Diffusion and phase change characterization by mass spectrometry

The high temperature diffusion of trace elements in metals and alloys was investigated. Measurements were made by high sensitivity mass spectrometry in which individual atoms were detected, and quantitative data was obtained for zircaloy-2, 304 stainless steel, and tantalum. Additionally, a mass spectrometer was also an analytical tool for determining an allotropic phase change for stainless steel at 955 C, and a phase transition region between 772 C and 1072 C existing for zircaloy-2. Diffusion rates were measured in thin (0.001" (0.0025 cm) and 0.0005" (0.0013 cm)) ribbons which were designed as high temperature thermal ion sources, with the alkali metals as naturally occurring impurities. In the temperature and pressure regime where diffusion measurements were made, the solute atoms evaporated from the ribbon filaments when the impurities diffused to the surface, with a fraction of these impurity atoms ionized according to the Langmuir-Saha relation. The techniques developed can be applied to many other alloys important to space vehicles and supersonic transports; and, with appropriate modifications, to the diffusion of impurities in composites

A feasibility study of ion implantation techniques for mass spectrometer calibration

An experimental study was undertaken to examine the feasibility of using ion-implanted filaments doped with either an alkali metal or noble gas for in situ recalibration of onboard mass spectrometers during extended space missions. Implants of rubidium and krypton in rhenium ribbon filaments were subsequently tested in a bakeable 60 deg sector mass spectrometer operating in the static mode. Surface ionization and electron impact ion sources were both used, each yielding satisfactory results. The metallic implant with subsequent ionization provided a means of mass scale calibration and determination of system operating parameters, whereas the noble gas thermally desorbed into the system was more suited for partial pressure and sensitivity determinations

The Addition of EI/CI Capability to the Mattauch-herzog Spectrograph with EOID

A modification was made to the Mattauch-Herzog Spectrograph with an electro-optical ion detector (EOID) previously designed and constructed, so that it would be capable of operating not only in the electron-impact (EI) mode of ionization, but also in the chemical ionization (CI) mode. This modification necessitated an effort in three specific design areas: (1) sample inlet; (2) ion source and analyzer regions; and (3) the pumping system. In addition, an appropriate electronics package had to be designed to control and operate the combined EI/CI source

Infection rates after 3175 total hip and total knee replacements performed with and without a horizontal unidirectional filtered air-flow system

To determine the effect of the ventilation system on infection rates after total hip and total knee arthroplasties performed in operating rooms with and without a horizontal unidirectional filtered air-flow system, using modern antiseptic conditions and antibiotic prophylaxis, all of the single-stage procedures (3175 of a total of 4769) were subjected to statistical analysis and fifty-seven matched pairs for controls were established. A reduced infection rate after total hip replacement (from 1.4 to 0.9 per cent) and an increased infection rate after total knee replacement (from 1.4 to 3.9 per cent) were found when patients operated on in the filtered laminar air-flow operating room were compared with those whose operations were done in two conventional rooms. This pattern was statistically significant and was believed to be due to the positions of the operating team and of the wound with respect to the air flow. Prospectively accumulated factors (such as the experience of the surgeon, the duration of surgery, the diagnosis, and the patient's age) as well as retrospectively accumulated factors (such as predisposing conditions of the patient) did not explain the observed patterns of infection