Thermal conductivity and electrical resistivity of porous materials

Process for determining thermal conductivity and electrical resistivity of porous materials is described. Characteristics of materials are identified and used in development of mathematical models. Limitations of method are examined

Fluid mechanics of waste water disposal in the ocean

Outfall pipes into the ocean are analogous to chimneys in the atmosphere: they are each intended for returning contaminated fluids to the environment in a way that promotes adequate transport and dispersion of the waste fluids. A waste-water treatment plant and an adjoining outfall constitute a system for environmental control; it is practically never feasible to provide such complete treatment that an outfall is not necessary, nor is it common to depend entirely on an outfall with no treatment. Although outfalls and chimneys are functionally similar, there are important differences in their relationships to the coastal waters and atmosphere respectively. Urban and industrial areas, generating waste water, are located along the shallow edge of the ocean, with often tens or even hundreds of kilometers of continental shelf between the shoreline and the deep ocean. The bottom slope on the shelf is typically less than one percent. Thus outfalls extending several kilometers offshore discharge into a body of water of large lateral extent compared to the depth, and are still remote from the main body of ocean water. In contrast, most atmospheric contaminants are introduced at the base of the atmosphere and circulate throughout the whole atmosphere much more readily. Vertical convection mixes the troposphere rapidly in most places and the wind systems circulate the air around the globe in a matter of weeks. Outfalls and chimneys are useful in reducing pollutant concentrations only locally. Far away from the sources, it makes little difference how the pollutants are discharged. The decay times of the pollutants are important in the choice of effective discharge strategies. For example, the problems of very persistent contaminants such as DDT cannot be alleviated by dispersion from an outfall; such pollutants must be intercepted at the source and prevented from entering the environment. On the other hand, degradable organic wastes, as in domestic sewage, may be effectively disposed of through a good ocean outfall. Since the decay time is only a few days, potential problems are only local, and not regional or global

Functional Optical Topography Analysis Using Statistical Parametric Mapping (SPM) Methodology with and without Physiological Confounds

Functional optical topography (OT) measures the changes in oxygenated and deoxygenated hemoglobin (HbO(2), HHb) across multiple brain sites which occur in response to neuronal activation of the cerebral cortex. However, identification of areas of cortical activation is a complex task due to intrinsic physiological noise and systemic interference and careful statistical analysis is therefore required. A total of 10 young healthy adults were studied. The activation paradigm comprised of anagrams followed by finger tapping. 12 channels of the OT system were positioned over the frontal cortex and 12 channels over the motor cortex while the systemic physiology (mean blood pressure (MBP), heart rate (HR), scalp flux) was simultaneously monitored. Analysis was done using the functional Optical Signal Analysis (fOSA) software and Statistical Parametric Mapping (SPM), where we utilized two approaches: (i) using only HbO(2) as a regressor in the general linear model (GLM) and (ii) using all of the explanatory variables (HbO(2), MBP, HR and scalp flux) as regressors. Group analysis using SPM showed significant correlation in a large number of OT channels between HbO(2) and systemic regressors; however no differences in activation areas were seen between the two approaches

Profiles, Use, and Perceptions of Singapore Multiple Credit Cardholders

This study analyzes Singapore’s diverse cardholders in search of variations among demographic groups, credit card profiles, and their perceptions with regards to credit card ownership and use, it then discusses possible reasons governing Singaporeans’ credit card ownership and use. A survey was conducted (n = 636), decision trees were then constructed using Chi-square automatic interaction detection algorithm (CHAID) and SPSS software AnswerTree to examine the association between the number of credit cards (target variable) and the demographic characteristics, perceptions and other credit card related variables. The number of credit cards was found to be significantly influenced by income and gender as well as perceptions that include “credit card leads to overspending”, “savings as payment source”, “unreasonable interest rates”, “credit card as status symbol”. The number of credit cards was also affected by credit card related variables such as missing payments sometimes, frequency of use, entertainment expenditures, and petrol purchase. This research provides an in-depth understanding of Singaporean multiple cardholders, thus it is useful in designing marketing strategies for card-issuers as well as anti-debt strategies for policy-makers in Singapore. Despite the importance of consumer credit, virtually no literature or research exists on the ownership and use of credit cards in Singapore, so this paper intends to close this gap. Further, by combining the demographics, cardholders’ profiles and usage patterns with the respondents’ perceptions concerning credit card ownership and use, our study offers a richer analysis to explain consumer behavior than previous literatures.Credit card ownership, credit card use, credit revolving, credit debts, decision tree, Singapore

Fundamental study of transpiration cooling

Isothermal and non-isothermal pressure drop data and heat transfer data generated on porous 304L stainless steel wire forms, sintered spherical stainless steel powder, and sintered spherical OFHC copper powder are reported and correlated. Pressure drop data was collected over a temperature range from 500 R to 2000 R and heat transfer data collected over a heat flux range from 5 to 15 BTU/in2/sec. It was found that flow data could be correlated independently of transpirant temperature and type (i.e., H2, N2). It was also found that no simple relation between heat transfer coefficient and specimen porosity was obtainable

Evaluation of the utility of sediment data in NASQAN (National Stream Quality Accounting Network)

Monthly suspended sediment discharge measurements, made by the USGS as part of the National Stream Quality Accounting Network (NASQAN), are analysed to assess the adequacy in terms of spatial coverage, temporal sampling frequency, accuracy of measurements, as well as in determining the sediment yield in the nation's rivers. It is concluded that the spatial distribution of NASQAN stations is reasonable but necessarily judgemental. The temporal variations of sediment data contain much higher frequencies than monthly. Sampling error is found to be minor when compared with other causes of data scatter which can be substantial. The usefulness of the monthly measurements of sediment transport is enhanced when combined with the daily measurements of water discharge. Increasing the sampling frequency moderately would not materially improve the accuracy of sediment yield determinations

Water resource problems of energy projects in the Colorado River Basin

The successful development of western coal and oil shale deposits is dependent, to a significant degree, on the availability of adequate water supplies. EQL is involved in a study of the aggregate effects of various energy activities in the upper Colorado River Basin on downstream water quantity and quality. These activities will tend to reduce the available water in the river, and could increase its salinity, which is already so high as to interfere with downstream domestic and agricultural use

Delivery Systems and Initial Dilution

The discharge of municipal waste into the ocean has been practiced for many decades by coastal communities. There are basically two methods of transporting the waste from the treatment works to the discharge point: 1. via an outfall pipeline for effluent or sludge, and 2. for sludge, by means of barges or vessels