15,493 research outputs found

    A Frequency-Reconfigurable Monopole Antenna with Switchable Stubbed Ground Structure

    Get PDF
    A frequency-reconfigurable coplanar-waveguide (CPW) fed monopole antenna using switchable stubbed ground structure is presented. Four PIN diodes are employed in the stubs stretching from the ground to make the antenna reconfigurable in three operating modes: a single-band mode (2.4-2.9 GHz), a dual-band mode (2.4-2.9 GHz/5.09-5.47 GHz) and a triple-band mode (3.7-4.26 GHz/5.3-6.3 GHz/8.0-8.8 GHz). The monopole antenna is resonating at 2.4 GHz, while the stubs produce other operating frequency bands covering a number of wireless communication systems, including WLAN, WiMAX, C-band, and ITU. Furthermore, an optimized biasing network has been integrated into this antenna, which has little influence on the performance of the antenna. This paper presents, compares and discusses the simulated and measured results

    A rapid staining-assisted wood sampling method for PCR-based detection of pine wood nematode Bursaphelenchus xylophilus in Pinus massoniana wood tissue

    Get PDF
    For reasons of unequal distribution of more than one nematode species in wood, and limited availability of wood samples required for the PCR-based method for detecting pinewood nematodes in wood tissue of Pinus massoniana, a rapid staining-assisted wood sampling method aiding PCR-based detection of the pine wood nematode Bursaphelenchus xylophilus (Bx) in small wood samples of P. massoniana was developed in this study. This comprised a series of new techniques: sampling, mass estimations of nematodes using staining techniques, and lowest limit Bx nematode mass determination for PCR detection. The procedure was undertaken on three adjoining 5-mg wood cross-sections, of 0.5 · 0.5 · 0.015 cm dimension, that were cut from a wood sample of 0.5 · 0.5 · 0.5 cm initially, then the larger wood sample was stained by acid fuchsin, from which two 5-mg wood cross-sections (that adjoined the three 5-mg wood cross-sections, mentioned above) were cut. Nematode-staining-spots (NSSs) in each of the two stained sections were counted under a microscope at 100· magnification. If there were eight or more NSSs present, the adjoining three sections were used for PCR assays. The B. xylophilus – specific amplicon of 403 bp (DQ855275) was generated by PCR assay from 100.00% of 5-mg wood cross-sections that contained more than eight Bx NSSs by the PCR assay. The entire sampling procedure took only 10 min indicating that it is suitable for the fast estimation of nematode numbers in the wood of P. massonina as the prelimary sample selections for other more expensive Bx-detection methods such as PCR assay

    Induced Growth of Asymmetric Nanocantilever Arrays on Polar Surfaces

    Get PDF
    ©2003 The American Physical Society. The electronic version of this article is the complete one and can be found online at: http://link.aps.org/doi/10.1103/PhysRevLett.91.185502DOI: 10.1103/PhysRevLett.91.185502We report that the Zn-terminated ZnO (0001) polar surface is chemically active and the oxygenterminated (0001) polar surface is inert in the growth of nanocantilever arrays. Longer and wider "comblike" nanocantilever arrays are grown from the (0001)-Zn surface, which is suggested to be a self-catalyzed process due to the enrichment of Zn at the growth front. The chemically inactive (0001)-O surface typically does not initiate any growth, but controlling experimental conditions could lead to the growth of shorter and narrower nanocantilevers from the intersections between (0001)-O with (0110) surfaces

    Marketing strategy for small application service providers in a new market

    Full text link
    Small to medium-sized enterprises (SMEs) including small application service providers (ASPs) are playing an increasingly important role in the development of global economies particularly in developing countries like China. This paper studies marketing strategies of small application service providers (ASP) with a focus on what the important factors are to establish a new ASP business in China. An analytical hierarchy process (AHP) method is used to analyse critical factors of the ASP industry. The research surveyed CEOs or senior managers who are working in ASP firms, to identify how a marketing strategy can be developed for an ASP firm to start business in China. It is found that the localisation of middle level managers, the localisation of products and services, the protection of intellectual property (IP), and infrastructure and transportation system are the most important factors for small ASP firms to do business in China.<br /

    A web system trace model and its application to web design

    Full text link
    Traceability analysis is crucial to the development of web-centric systems, particularly those with frequent system changes, fine-grained evolution and maintenance, and high level of requirements uncertainty. A trace model at the level of the web system architecture is presented in this paper to address the specific challenges of developing web-centric systems. The trace model separates the concerns of different stakeholders in the web development life cycle into viewpoints; and classifies each viewpoint into structure and behaviour. Tracing relationships are presented along two dimensions: within viewpoints; and among viewpoints. Examples of tracing relationships are presented using UML. This trace model is demonstrated through its application to the design of a commercial web project using a web-design process. The design artifacts in each activity are transformed based on the artifacts tracing relationship in the trace model. The model provides mechanisms for verification of consistency, completeness and coverage within each viewpoint and the connectedness across viewpoints

    Separation of concerns: A web application architecture framework

    Full text link
    Architecture frameworks have been extensively developed and described within the literature. These frameworks typically support and guide organisations during system planning, design, building, deployment and maintenance. Their main pupose is to provide clarity to the different modelling perspectives, abstractions, and domains of consideration within system development. In dpoing so they allow improved clarity with regard to the connections between the different models, and the selection of models tht are most likely to capture salient features of the system. In this paper we present an Architectural Framework which takes into account the specific characteristics of web systems. The framework is based around a two dimensional matrix. One dimension separates the concerns of different participants of the web system into perspectives. The second dimension classifies each perspective into development abstractions: structure (what), behaviour (how), location (where) and pattern. The framework is illustrated through examples from the development of a commercial web application

    Effects of mucor mucedo on corncob decomposition in pyr-contaminated soil remediation

    Full text link
    The effect of polycyclic aromatic hydrocarbon and highly effective degradation fungi Mucor mucedo (MU) was studied on corncob decomposition in Pyr-contaminated soil for 120 days to identify the impact of a degradable immobilized carrier on the remediation of soil contaminated by persistent organic pollutants. Results showed that the corncob was mainly composed of hemicelluloses, cellulose, and water dissolved (WD) material, which accounted for 85 percent of its total weight. MU addition significantly affected corncob decomposition. Thus, humic acid production and WD and benzene-ethanol dissolved material degradation increased. The peaking of the WD content was delayed for 30 days or more. The extractable pyrene content positively correlated with the WD content in the corncob during the decomposition. These results theoretically support a refined remediation principle of immobilized microorganisms
    corecore