Stark Broadening of in III Lines in Astrophysical and Laboratory Plasma

Besides the need of Stark broadening parameters for a number of problems in physics, and plasma technology, in hot star atmospheres the conditions exist where Stark widths are comparable and even larger than the thermal Doppler widths. Using the semiclassical perturbation method we investigated here the influence of collisions with charged particles for In III spectral lines. We determined a number of Stark broadening parameters important for the investigation of plasmas in the atmospheres of A-type stars and white dwarfs. Also, we have compared the obtained results with existing experimental data. The results will be included in the STARK-B database, the Virtual Atomic and Molecular Data Center and the Serbian Virtual Observatory

Normal Rack Grid Generation Method for Screw Machines with Large Helix Angles

Improving the efficiency of the screw machine is highly significant for industry. Numerical simulation is an important tool in developing these machines. The 3D computational fluid dynamic simulation can give a valuable insight into the flow parameters of screw machines. However, it is currently difficult to generate high quality computational grids required for screw rotors with large helix angle. This is mainly due to the excessively high cell skewness of the rotors with large helix angel, which would introduce errors in numerical simulation. This paper presents a novel grid generation algorithm used for the screw rotors with large helix angel. This method is based on the principles developed for the grid generation in transverse cross-section. Such mesh is generated by SCORGTM using normal rack grid generation method which means numerical meshes are generated in a plane normal to the pitch helix line. The mesh lines are then parallel to the helix line and thus an orthogonal mesh will be produced. The main flow and leakage flow directions are orthogonal to the mesh, potentially reducing numerical diffusion. This developed algorithm could also be employed for single screw machines

The flux ratio of the [OIII] 5007,4959 lines in AGN: Comparison with theoretical calculations

By taking into account relativistic corrections to the magnetic dipole operator, the theoretical [OIII] 5006.843/4958.511 line intensity ratio of 2.98 is obtained. In order to check this new value using AGN spectra we present the measurements of the flux ratio of the [OIII] 4959,5007 emission lines for a sample of 62 AGN, obtained from the Sloan Digital Sky Survey (SDSS) Database and from published observations. We select only high signal-to-noise ratio spectra for which the line shapes of the [OIII] 4959,5007 lines are the same. We obtained an averaged flux ratio of 2.993 +/- 0.014, which is in a good agreement with the theoretical one.Comment: Accepted for publication in the MNRA

Experimental Investigation of the Transient Flow in Roots Blower

Rotary positive displacement machines are common method to pump flow in various process industries. Their performance highly depends on the operational clearances. It is widely believed that computational fluid dynamics (CFD) can help understanding and reducing internal leakage flows. However, Developments of grid generating tools for use of CFD in rotary positive displacement machines have not yet been fully validated. Thereby arising a need to validate these models that help in better understanding of the leakage flows. Roots blower is a good representative of positive displacement machines and as such is convenient for optical access to analyse flows in in such machines. This paper describes the setup of the experimental test rig with the optical Roots blower in the Centre for Compressor Technology at City, University of London and the first results obtained using three different flow visualization methods. These are namely i) the high-speed camera (HC), ii) the continuous time resolved PIV (CPIV) and iii) the instantaneous PIV obtained with double pulse PIV laser and double shutter camera (IPIV). Test results from these three tests are compared and discussed in the paper. The CPIV test shows the movement of the vortex and the general shape of the flow field clearly but is not sufficient to calculate velocity vectors of high-velocity particles due to the limitation of the laser and camera. The IPIV test can produce quantitative velocity vector images of the internal flow but needs improvement to look into the leakage flow. The work described in this paper is a part of the large project set to evaluate characteristics of the internal flow in rotary positive displacement machines and to characterize leakage flows. The objective is to enable further improvements in 3D CFD analysis of leakage flows in rotary positive displacement machines and ultimately lead to the improvement in the performance of rotary positive displacement machines

Development and Design of Energy Efficient Oil-Flooded Screw Compressors

It is estimated that about 17% of the world's generated power is used for compression. Thus all, even minor improvement of the efficiency of compressors will substantially reduce CO2 emission. This paper presents development of family of energy efficient oil-flooded screw compressors for Kirloskar Pneumatic Company Ltd. The developmental techniques adopted to improve efficiency such as introduction of superior 'N' rotor profile, rotor clearance management, performance calculation using 3D CCM (Computational Continuum Mechanics), direct parametric interface to CAD (Computer Aided Design), which contains bearing selection for complete 3D solid modelling. Also, contemporary prototyping and experimental investigation is supported by the fully computerised data acquisition and processing. The cumulative improvement of all these elements of the design process resulted in a very efficient machine which guarantees the competitive position of Kirloskar Pneumatic Company Limited in the screw compressor market

Numerical and Experimental Analysis of Transient Flow in Roots Blower

The performance of rotary positive displacement machines highly depends on the operational clearances. It is widely believed that computational fluid dynamics (CFD) can help understanding internal leakage flows. Developments of grid generating tools for analysis of leakage flows by CFD in rotary positive displacement machines have not yet been fully validated. Roots blower is a good representative of positive displacement machines and as such is convenient for optical access in order to analyse internal flows. The experimental investigation of flow in optical roots blower by phase-locked PIV (Particle Image Velocimetry) performed in the Centre for Compressor Technology at City, University of London provided the velocity field suitable for validation of the simulation model. This paper shows the results of the three-dimensional CFD transient simulation model of a Roots blower with the dynamic numerical grids generated by SCORG and flow solution solved in ANSYS CFX flow solver to obtain internal flow patterns. The velocity fields obtained by simulation agree qualitatively with the experimental results and show the correct main flow features in the working chamber. There are some differences in the velocity magnitude and vortex distribution. The flow field in roots blower is highly turbulent and three-dimensional. The axial clearances should be included, and the axial grids should be refined in the simulation method. The paper outlines some directions for future simulation and experimental work. The work described in this paper is a part of the large project set to evaluate characteristics of the internal flow in rotary positive displacement machines and to characterize leakage flow

User defined nodal displacement of numerical mesh for analysis of screw machines in FLUENT

Growing demands to reduce energy consumption are driving researchers towards in-depth analysis of positive displacement machines. Twin screw compressors are amongst the most common types of positive displacement machines. These machines have inherently complex geometry due to intricate rotor profiles used. As the details of the internal flows are difficult to obtain experimentally, Computational Fluid Dynamics (CFD) offers a good alternative for evaluation of internal flow patterns. However, implementation of CFD is challenging due complex deforming geometries. In this paper, a customised grid generator SCORGTM developed by authors is used to generate numerical meshes for commercially available solver ANSYS FLUENT. FLUENT is an unstructured solver which offers flexibility of using both segregated and coupled solution algorithms. Segregated algorithms are generally faster which results in shorter product development time. Interface with FLUENT is implemented by performing User Defined Nodal Displacements (UDND) of grids generated by SCORG in a parallel framework. For this purpose, SCORG and UDND are coupled and extended to work with FLUENT's parallel architecture. The developed code is compiled within the solver. The oil free air screw compressor with 'N' profile rotors and 3/5 lobe combination is modelled for 8000 RPM and 6000 RPM. Finally, the predicted performance values with FLUENT are compared to previously calculated CFX predictions and experimental results. FLUENT requires shorter solution time to obtain same accuracy of CFX

Analysis of rolling bearing power loss models for twin screw oil injected compressor

The mechanical losses inside a screw compressor limit the performance of the compressor in terms of efficiency. These losses arise due to relative motion between elements inside the screw compressor. The estimation of mechanical losses predicted in the literature is around 10-15% of the total shaft power. One of the elements which contribute significantly to these losses is rolling element bearings. There are numerous mathematical models available which predict power losses in the rolling bearings. The objective of this paper is to study different models to predict power loss for rolling bearings and to predict the power losses for the bearings used for oil injected, twin screw compressor. A comparison between different power loss models for different operating conditions of compressor is also presented in this paper and results of analysis are compared with available experimental observations. The analysis helps to determine suitable power loss model for different operating conditions and more realistic predictions of the power losses. This allows designers for more accurate estimation of the performance of screw compressors

Simplified Production of Large Prototypes using Visible Slicing

Rapid Prototyping (RP) is a totally automatic generative manufacturing technique based on a “divide-and-conquer” strategy called ‘slicing’. Simple slicing used on 2.5-axis kinematics of the existing RP machines is responsible for the staircase error. Although thinner slices will have less error, the slice thickness has practical limits. Visible Slicing overcomes these limitations. A few visible slices exactly represent the object. Each visible slice can be realized using a 3- axis kinematics machine from two opposite directions. Visible slicing is implemented on Segmented Object Manufacturing (SOM) machine under development. SOM can produce soft large prototypes faster and cheaper with accuracy comparable to that of CNC machining.Mechanical Engineerin