Hypoglycemic Effects of Polyphenol Complexes from Bilberry Leaves and Fruits Sorbed on Brown Buckwheat Flour -- Experimental Evaluation and Prospects of Use

The effects of plant polyphenols on carbohydrate and/or lipid metabolism disorders have wide experimental and clinical justification; however, their effects are limited due to low bioavailability. Thus, the development of technological approaches enhancing their effectiveness and stability is relevant.The aim of this work was to evaluatein vivothe effects of polyphenols from bilberry leaves and fruits, sorbed on the brown buckwheat flour, on C57Bl/6c mice with carbohydrate and lipid metabolism disorders. We assessed in vivothe effect of a food matrix (FM1: bilberry leaf polyphenols sorbed on brown buckwheat flour) on C57Bl/6c mice with induced carbohydrate and lipid metabolism disorders. The aim of the second experiment was to evaluate the effectiveness of prolonged prophylactic consumption of another food matrix (FM2: billberry fruit polyphenols, sorbed on brown buckwheat flour) by C57Bl/6c micewith induced carbohydrate and lipid metabolism disorders. Technological approaches were developed and pilot batches of the food matrices FM1 and FM2were obtained. According to the in vivo testing, a significant decrease in the glucose levels and normalization of glucose tolerance and insulin sensitivity were found in animals treated with FM1. When assessing the in vivo effects of FM2, the hypoglycemic effect of bilberry fruit polyphenols in the composition of the matrix was established. The results of these studies can be used to justify the testing of the developed matrices in a clinical setting and using them as functional food ingredients for preventative nutrition in cases of carbohydrate metabolism disorders. Keywords: polyphenols, food matrix, functional food ingredient, carbohydrate metabolism, lipid metabolis

Influence of oil combinations on the structural properties of oleogels

Studies of the effect of combinations of vegetable oils on the properties of oleogels will provide useful information from a technological viewpoint for the optimal choice of the composition of the oleogel used, as well as regulate the fatty acid composition of food products based on oleogels. This work aimed to study the effect of combinations of sunflower and linseed oils on the properties of oleogels structured with beeswax. As a result of the studies carried out, data were obtained on the change in the structure of oleogels depending on the ratio of oils, which, from a practical viewpoint, in the future, will make it possible to expand the range of food products containing oleogels

Waxy Oleogels for Partial Substitution of Solid Fat in Margarines

One of the research directions of oleogels is to study the possibility of their practical application in the food industry as an alternative to solid fats. In this work, the possibility of replacing solid fat in margarine (fat content 82.5%) with oleogels was evaluated. The oleogel content varied from 10 to 50% of the fat phase. The concentration of gelator for which beeswax or wax components (9:1 combination of beeswax and hydrocarbons) were used represented 3% in oleogels. The fatty acid composition of the fat components used, their textural characteristics, and their color were studied. The following physicochemical and rheological properties of margarines were determined: color values, textural and thermal characteristics, and sensory properties. The data obtained were processed using principal component analysis (PCA). Oleogels were characterized by lower textural properties compared to commercial fat (CF), but a lower content of saturated fatty acids. When using oleogels, the color characteristics of the margarines changed insignificantly. A decrease in textural and organoleptic properties was shown when using more than 30% oleogel in the composition of margarines. It was found that an increase in the proportion of oleogel leads to a decrease in the melting enthalpy of margarines. The margarines, depending on the ratio of oleogel in the fat phase, were characterized by a content of saturated fatty acids reduced by 7–35% and increased by a 18–92% level of polyunsaturated fatty acids. Thus, the application of oleogels in margarine technology makes it possible to adjust the fatty acid composition while improving the physicochemical properties

Ultrasonic Treatment of Food Colloidal Systems Containing Oleogels: A Review

The use of oleogels as an alternative to solid fats to reduce the content of saturated and trans-isomeric fatty acids is a developing area of research. Studies devoted to the search for methods of obtaining oleogels with given properties are of current interest. Ultrasonic treatment as a method for modifying oleogel properties has been used to solve this problem. The number of publications on the study of the effect of ultrasonic treatment on oleogel properties is increasing. This review aimed to systematize and summarize existing data. It allowed us to identify the incompleteness of this data, assess the effect of ultrasonic treatment on oleogel properties, which depends on various factors, and identify the vector of this direction in the food industry. A more detailed description of the parameters of ultrasonic treatment is needed to compare the results between various publications. Ultrasonic treatment generally leads to a decrease in crystal size and an increase in oil-binding capacity, rheological properties, and hardness. The chemical composition of oleogels and the concentration of gelators, the amplitude and duration of sonication, the cooling rate, and the crystallization process stage at which the treatment occurs are shown to be the factors influencing the efficiency of the ultrasonic treatment

A Study of the Quantitative Relationship between Yield Strength and Crystal Size Distribution of Beeswax Oleogels

Beeswax and beeswax hydrocarbon-based oleogels were studied to evaluate the quantitative relationship between their yield strength and crystal size distribution. With this aim, oleogels were prepared using four different cooling regimes to obtain different crystal size distributions. The microstructure was evaluated by polarized light microscopy. The yield strength is measured by the cone penetration test. Oleogels were characterized by average grain size, microstructure entropy, grain boundary energy per unit volume, and microstructure temperature. We have provided the theoretical basis for interpreting the microstructure and evaluating the microstructure-based hardening of oleogels. It is shown that the microstructure entropy might be used to predict the yield strength of oleogels by the Hall-Petch relationship

The Influence of Edible Oils’ Composition on the Properties of Beeswax-Based Oleogels

This study aimed to find relationships between the properties of beeswax-based oleogels and the type of oil used. The influence of linseed, sunflower, olive, and fish oils was studied. For these oils, the fatty acid composition, the content of total polar components, and the iodine value were characterized. Textural and thermodynamic properties were determined for oleogels, the oil-binding capacity was estimated, and the morphology of crystals was studied. The concentration of beeswax in all oleogels was 6.0% w/w. It was shown that the type of oil has a significant influence on all characteristics of the oleogels. The use of different oils at the same technological treatment leads to the formation of crystals of diverse morphology—from platelets to spherulites. At the same time, it was revealed that some characteristics of oils have a varying contribution to the properties of oleogels. The content of total polar materials in oils is associated with a decrease in strength parameters (yield value and elastic modulus) and the oil-binding capacity of oleogels. In its turn, the iodine value of oils has a close positive correlation with the melting and crystallization temperatures of oleogels. The results obtained in this article indicate that the properties of beeswax-based oleogels can be directed by changing the oil composition

Development of Fermented Kombucha Tea Beverage Enriched with Inulin and B Vitamins

Kombucha is a sweet and sour beverage made by fermenting a liquid base with a symbiotic culture of bacteria and yeast. Different tea substrates, carbohydrate sources, and additional ingredients are used to create beverages with different physical and chemical characteristics. The purpose of this work was to create a recipe and technology to study the properties of the beverage based on kombucha with a given chemical composition. The content of added functional ingredients (vitamins and inulin) in quantities comparable with reference daily intake was the specified parameter characterizing the distinctive features of the enriched beverages. For fermentation using symbiotic cultures of bacteria and yeast, a black tea infusion sweetened with sucrose was used as a substrate. The changes in the physicochemical characteristics of the fermented tea beverage base were evaluated. The dynamics of changes in pH, acidity, the content of mono- and disaccharides, ethanol, organic acids, polyphenolic compounds, and volatile organic substances were shown. The fermentation conditions were selected (pH up to 3.3 ± 0.3, at T = 25 ± 1 °C, process duration of 14 days) to obtain the beverage base. Strawberry and lime leaves were used as flavor and aroma ingredients, and vitamins with inulin were used as functional ingredients. Since the use of additional ingredients changed the finished beverage’s organoleptic profile and increased its content of organic acids, the final product’s physical–chemical properties, antioxidant activity, and organoleptic indicators were assessed. The content of B vitamins in the beverages ranges from 29 to 44% of RDI, and 100% of RDI for inulin, which allows it to be attributed to the category of enriched products. The DPPH inhibitory activity of the beverages was 82.0 ± 7%, and the ethanol content did not exceed 0.43%. The beverages contained a variety of organic acids: lactic (43.80 ± 4.82 mg/100 mL), acetic (205.00 ± 16.40 mg/100 mL), tartaric (2.00 ± 0.14 mg/100 mL), citric (65.10 ± 5.86 mg/100 mL), and malic (45.50 ± 6.37 mg/100 mL). The technology was developed using pilot equipment to produce fermented kombucha tea enriched with inulin and B vitamins

Determination and Comparison of Soybean Lecithin and Bovine Brain Plasmalogens Effects in Healthy Male Wistar Rats

The aim of this study was to investigate the effects of soybean lecithin and plasmalogens concentrating on a variety of physiological tests and biochemical analyses in healthy Wistar rats. For six weeks, male Wistar rats were given a standard diet that included plasmalogens or soybean lecithin. We measured anxiety levels, overall exploratory activity, short- and long-term memory, cognitive abilities, and grip strength. Lecithin increased significantly anxiety and enhanced memory and cognitive functions. Plasmalogens significantly improved appetite and increased grip strength. When compared to plasmalogens, lecithin significantly raised HDL levels while lowering LDL levels. The plasmalogens group showed a significant increase in the C16:0DMA/C16:0 ratio, which led us to assume that plasmalogen consumption could increase their synthesis in neural tissue. The study’s findings imply that, despite their various modes of action, soy lecithin and plasmalogens may both be significant nutritional components for enhancing cognitive functions

Complex of polyphenols sorbed on buckwheat flour as a functional food ingredient

An innovative approach to creating a new generation of specialised foods for dietary therapy of type 2 diabetes can involve planned adding of plant polyphenols to their formulafions. The marked antioxidant properties of polyphenols largely determine their potential antidiabetic effects. However, the use of food polyphenols for prophylactic purposes is limited by their low bioavailability, which makes it expedient to search for technological approaches aimed at obtaining polyphenolic matrices with high biological activity, increased digestibility, and stability. This study objective was to purposely extract and concentrate the polyphenols by sorbing them from an aqueous solution of the bilberry leaf extract (BLE) on buckwheat flour and to assess their storage stability. A number of experiments on optimal parameters selection for sorbing polyphenols from the BLE on buckwheat flour were performed. The parameters included the concentration of the extract solution, the solution/sorbent ratio, the pH of the solution, the temperature and the time of sorption. The sorption on the polyphenol matrix was determined from the difference in their contents in the initial solution of the extract and in the supernatant after centrifugation by the FolinCiocalteu method. The effects of exposure to light, temperatures, and humidity on the polyphenol compounds in the dry BLE and in the food matrix contents during storage was analysed by the FTIR spectroscopy. The experiments determined the optimal conditions for the BLE polyphenol sorption on buckwheat flour by incubation of a 2% BLE solution pH = 3.6 with the portion of buckwheat flour at the ratio of 1g/50 cm3 solution for 45 minutes at 25°C. When storing the food matrix, there was no significant degradation of the polyphenolic compounds in the food matrix, which indicates an increase in the stability of the polyphenols sorbed on buckwheat flour. This paper presents the results that are scientifically and practically relevant for the nutritiology experts who devise promising technological approaches to expanding the range of functional food ingredients of the antidiabetic character