical, optical, and mechanical properties of MoS2 and other 2D semiconductors. Here, we report on the growth of high-quality monolayer MoS2 with control over lattice orientation. We show that the monolayer film is composed of coalescing single islands with limited numbers of lattice orientation due to an epitaxial growth mechanism. Optical absorbance spectra acquired over large areas show significant absorbance in the high-energy part of the spectrum, indicating that MoS2 could also be interesting for harvesting this region of the solar spectrum and fabrication of UV-sensitive photodetectors. Even though the interaction between the growth substrate and MoS2 is strong enough to induce lattice alignment via van der Waals interaction, we can easily transfer the grown material and fabricate devices. Local potential mapping along channels in field-effect transistors shows that the single-crystal MoS2 grains in our film are well connected, with interfaces that do not degrade the electrical conductivity. This is also confirmed by the relatively large and length-independent mobility in devices with a channel length reaching 80um

    [Autosexing maternal form of meat-type chickens] Аутосексная материнская форма мясных кур

    No full text
    Бондаренко, Ю.В.; Сергеева, В.Д.; Куранова, Э.Н.; Романов, М.Н.; Красножон, С.А. Создание аутосексной материнской родительской формы мясных кур, обеспечивающей возможность разделения суточных цыплят по полу в зависимости от скорости роста зачатков маховых перьев (локус K). Опыты проведены в опытном хозяйстве им. Ф.Э. Дзержинского Крымского отделения УкрНИИП. Исходным материалом при создании аутосексной материнской формы мясных кур послужили линия Б-9 кросса Бройлер-6 и линия П-3 американского происхождения (фирма "Арбор Эйкрз"). Обе линии относятся к породе плимутрок. Типы оперяемости цыплят (локус K) определяли в течение первых суток жизни по относительной длине зачатков маховых перьев и кроющих перьев по Самсу и МакГиббону. У ранооперяющихся цыплят (ген k) зачатки маховых перьев длиннее, чем кроющих. Всего в суточном возрасте фенотипировано 35290 особей линии П-3,12793 - линии Б-9 и 1738 гибридных цыплят - Б-9 × П-3. Точность аутосексирования определяли по результатам убоя и вскрытия брюшной полости птицы в целях обследования их внутренних половых органов. Всего исследовано 458 цыплят. Разработаны следующие методические приемы выведения аутосексных комбинаций кур: выделение трех подтипов поздней оперяемости суточного молодняка, сочетание отбора цыплят по фенотипу с отбором производителей по генотипу, определение генотипа отцов по локусу K при получении племенного молодняка. Выведена аутосекская материнская форма мясных кур, обеспечивающая 97,25% точности деления гибридных цыплят по полу. Куры линии П-3 - носители генов ранней и поздней оперяемости цыплят - обладали сходными показателями продуктивности. От кур аутосексной материнской формы Б-9 × П-3 за 420 дн. жизни получено по 152 яйца на среднюю несушку. Выход цыплят на несушку составил 115 гол., что на 5,7 гол. меньше, чем у кур линии П-3. (Л. Благообразова
    corecore