The RFOFO Ionization Cooling Ring for Muons

Practical ionization cooling rings could lead to lower cost or improved performance in neutrino factory or muon collider designs. The ring modeled here uses realistic three-dimensional fields. The performance of the ring compares favorably with the linear cooling channel used in the second US Neutrino Factory Study. The normalized 6D emittance of an ideal ring is decreased by a factor of approximately 240, compared with a factor of only 15 for the linear channel. We also examine such \textit{real-world} effects as windows on the absorbers and rf cavities and leaving empty lattice cells for injection and extraction. For realistic conditions the ring decreases the normalized 6D emittance by a factor of 49.Comment: 27 pages, 18 figures and 5 tables. Submitted to Phys. Rev. ST-A

Nanoparticulate CpG Immunotherapy in RAO- Affected Horses: Phase I and IIa Study

Background: Recurrent airway obstruction (RAO), an asthma-like disease, is 1 of the most common allergic diseases in horses in the northern hemisphere. Hypersensitivity reactions to environmental antigens cause an allergic inflammatory response in the equine airways. Cytosine-phosphate-guanosine-oligodeoxynucleotides (CpG-ODN) are known to direct the immune system toward a Th1-pathway, and away from the pro-allergic Th2-line (Th2/Th1-shift). Gelatin nanoparticles (GNPs) are biocompatible and biodegradable immunological inert drug delivery systems that protect CpG-ODN against nuclease degeneration. Preliminary studies on the inhalation of GNP-bound CpG-ODN in RAO-affected horses have shown promising results. Objectives: The aim of this study was to evaluate the clinical and immunological effects of GNP-bound CpG-ODN in a double-blinded, placebo-controlled, prospective, randomized clinical trial and to verify a sustained effect post-treatment. Animals and Methods: Twenty-four RAO-affected horses received 1 inhalation every 2 days for 5 consecutive administrations. Horses were examined for clinical, endoscopic, cytological, and blood biochemical variables before the inhalation regimen (I), immediately afterwards (II), and 4 weeks post-treatment (III). Results: At time points I and II, administration of treatment rather than placebo corresponded to a statistically significant decrease in respiratory effort, nasal discharge, tracheal secretion, and viscosity, AaDO2 and neutrophil percentage, and an increase in arterial oxygen pressure. Conclusion and Clinical Importance: Administration of a GNP-bound CpG-ODN formulation caused a potent and persistent effect on allergic and inflammatory-induced clinical variables in RAO-affected horses. This treatment, therefore, provides an innovative, promising, and well-tolerated strategy beyond conventional symptomatic long-term therapy and could serve as a model for asthma treatment in humans

Physical, chemical and kinetic factors affecting prion infectivity

The mouse-adapted scrapie prion strain RML is one of the most widely used in prion research. The introduction of a cell culture-based assay of RML prions, the scrapie cell assay (SCA) allows more rapid and precise prion titration. A semi-automated version of this assay (ASCA) was applied to explore a range of conditions that might influence the infectivity and properties of RML prions. These include resistance to freeze-thaw procedures; stability to endogenous proteases in brain homogenate despite prolonged exposure to varying temperatures; distribution of infective material between pellet and supernatant after centrifugation, the effect of reducing agents and the influence of detergent additives on the efficiency of infection. Apparent infectivity is increased significantly by interaction with cationic detergents. Importantly, we have also elucidated the relationship between the duration of exposure of cells to RML prions and the transmission of infection. We established that the infection process following contact of cells with RML prions is rapid and followed an exponential time course, implying a single rate-limiting process

Selective methane oxidation over promoted oxide catalysts. Quarterly report, March 1 - May 31, 1996

Series of catalysts consisting of MoO{sub 3}, V{sub 2}O{sub 5}, TiO{sub 2}, and SnO{sub 2} impregnated onto oxide supports consisting of SiO{sub 2} (Cab-O-Sil), TiO{sub 2} or SnO{sub 2} were previously prepared and tested for the selective oxidation of methane to oxygenates, and it was found that the V{sub 2}O{sub 5}/SiO{sub 2} catalyst was the most active and most selective toward the formation of formaldehyde. These catalysts have been characterized by laser Raman spectroscopy after dehydration and during the methane oxidation reaction with a CH{sub 4}/02 = 10/1 reaction mixture at 500{degrees}C in a continuous flow in situ reaction cell. With the V{sub 2}O{sub 5}/SiO{sub 2} catalyst (the most active catalyst among those studied), no significant structural changes were revealed by in situ Raman analyses, indicating that the fully oxidized surface sites were related to the high formaldehyde selectivivity. Over the V{sub 2}O{sub 5}/TiO{sub 2} and V{sub 2}O{sub 5}/SnO{sub 2} catalysts, CO and CO{sub 2} were the principal products produced by oxidation of methane. For the first time, in situ Raman analysis clearly showed that for these latter catalysts, the surface vanadium(V) oxide species were partially reduced under the steady-state reaction conditions. The performance of the V{sub 2}O{sub 5}/TiO{sub 2}/SiO{sub 2} catalyst was similar to that of the V{sub 2}O{sub 5}TiO{sub 2} catalyst, consistent with the earlier observation that vanadia was largely bound to the titania overlayer. It appears that formaldehyde selectivity decreased with increasing catalyst reducibility, but no direct correlation of catalyst activity with reductibility was observed

Proton acceleration by irradiation of isolated spheres with an intense laser pulse

We report on experiments irradiating isolated plastic spheres with a peak laser intensity of 2-3 x 10(20) W cm(-2). With a laser focal spot size of 10 mu m full width half maximum (FWHM) the sphere diameter was varied between 520 nm and 19.3 mu m. Maximum proton energies of similar to 25 MeV are achieved for targets matching the focal spot size of 10 mu m in diameter or being slightly smaller. For smaller spheres the kinetic energy distributions of protons become nonmonotonic, indicating a change in the accelerating mechanism from ambipolar expansion towards a regime dominated by effects caused by Coulomb repulsion of ions. The energy conversion efficiency from laser energy to proton kinetic energy is optimized when the target diameter matches the laser focal spot size with efficiencies reaching the percent level. The change of proton acceleration efficiency with target size can be attributed to the reduced cross-sectional overlap of subfocus targets with the laser. Reported experimental observations are in line with 3D3V particle in cell simulations. They make use of well-defined targets and point out pathways for future applications and experiments.DFG via the Cluster of Excellence Munich-Centre for Advanced Photonics (MAP) Transregio SFB TR18NNSA DE-NA0002008Super-MUC pr48meIvo CermakCGC Instruments in design and realization of the Paul trap systemIMPRS-APSLMUexcellent Junior Research FundDAAD|ToIFEEuropean Union's Horizon research and innovation programme 633053Physic

Selective methane oxidation over promoted oxide catalysts. Quarterly report, December 1, 1995--February 29, 1996

In a systematic study with a CH{sub 4}/air reactant mixture at 600 C and 0.1 MPa, it is demonstrated that among eight Cab-O-Sil supported redox transition metal oxide catalysts, a V{sub 2}O{sub 5}/SiO{sub 2} catalyst exhibited the highest productivities of formaldehyde and methanol. The effect of steam on enhancing the space time yields of the oxygenates was observed with the catalysts that were studied with this third component in the reaction mixture. With the vanadia-containing catalyst, it was shown that a loading of 2 wt% of V{sub 2}O{sub 5} on SiO{sub 2} produced the highest conversion of methane from a CH{sub 4}/air/steam = 4/1/1 reactant mixture and the highest productivities of both CH{sub 3}OH and HCHO. It was also shown that increasing the reactant flow rate (thereby decreasing the contact time) increased the space time yield of methanol but decreased the overall methane conversion level

Rapid Synthesis of Sub-10 nm Hexagonal NaYF4-Based Upconverting Nanoparticles using Therminol® 66

We report a simple one-pot method for the rapid preparation of sub-10 nm pure hexagonal (β-phase) NaYF4-based upconverting nanoparticles (UCNPs). Using Therminol® 66 as a co-solvent, monodisperse UCNPs could be obtained in unusually short reaction times. By varying the reaction time and reaction temperature, it was possible to control precisely the particle size and crystalline phase of the UCNPs. The upconversion (UC) luminescence properties of the nanocrystals were tuned by varying the concentrations of the dopants (Nd3+ and Yb3+ sensitizer ions and Er3+ activator ions). The size and phase-purity of the as-synthesized core and core–shell nanocrystals were assessed by using complementary transmission electron microscopy, dynamic light scattering, X-ray diffraction, and small-angle X-ray scattering studies. In-depth photophysical evaluation of the UCNPs was pursued by using steady-state and time-resolved luminescence spectroscopy. An enhancement in the UC intensity was observed if the nanocrystals, doped with optimized concentrations of lanthanide sensitizer/activator ions, were further coated with an inert/active shell. This was attributed to the suppression of surface-related luminescence quenching effects