1,749 research outputs found
Status Report on Efforts to Enhance Instrumentation to Support Advanced Test Reactor Irradiations
The Department of Energy (DOE) designated the Advanced Test Reactor (ATR) as a National Scientific User Facility (NSUF) in April 2007 to support U.S. leadership in nuclear science and technology. By attracting new research users - universities, laboratories, and industry - the ATR NSUF facilitates basic and applied nuclear research and development, further advancing the nation's energy security needs. A key component of the ATR NSUF effort is to prove new in-pile instrumentation techniques that are capable of providing real-time measurements of key parameters during irradiation. To address this need, an assessment of instrumentation available and under-development at other test reactors was completed. Based on this review, recommendations were made with respect to what instrumentation is needed at the ATR; and a strategy was developed for obtaining these sensors. In 2009, a report was issued documenting this program’s strategy and initial progress toward accomplishing program objectives. In 2009, a report was issued documenting this instrumentation development strategy and initial progress toward accomplishing instrumentation development program objectives. This document reports progress toward implementing this strategy in 2010
Warming Up Density Functional Theory
Density functional theory (DFT) has become the most popular approach to
electronic structure across disciplines, especially in material and chemical
sciences. Last year, at least 30,000 papers used DFT to make useful predictions
or give insight into an enormous diversity of scientific problems, ranging from
battery development to solar cell efficiency and far beyond. The success of
this field has been driven by usefully accurate approximations based on known
exact conditions and careful testing and validation. In the last decade,
applications of DFT in a new area, warm dense matter, have exploded. DFT is
revolutionizing simulations of warm dense matter including applications in
controlled fusion, planetary interiors, and other areas of high energy density
physics. Over the past decade or so, molecular dynamics calculations driven by
modern density functional theory have played a crucial role in bringing
chemical realism to these applications, often (but not always) with excellent
agreement with experiment. This chapter summarizes recent work from our group
on density functional theory at non-zero temperatures, which we call thermal
DFT. We explain the relevance of this work in the context of warm dense matter,
and the importance of quantum chemistry to this regime. We illustrate many
basic concepts on a simple model system, the asymmetric Hubbard dimer
The Double Disparity Facing Rural Local Health Departments
Residents of rural jurisdictions face significant health challenges, including some of the highest rates of risky health behaviors and worst health outcomes of any group in the country. Rural communities are served by smaller local health departments (LHDs) that are more understaffed and underfunded than their suburban and urban peers. As a result of history and current need, rural LHDs are more likely than their urban peers to be providers of direct health services, leading to relatively lower levels of population-focused activities. This review examines the double disparity faced by rural LHDs and their constituents: pervasively poorer health behaviors and outcomes and a historical lack of investment by local, state, and federal public health entities
Parity Violation in Neutron Resonances in 107,109Ag
Parity nonconservation (PNC) was studied in p-wave resonances in Ag by measuring the helicity dependence of the neutron total cross section. Transmission measurements on natural Ag were performed in the energy range 32 to 422 eV with the time-of-flight method at the Manuel Lujan Neutron Scattering Center at Los Alamos National Laboratory. A total of 15 p-wave neutron resonances were studied in 107Ag and ninep-wave resonances in 109Ag. Statistically significant asymmetries were observed for eight resonances in 107Ag and for four resonances in109Ag. An analysis treating the PNC matrix elements as random variables yields a weak spreading width of Γw=(2.67-1.21+2.65)×10-7 eV for107Ag and Γw=(1.30-0.74+2.49)×10-7 eV for 109Ag
Parity Violation in Neutron Resonances in 115In
Parity nonconservation (PNC) was studied in p-wave resonances in indium by measuring the helicity dependence of the neutron total cross section in the neutron energy range 6.0–316 eV with the time-of-flight method at LANSCE. A total of 36 p-wave neutron resonances were studied in 115In, and statistically significant asymmetries were observed for nine cases. An analysis treating the PNC matrix elements as random variables yields a weak matrix element of M=(0.67-0.12+0.16) meV and a weak spreading width of Γw=(1.30-0.43+0.76)×10-7 eV
Recommended from our members
Long Duration Testing of Type C Thermocouples at 1500 °C
Experience with Type C thermocouples operating for long periods in the 1400 to 1600 °C temperature range indicate that significant decalibration occurs, often leading to expensive downtime and material waste. As part of an effort to understand the mechanisms causing drift in these thermocouples, the Idaho National Laboratory conducted a long duration test at 1500 °C containing eight Type C thermocouples. As report in this document, results from this long duration test were adversely affected due to oxygen ingress. Nevertheless, results provide key insights about the impact of precipitate formation on thermoelectric response. Post-test examinations indicate that thermocouple signal was not adversely impacted by the precipitates detected after 1,000 hours of heating at 1,500 °C and suggest that the signal would not have been adversely impacted by these precipitates for longer durations (if oxygen ingress had not occurred in this test)
Recommended from our members
HIGH TEMPERATURE IRRADIATION RESISTANT THERMOCOUPLES – A LOW COST SENSOR FOR IN-PILE TESTING AT HIGH TEMPERATURES
Several options have been identified to improve recently-developed Idaho National Laboratory (INL) High Temperature Irradiation Resistant ThermoCouples (HTIR-TCs) for in-pile testing. These options have the potential to reduce fabrication costs and allow HTIR-TC use in higher temperature applications (up to at least 1800 °C). The INL and the University of Idaho (UI) investigated these options with the ultimate objective of providing recommendations for alternate thermocouple designs that are optimized for various applications. This paper summarizes results from these INL/UI investigations. Specifically, results are reported about several options found to enhance HTIR-TC performance, such as improved heat treatments, alternate geometries, alternate fabrication techniques, and the use of copper/nickel alloys as soft extension cable
Recommended from our members
HTIR-TC Compensating Extension Wire Evaluations
In an effort to reduce production costs for the doped molybdenum/niobium alloy High Temperature Irradiation Resistant Thermocouples (HTIR-TCs) recently developed by the Idaho National Laboratory, a series of evaluations were completed to identify an optimum compensating extension cable. As documented in this report, results indicate that of those combinations tested, two inexpensive, commercially-available copper nickel alloy wires approximate the low temperature (0 to 500 °C) thermoelectric output of KW-Mo (molybdenum doped with tungsten and potassium silicate) versus Nb-1%Zr in HTIR-TCs. For lower temperatures (0 to 150 °C), which is the region where soft extension cable is most often located, results indicate that the thermocouple emf is best replicated by the Cu-3.5%Ni versus Cu-5%Ni combination (measured emfs were within 4% at 100 and 150 °C). At higher temperatures (300 to 500 °C), data suggest that the Cu-5%Ni versus Cu-10%Ni combination may yield data closer to that obtained with KWMo versus Nb-1%Zr wires (measured emfs were within 8%)
Recommended from our members
Viability of Pushrod Dilatometry Techniques for High Temperature In-Pile Measurements
To evaluate the performance of new fuel, cladding, and structural materials for use in advanced and existing nuclear reactors, robust instrumentation is needed. Changes in material deformation are typically evaluated out-of-pile, where properties of materials are measured after samples were irradiated for a specified length of time. To address this problem, a series of tests were performed to examine the viability of using pushrod dilatometer techniques for in-pile instrumentation to measure deformation. The tests were performed in three phases. First, familiarity was gained in the use and accuracy of this system by testing samples with well defined thermal elongation characteristics. Second, high temperature data for steels, specifically SA533 Grade B, Class 1 (SA533B1) Low Alloy Steel and Stainless Steel 304 (SS304), found in Light Water Reactor (LWR) vessels, were aquired. Finally, data were obtained from a short pushrod in a horizontal geometry to data obtained from a longer pushrod in a vertical geometry, the configuration likely to be used for in-situ measurements. Results of testing show that previously accepted data for the structural steels tested, SA533B1 and SS304, are inaccurate at high temperatures (above 500 oC) due to extrpolation of high temperature data. This is especially true for SA533B1, as previous data do not account for the phase transformation of the material between 730 oC and 830 oC. Also, comparison of results for horizontal and vertical configurations show a maximum percent difference of 2.02% for high temperature data
Recommended from our members
New Sensors for In-Pile Temperature Detection at the Advanced Test Reactor National Scientific User Facility
The Department of Energy (DOE) designated the Advanced Test Reactor (ATR) as a National Scientific User Facility (NSUF) in April 2007 to support U.S. leadership in nuclear science and technology. As a user facility, the ATR is supporting new users from universities, laboratories, and industry, as they conduct basic and applied nuclear research and development to advance the nation’s energy security needs. A key component of the ATR NSUF effort is to develop and evaluate new in-pile instrumentation techniques that are capable of providing measurements of key parameters during irradiation. This paper describes the strategy for determining what instrumentation is needed and the program for developing new or enhanced sensors that can address these needs. Accomplishments from this program are illustrated by describing new sensors now available and under development for in-pile detection of temperature at various irradiation locations in the ATR
- …